Yahoo Groups archive
Thread
2010-02-06 by drifter7508
So, Im fed up with all failures now. Can somebody please point me to a CF kit that actually 100% works with EMAX II. I would not like to buy a slim floppy and such, I'd rather have a the CF kit installed in an external scsi case. Thx.
2010-02-06 by jammie
you are going to find it hard now most kits have been sold buy a acard 7720u scsi to ide adapter by an external scsi cdrom case get a ide to cf adapter try and get a atapi compliant so that it is hot swappable and a 5.25"plate to 3.5" plate reducer for the 3.5" floppy size ide to cf card drive this set up is going to cost you a bit so shop around on ebay for the scsi xternal cdrom case discard the cdrom and the scsi to ide interface
----- Original Message -----
From: drifter7508
To: emax@yahoogroups.com
Sent: Saturday, February 06, 2010 9:20 PM
Subject: [emax] Point me to the places where to buy the right CF kit.
So, Im fed up with all failures now.
Can somebody please point me to a CF kit that actually 100%
works with EMAX II.
I would not like to buy a slim floppy and such, I'd rather have a
the CF kit installed in an external scsi case.
Thx.
------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: 02/06/10 07:35:00
[Non-text portions of this message have been removed]2010-02-06 by drifter7508
Isnt that exactly what I recently bought and failed with? Not the same brand "Acard" but exactly the same spec. I got 2 scsi cases allready. :) --- In emax@yahoogroups.com, "jammie" <jammie.emma@...> wrote:
> > you are going to find it hard now most kits have been sold buy a acard 7720u scsi to ide adapter by an external scsi cdrom case get a ide to cf adapter try and get a atapi compliant so that it is hot swappable > > and a 5.25"plate to 3.5" plate reducer for the 3.5" floppy size ide to cf card drive this set up is going to cost you a bit so shop around on ebay for the scsi xternal cdrom case discard the cdrom and the scsi to ide interface > ----- Original Message ----- > From: drifter7508 > To: emax@yahoogroups.com > Sent: Saturday, February 06, 2010 9:20 PM > Subject: [emax] Point me to the places where to buy the right CF kit. > > > > So, Im fed up with all failures now. > > Can somebody please point me to a CF kit that actually 100% > works with EMAX II. > > I would not like to buy a slim floppy and such, I'd rather have a > the CF kit installed in an external scsi case. > > Thx. > > > > > > > ------------------------------------------------------------------------------ > > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: 02/06/10 07:35:00 > > > [Non-text portions of this message have been removed] >
2010-02-06 by Brandt R. Gassman
What brand of CF cards are you using? How long are you allowing for the cards to format? I just successfully formatted two 1GB CF cards on an Emax II Turbo rack, but each card took about three hours to complete the "Verifying" process. On Feb 6, 2010, at 5:16 PM, drifter7508 wrote: > Isnt that exactly what I recently bought and > failed with? Not the same brand "Acard" > but exactly the same spec. > > I got 2 scsi cases allready. :) > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@...> wrote: > > > > you are going to find it hard now most kits have been sold buy a > acard 7720u scsi to ide adapter by an external scsi cdrom case get a > ide to cf adapter try and get a atapi compliant so that it is hot > swappable > > > > and a 5.25"plate to 3.5" plate reducer for the 3.5" floppy size > ide to cf card drive this set up is going to cost you a bit so shop > around on ebay for the scsi xternal cdrom case discard the cdrom and > the scsi to ide interface > > ----- Original Message ----- > > From: drifter7508 > > To: emax@yahoogroups.com > > Sent: Saturday, February 06, 2010 9:20 PM > > Subject: [emax] Point me to the places where to buy the right CF > kit. > > > > > > > > So, Im fed up with all failures now. > > > > Can somebody please point me to a CF kit that actually 100% > > works with EMAX II. > > > > I would not like to buy a slim floppy and such, I'd rather have a > > the CF kit installed in an external scsi case. > > > > Thx. > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > No virus found in this incoming message. > > Checked by AVG - www.avg.com > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: > 02/06/10 07:35:00 > > > > > > [Non-text portions of this message have been removed] > > > > > [Non-text portions of this message have been removed]
2010-02-06 by drifter7508
I have tried a bunch of different CF cards. Most recently Sandisk 512 Mb oldschool Dos fat 16 preform. cards. No luck. The Emax wont even find the units in the scsi connection. So I cant format anything. :-( --- In emax@yahoogroups.com, "Brandt R. Gassman" <brandt@...> wrote:
> > What brand of CF cards are you using? How long are you allowing for > the cards to format? I just successfully formatted two 1GB CF cards > on an Emax II Turbo rack, but each card took about three hours to > complete the "Verifying" process. > > > On Feb 6, 2010, at 5:16 PM, drifter7508 wrote: > > > Isnt that exactly what I recently bought and > > failed with? Not the same brand "Acard" > > but exactly the same spec. > > > > I got 2 scsi cases allready. :) > > > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > > > you are going to find it hard now most kits have been sold buy a > > acard 7720u scsi to ide adapter by an external scsi cdrom case get a > > ide to cf adapter try and get a atapi compliant so that it is hot > > swappable > > > > > > and a 5.25"plate to 3.5" plate reducer for the 3.5" floppy size > > ide to cf card drive this set up is going to cost you a bit so shop > > around on ebay for the scsi xternal cdrom case discard the cdrom and > > the scsi to ide interface > > > ----- Original Message ----- > > > From: drifter7508 > > > To: emax@yahoogroups.com > > > Sent: Saturday, February 06, 2010 9:20 PM > > > Subject: [emax] Point me to the places where to buy the right CF > > kit. > > > > > > > > > > > > So, Im fed up with all failures now. > > > > > > Can somebody please point me to a CF kit that actually 100% > > > works with EMAX II. > > > > > > I would not like to buy a slim floppy and such, I'd rather have a > > > the CF kit installed in an external scsi case. > > > > > > Thx. > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > > > > > No virus found in this incoming message. > > > Checked by AVG - www.avg.com > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: > > 02/06/10 07:35:00 > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > [Non-text portions of this message have been removed] >
2010-02-06 by Brandt R. Gassman
Ah, OK. I understand the situation now. Sorry if you've shared this information with the group already, but what external SCSI devices have you tried? The external SCSI > IDE > CF I'm using is the Spyrus MC-DISK2, which I purchased from scsiforsamplers.com in 2008 before they ran out. As noted, I successfully formatted two 1GB SanDisk CF cards with this unit (set to SCSI device #3). I've also used this device successfully with my Emulator III (set to device #5). Also, what type of Emax II do you have, and are you running the latest OS (2.14)? My Emax II was running 2.14 when I formatted the cards. On Feb 6, 2010, at 6:09 PM, drifter7508 wrote: > I have tried a bunch of different CF cards. > Most recently Sandisk 512 Mb oldschool > Dos fat 16 preform. cards. No luck. > The Emax wont even find the > units in the scsi connection. So I cant > format anything. :-( > > --- In emax@yahoogroups.com, "Brandt R. Gassman" <brandt@...> wrote: > > > > What brand of CF cards are you using? How long are you allowing for > > the cards to format? I just successfully formatted two 1GB CF cards > > on an Emax II Turbo rack, but each card took about three hours to > > complete the "Verifying" process. > > > > > > On Feb 6, 2010, at 5:16 PM, drifter7508 wrote: > > > > > Isnt that exactly what I recently bought and > > > failed with? Not the same brand "Acard" > > > but exactly the same spec. > > > > > > I got 2 scsi cases allready. :) > > > > > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > > > > > you are going to find it hard now most kits have been sold buy a > > > acard 7720u scsi to ide adapter by an external scsi cdrom case > get a > > > ide to cf adapter try and get a atapi compliant so that it is hot > > > swappable > > > > > > > > and a 5.25"plate to 3.5" plate reducer for the 3.5" floppy size > > > ide to cf card drive this set up is going to cost you a bit so > shop > > > around on ebay for the scsi xternal cdrom case discard the cdrom > and > > > the scsi to ide interface > > > > ----- Original Message ----- > > > > From: drifter7508 > > > > To: emax@yahoogroups.com > > > > Sent: Saturday, February 06, 2010 9:20 PM > > > > Subject: [emax] Point me to the places where to buy the right CF > > > kit. > > > > > > > > > > > > > > > > So, Im fed up with all failures now. > > > > > > > > Can somebody please point me to a CF kit that actually 100% > > > > works with EMAX II. > > > > > > > > I would not like to buy a slim floppy and such, I'd rather > have a > > > > the CF kit installed in an external scsi case. > > > > > > > > Thx. > > > > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > > > > > > > > > No virus found in this incoming message. > > > > Checked by AVG - www.avg.com > > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: > > > 02/06/10 07:35:00 > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > [Non-text portions of this message have been removed]
2010-02-07 by jammie
what make and models did you buy first what jumper settings are you using as this makes a big difference what ide to cf card adapter are you using as some only support pio mode and the scsi to ide needs to be set to this mode to work the cf card that you got is fine they work can you post pictures of set up as i can tell you what jumpers and settings to get it to work so can ted
----- Original Message ----- From: "Brandt R. Gassman" <brandt@...> To: <emax@yahoogroups.com> Sent: Saturday, February 06, 2010 11:41 PM Subject: Re: [emax] Re: Point me to the places where to buy the right CF kit. > Ah, OK. I understand the situation now. Sorry if you've shared this > information with the group already, but what external SCSI devices > have you tried? > > The external SCSI > IDE > CF I'm using is the Spyrus MC-DISK2, which I > purchased from scsiforsamplers.com in 2008 before they ran out. As > noted, I successfully formatted two 1GB SanDisk CF cards with this > unit (set to SCSI device #3). I've also used this device successfully > with my Emulator III (set to device #5). > > Also, what type of Emax II do you have, and are you running the latest > OS (2.14)? My Emax II was running 2.14 when I formatted the cards. > > > On Feb 6, 2010, at 6:09 PM, drifter7508 wrote: > >> I have tried a bunch of different CF cards. >> Most recently Sandisk 512 Mb oldschool >> Dos fat 16 preform. cards. No luck. >> The Emax wont even find the >> units in the scsi connection. So I cant >> format anything. :-( >> >> --- In emax@yahoogroups.com, "Brandt R. Gassman" <brandt@...> wrote: >> > >> > What brand of CF cards are you using? How long are you allowing for >> > the cards to format? I just successfully formatted two 1GB CF cards >> > on an Emax II Turbo rack, but each card took about three hours to >> > complete the "Verifying" process. >> > >> > >> > On Feb 6, 2010, at 5:16 PM, drifter7508 wrote: >> > >> > > Isnt that exactly what I recently bought and >> > > failed with? Not the same brand "Acard" >> > > but exactly the same spec. >> > > >> > > I got 2 scsi cases allready. :) >> > > >> > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: >> > > > >> > > > you are going to find it hard now most kits have been sold buy a >> > > acard 7720u scsi to ide adapter by an external scsi cdrom case >> get a >> > > ide to cf adapter try and get a atapi compliant so that it is hot >> > > swappable >> > > > >> > > > and a 5.25"plate to 3.5" plate reducer for the 3.5" floppy size >> > > ide to cf card drive this set up is going to cost you a bit so >> shop >> > > around on ebay for the scsi xternal cdrom case discard the cdrom >> and >> > > the scsi to ide interface >> > > > ----- Original Message ----- >> > > > From: drifter7508 >> > > > To: emax@yahoogroups.com >> > > > Sent: Saturday, February 06, 2010 9:20 PM >> > > > Subject: [emax] Point me to the places where to buy the right CF >> > > kit. >> > > > >> > > > >> > > > >> > > > So, Im fed up with all failures now. >> > > > >> > > > Can somebody please point me to a CF kit that actually 100% >> > > > works with EMAX II. >> > > > >> > > > I would not like to buy a slim floppy and such, I'd rather >> have a >> > > > the CF kit installed in an external scsi case. >> > > > >> > > > Thx. >> > > > >> > > > >> > > > >> > > > >> > > > >> > > > >> > > > ---------------------------------------------------------- >> > > > >> > > > >> > > > >> > > > No virus found in this incoming message. >> > > > Checked by AVG - www.avg.com >> > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: >> > > 02/06/10 07:35:00 >> > > > >> > > > >> > > > [Non-text portions of this message have been removed] >> > > > >> > > >> > > >> > > >> > >> > >> > >> > [Non-text portions of this message have been removed] >> > >> >> >> > > > > [Non-text portions of this message have been removed] > > > > ------------------------------------ > > Emax and Emax II User's Group Website > > http://www.silveriafamily.comYahoo! Groups Links > > > -------------------------------------------------------------------------------- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: 02/06/10 07:35:00
2010-02-07 by drifter7508
SCSI TO IDE BRIDGE: http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=330387956791&ssPageName=STRK:MEWNX:IT My settings at the moment: http://img59.imageshack.us/img59/9342/img0376x.jpg Jumper settings manual (I think): http://eab.abime.net/attachment.php?...8&d=1228279010 -------------------------------------- CF IDE READER CARD: http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=180328325603&ssPageName=STRK:MEWAX:IT My settings at the moment: http://img62.imageshack.us/img62/1481/img0380p.jpg ---------------------------------- Settings for my Panasonic SCSI CD (that would not work either) http://img59.imageshack.us/img59/762/img0374v.jpg --- In emax@yahoogroups.com, "jammie" <jammie.emma@...> wrote:
> > what make and models did you buy first > > what jumper settings are you using as this makes a big difference > > what ide to cf card adapter are you using as some only support pio mode > > and the scsi to ide needs to be set to this mode to work > > the cf card that you got is fine they work > > can you post pictures of set up as i can tell you what jumpers and settings > to get it to work so can ted > ----- Original Message ----- > From: "Brandt R. Gassman" <brandt@...> > To: <emax@yahoogroups.com> > Sent: Saturday, February 06, 2010 11:41 PM > Subject: Re: [emax] Re: Point me to the places where to buy the right CF > kit. > > > > Ah, OK. I understand the situation now. Sorry if you've shared this > > information with the group already, but what external SCSI devices > > have you tried? > > > > The external SCSI > IDE > CF I'm using is the Spyrus MC-DISK2, which I > > purchased from scsiforsamplers.com in 2008 before they ran out. As > > noted, I successfully formatted two 1GB SanDisk CF cards with this > > unit (set to SCSI device #3). I've also used this device successfully > > with my Emulator III (set to device #5). > > > > Also, what type of Emax II do you have, and are you running the latest > > OS (2.14)? My Emax II was running 2.14 when I formatted the cards. > > > > > > On Feb 6, 2010, at 6:09 PM, drifter7508 wrote: > > > >> I have tried a bunch of different CF cards. > >> Most recently Sandisk 512 Mb oldschool > >> Dos fat 16 preform. cards. No luck. > >> The Emax wont even find the > >> units in the scsi connection. So I cant > >> format anything. :-( > >> > >> --- In emax@yahoogroups.com, "Brandt R. Gassman" <brandt@> wrote: > >> > > >> > What brand of CF cards are you using? How long are you allowing for > >> > the cards to format? I just successfully formatted two 1GB CF cards > >> > on an Emax II Turbo rack, but each card took about three hours to > >> > complete the "Verifying" process. > >> > > >> > > >> > On Feb 6, 2010, at 5:16 PM, drifter7508 wrote: > >> > > >> > > Isnt that exactly what I recently bought and > >> > > failed with? Not the same brand "Acard" > >> > > but exactly the same spec. > >> > > > >> > > I got 2 scsi cases allready. :) > >> > > > >> > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > >> > > > > >> > > > you are going to find it hard now most kits have been sold buy a > >> > > acard 7720u scsi to ide adapter by an external scsi cdrom case > >> get a > >> > > ide to cf adapter try and get a atapi compliant so that it is hot > >> > > swappable > >> > > > > >> > > > and a 5.25"plate to 3.5" plate reducer for the 3.5" floppy size > >> > > ide to cf card drive this set up is going to cost you a bit so > >> shop > >> > > around on ebay for the scsi xternal cdrom case discard the cdrom > >> and > >> > > the scsi to ide interface > >> > > > ----- Original Message ----- > >> > > > From: drifter7508 > >> > > > To: emax@yahoogroups.com > >> > > > Sent: Saturday, February 06, 2010 9:20 PM > >> > > > Subject: [emax] Point me to the places where to buy the right CF > >> > > kit. > >> > > > > >> > > > > >> > > > > >> > > > So, Im fed up with all failures now. > >> > > > > >> > > > Can somebody please point me to a CF kit that actually 100% > >> > > > works with EMAX II. > >> > > > > >> > > > I would not like to buy a slim floppy and such, I'd rather > >> have a > >> > > > the CF kit installed in an external scsi case. > >> > > > > >> > > > Thx. > >> > > > > >> > > > > >> > > > > >> > > > > >> > > > > >> > > > > >> > > > ---------------------------------------------------------- > >> > > > > >> > > > > >> > > > > >> > > > No virus found in this incoming message. > >> > > > Checked by AVG - www.avg.com > >> > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: > >> > > 02/06/10 07:35:00 > >> > > > > >> > > > > >> > > > [Non-text portions of this message have been removed] > >> > > > > >> > > > >> > > > >> > > > >> > > >> > > >> > > >> > [Non-text portions of this message have been removed] > >> > > >> > >> > >> > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > ------------------------------------ > > > > Emax and Emax II User's Group Website > > > > http://www.silveriafamily.comYahoo! Groups Links > > > > > > > > > -------------------------------------------------------------------------------- > > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: 02/06/10 > 07:35:00 >
2010-02-07 by drifter7508
Whoops! Here's the correct URL for the User manual of the IDE-SCSI BRIDGE: http://eab.abime.net/attachment.php?attachmentid=19128&d=1228279010 --- In emax@yahoogroups.com, "drifter7508" <drifter7508@...> wrote:
> > > > > SCSI TO IDE BRIDGE: > http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=330387956791&ssPageName=STRK:MEWNX:IT > > My settings at the moment: > http://img59.imageshack.us/img59/9342/img0376x.jpg > > Jumper settings manual (I think): > http://eab.abime.net/attachment.php?...8&d=1228279010 > > -------------------------------------- > > CF IDE READER CARD: > http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=180328325603&ssPageName=STRK:MEWAX:IT > > My settings at the moment: > http://img62.imageshack.us/img62/1481/img0380p.jpg > > ---------------------------------- > > > Settings for my Panasonic SCSI CD (that would not work either) > http://img59.imageshack.us/img59/762/img0374v.jpg > > > > > > > > > > > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > what make and models did you buy first > > > > what jumper settings are you using as this makes a big difference > > > > what ide to cf card adapter are you using as some only support pio mode > > > > and the scsi to ide needs to be set to this mode to work > > > > the cf card that you got is fine they work > > > > can you post pictures of set up as i can tell you what jumpers and settings > > to get it to work so can ted > > ----- Original Message ----- > > From: "Brandt R. Gassman" <brandt@> > > To: <emax@yahoogroups.com> > > Sent: Saturday, February 06, 2010 11:41 PM > > Subject: Re: [emax] Re: Point me to the places where to buy the right CF > > kit. > > > > > > > Ah, OK. I understand the situation now. Sorry if you've shared this > > > information with the group already, but what external SCSI devices > > > have you tried? > > > > > > The external SCSI > IDE > CF I'm using is the Spyrus MC-DISK2, which I > > > purchased from scsiforsamplers.com in 2008 before they ran out. As > > > noted, I successfully formatted two 1GB SanDisk CF cards with this > > > unit (set to SCSI device #3). I've also used this device successfully > > > with my Emulator III (set to device #5). > > > > > > Also, what type of Emax II do you have, and are you running the latest > > > OS (2.14)? My Emax II was running 2.14 when I formatted the cards. > > > > > > > > > On Feb 6, 2010, at 6:09 PM, drifter7508 wrote: > > > > > >> I have tried a bunch of different CF cards. > > >> Most recently Sandisk 512 Mb oldschool > > >> Dos fat 16 preform. cards. No luck. > > >> The Emax wont even find the > > >> units in the scsi connection. So I cant > > >> format anything. :-( > > >> > > >> --- In emax@yahoogroups.com, "Brandt R. Gassman" <brandt@> wrote: > > >> > > > >> > What brand of CF cards are you using? How long are you allowing for > > >> > the cards to format? I just successfully formatted two 1GB CF cards > > >> > on an Emax II Turbo rack, but each card took about three hours to > > >> > complete the "Verifying" process. > > >> > > > >> > > > >> > On Feb 6, 2010, at 5:16 PM, drifter7508 wrote: > > >> > > > >> > > Isnt that exactly what I recently bought and > > >> > > failed with? Not the same brand "Acard" > > >> > > but exactly the same spec. > > >> > > > > >> > > I got 2 scsi cases allready. :) > > >> > > > > >> > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > >> > > > > > >> > > > you are going to find it hard now most kits have been sold buy a > > >> > > acard 7720u scsi to ide adapter by an external scsi cdrom case > > >> get a > > >> > > ide to cf adapter try and get a atapi compliant so that it is hot > > >> > > swappable > > >> > > > > > >> > > > and a 5.25"plate to 3.5" plate reducer for the 3.5" floppy size > > >> > > ide to cf card drive this set up is going to cost you a bit so > > >> shop > > >> > > around on ebay for the scsi xternal cdrom case discard the cdrom > > >> and > > >> > > the scsi to ide interface > > >> > > > ----- Original Message ----- > > >> > > > From: drifter7508 > > >> > > > To: emax@yahoogroups.com > > >> > > > Sent: Saturday, February 06, 2010 9:20 PM > > >> > > > Subject: [emax] Point me to the places where to buy the right CF > > >> > > kit. > > >> > > > > > >> > > > > > >> > > > > > >> > > > So, Im fed up with all failures now. > > >> > > > > > >> > > > Can somebody please point me to a CF kit that actually 100% > > >> > > > works with EMAX II. > > >> > > > > > >> > > > I would not like to buy a slim floppy and such, I'd rather > > >> have a > > >> > > > the CF kit installed in an external scsi case. > > >> > > > > > >> > > > Thx. > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > ---------------------------------------------------------- > > >> > > > > > >> > > > > > >> > > > > > >> > > > No virus found in this incoming message. > > >> > > > Checked by AVG - www.avg.com > > >> > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: > > >> > > 02/06/10 07:35:00 > > >> > > > > > >> > > > > > >> > > > [Non-text portions of this message have been removed] > > >> > > > > > >> > > > > >> > > > > >> > > > > >> > > > >> > > > >> > > > >> > [Non-text portions of this message have been removed] > > >> > > > >> > > >> > > >> > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > ------------------------------------ > > > > > > Emax and Emax II User's Group Website > > > > > > http://www.silveriafamily.comYahoo! Groups Links > > > > > > > > > > > > > > > -------------------------------------------------------------------------------- > > > > > > > > No virus found in this incoming message. > > Checked by AVG - www.avg.com > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: 02/06/10 > > 07:35:00 > > >
2010-02-07 by jammie
i dont know if that card works as its the updated version i could not get it to work with the ensoniqs but the older version which is the pdf that you got did work with the ensoniqs and emax that model does work on yamaha a3000 kurzweil k2000/k2500 akais and rolands the settings i use for the idsc 21-e are no jumpers on the fist 4 sets of pins 0-3 as this is id 0 which the emaxes can boot from pin 4 and pin 5 need jumpers on this is for scsi 1 operation which is what the emaxes work at pin 7 depending on what your ide to cf card supports pio mode is good enough for the emax as it only goes upto 600mb format size any way dma is for cards bigger than 1gb check the cf card adapter to see what its set to if its a good quality 1 then you will have jumpers to set to dma /pio mode also the ide to cf adapter has to be set to master cant use slave as the scsi to ide wont read it no jumper on pin 9 as this puts it into flash rom mode and the device will not operate can you post a picture of the cf card adapter
----- Original Message -----
From: drifter7508
To: emax@yahoogroups.com
Sent: Sunday, February 07, 2010 1:28 PM
Subject: [emax] Re: Point me to the places where to buy the right CF kit.
SCSI TO IDE BRIDGE:
http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=330387956791&ssPageName=STRK:MEWNX:IT
My settings at the moment:
http://img59.imageshack.us/img59/9342/img0376x.jpg
Jumper settings manual (I think):
http://eab.abime.net/attachment.php?...8&d=1228279010
--------------------------------------
CF IDE READER CARD:
http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=180328325603&ssPageName=STRK:MEWAX:IT
My settings at the moment:
http://img62.imageshack.us/img62/1481/img0380p.jpg
----------------------------------
Settings for my Panasonic SCSI CD (that would not work either)
http://img59.imageshack.us/img59/762/img0374v.jpg
--- In emax@yahoogroups.com, "jammie" <jammie.emma@...> wrote:
>
> what make and models did you buy first
>
> what jumper settings are you using as this makes a big difference
>
> what ide to cf card adapter are you using as some only support pio mode
>
> and the scsi to ide needs to be set to this mode to work
>
> the cf card that you got is fine they work
>
> can you post pictures of set up as i can tell you what jumpers and settings
> to get it to work so can ted
> ----- Original Message -----
> From: "Brandt R. Gassman" <brandt@...>
> To: <emax@yahoogroups.com>
> Sent: Saturday, February 06, 2010 11:41 PM
> Subject: Re: [emax] Re: Point me to the places where to buy the right CF
> kit.
>
>
> > Ah, OK. I understand the situation now. Sorry if you've shared this
> > information with the group already, but what external SCSI devices
> > have you tried?
> >
> > The external SCSI > IDE > CF I'm using is the Spyrus MC-DISK2, which I
> > purchased from scsiforsamplers.com in 2008 before they ran out. As
> > noted, I successfully formatted two 1GB SanDisk CF cards with this
> > unit (set to SCSI device #3). I've also used this device successfully
> > with my Emulator III (set to device #5).
> >
> > Also, what type of Emax II do you have, and are you running the latest
> > OS (2.14)? My Emax II was running 2.14 when I formatted the cards.
> >
> >
> > On Feb 6, 2010, at 6:09 PM, drifter7508 wrote:
> >
> >> I have tried a bunch of different CF cards.
> >> Most recently Sandisk 512 Mb oldschool
> >> Dos fat 16 preform. cards. No luck.
> >> The Emax wont even find the
> >> units in the scsi connection. So I cant
> >> format anything. :-(
> >>
> >> --- In emax@yahoogroups.com, "Brandt R. Gassman" <brandt@> wrote:
> >> >
> >> > What brand of CF cards are you using? How long are you allowing for
> >> > the cards to format? I just successfully formatted two 1GB CF cards
> >> > on an Emax II Turbo rack, but each card took about three hours to
> >> > complete the "Verifying" process.
> >> >
> >> >
> >> > On Feb 6, 2010, at 5:16 PM, drifter7508 wrote:
> >> >
> >> > > Isnt that exactly what I recently bought and
> >> > > failed with? Not the same brand "Acard"
> >> > > but exactly the same spec.
> >> > >
> >> > > I got 2 scsi cases allready. :)
> >> > >
> >> > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> >> > > >
> >> > > > you are going to find it hard now most kits have been sold buy a
> >> > > acard 7720u scsi to ide adapter by an external scsi cdrom case
> >> get a
> >> > > ide to cf adapter try and get a atapi compliant so that it is hot
> >> > > swappable
> >> > > >
> >> > > > and a 5.25"plate to 3.5" plate reducer for the 3.5" floppy size
> >> > > ide to cf card drive this set up is going to cost you a bit so
> >> shop
> >> > > around on ebay for the scsi xternal cdrom case discard the cdrom
> >> and
> >> > > the scsi to ide interface
> >> > > > ----- Original Message -----
> >> > > > From: drifter7508
> >> > > > To: emax@yahoogroups.com
> >> > > > Sent: Saturday, February 06, 2010 9:20 PM
> >> > > > Subject: [emax] Point me to the places where to buy the right CF
> >> > > kit.
> >> > > >
> >> > > >
> >> > > >
> >> > > > So, Im fed up with all failures now.
> >> > > >
> >> > > > Can somebody please point me to a CF kit that actually 100%
> >> > > > works with EMAX II.
> >> > > >
> >> > > > I would not like to buy a slim floppy and such, I'd rather
> >> have a
> >> > > > the CF kit installed in an external scsi case.
> >> > > >
> >> > > > Thx.
> >> > > >
> >> > > >
> >> > > >
> >> > > >
> >> > > >
> >> > > >
> >> > > > ----------------------------------------------------------
> >> > > >
> >> > > >
> >> > > >
> >> > > > No virus found in this incoming message.
> >> > > > Checked by AVG - www.avg.com
> >> > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date:
> >> > > 02/06/10 07:35:00
> >> > > >
> >> > > >
> >> > > > [Non-text portions of this message have been removed]
> >> > > >
> >> > >
> >> > >
> >> > >
> >> >
> >> >
> >> >
> >> > [Non-text portions of this message have been removed]
> >> >
> >>
> >>
> >>
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > ------------------------------------
> >
> > Emax and Emax II User's Group Website
> >
> > http://www.silveriafamily.comYahoo! Groups Links
> >
> >
> >
>
>
> ----------------------------------------------------------
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: 02/06/10
> 07:35:00
>
------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.435 / Virus Database: 271.1.1/2672 - Release Date: 02/06/10 19:35:00
[Non-text portions of this message have been removed]2010-02-07 by jammie
sorry pin 8 is the rom flash pin 9 is the termination this needs to be off for the self termination
----- Original Message -----
From: drifter7508
To: emax@yahoogroups.com
Sent: Sunday, February 07, 2010 1:28 PM
Subject: [emax] Re: Point me to the places where to buy the right CF kit.
SCSI TO IDE BRIDGE:
http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=330387956791&ssPageName=STRK:MEWNX:IT
My settings at the moment:
http://img59.imageshack.us/img59/9342/img0376x.jpg
Jumper settings manual (I think):
http://eab.abime.net/attachment.php?...8&d=1228279010
--------------------------------------
CF IDE READER CARD:
http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=180328325603&ssPageName=STRK:MEWAX:IT
My settings at the moment:
http://img62.imageshack.us/img62/1481/img0380p.jpg
----------------------------------
Settings for my Panasonic SCSI CD (that would not work either)
http://img59.imageshack.us/img59/762/img0374v.jpg
--- In emax@yahoogroups.com, "jammie" <jammie.emma@...> wrote:
>
> what make and models did you buy first
>
> what jumper settings are you using as this makes a big difference
>
> what ide to cf card adapter are you using as some only support pio mode
>
> and the scsi to ide needs to be set to this mode to work
>
> the cf card that you got is fine they work
>
> can you post pictures of set up as i can tell you what jumpers and settings
> to get it to work so can ted
> ----- Original Message -----
> From: "Brandt R. Gassman" <brandt@...>
> To: <emax@yahoogroups.com>
> Sent: Saturday, February 06, 2010 11:41 PM
> Subject: Re: [emax] Re: Point me to the places where to buy the right CF
> kit.
>
>
> > Ah, OK. I understand the situation now. Sorry if you've shared this
> > information with the group already, but what external SCSI devices
> > have you tried?
> >
> > The external SCSI > IDE > CF I'm using is the Spyrus MC-DISK2, which I
> > purchased from scsiforsamplers.com in 2008 before they ran out. As
> > noted, I successfully formatted two 1GB SanDisk CF cards with this
> > unit (set to SCSI device #3). I've also used this device successfully
> > with my Emulator III (set to device #5).
> >
> > Also, what type of Emax II do you have, and are you running the latest
> > OS (2.14)? My Emax II was running 2.14 when I formatted the cards.
> >
> >
> > On Feb 6, 2010, at 6:09 PM, drifter7508 wrote:
> >
> >> I have tried a bunch of different CF cards.
> >> Most recently Sandisk 512 Mb oldschool
> >> Dos fat 16 preform. cards. No luck.
> >> The Emax wont even find the
> >> units in the scsi connection. So I cant
> >> format anything. :-(
> >>
> >> --- In emax@yahoogroups.com, "Brandt R. Gassman" <brandt@> wrote:
> >> >
> >> > What brand of CF cards are you using? How long are you allowing for
> >> > the cards to format? I just successfully formatted two 1GB CF cards
> >> > on an Emax II Turbo rack, but each card took about three hours to
> >> > complete the "Verifying" process.
> >> >
> >> >
> >> > On Feb 6, 2010, at 5:16 PM, drifter7508 wrote:
> >> >
> >> > > Isnt that exactly what I recently bought and
> >> > > failed with? Not the same brand "Acard"
> >> > > but exactly the same spec.
> >> > >
> >> > > I got 2 scsi cases allready. :)
> >> > >
> >> > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> >> > > >
> >> > > > you are going to find it hard now most kits have been sold buy a
> >> > > acard 7720u scsi to ide adapter by an external scsi cdrom case
> >> get a
> >> > > ide to cf adapter try and get a atapi compliant so that it is hot
> >> > > swappable
> >> > > >
> >> > > > and a 5.25"plate to 3.5" plate reducer for the 3.5" floppy size
> >> > > ide to cf card drive this set up is going to cost you a bit so
> >> shop
> >> > > around on ebay for the scsi xternal cdrom case discard the cdrom
> >> and
> >> > > the scsi to ide interface
> >> > > > ----- Original Message -----
> >> > > > From: drifter7508
> >> > > > To: emax@yahoogroups.com
> >> > > > Sent: Saturday, February 06, 2010 9:20 PM
> >> > > > Subject: [emax] Point me to the places where to buy the right CF
> >> > > kit.
> >> > > >
> >> > > >
> >> > > >
> >> > > > So, Im fed up with all failures now.
> >> > > >
> >> > > > Can somebody please point me to a CF kit that actually 100%
> >> > > > works with EMAX II.
> >> > > >
> >> > > > I would not like to buy a slim floppy and such, I'd rather
> >> have a
> >> > > > the CF kit installed in an external scsi case.
> >> > > >
> >> > > > Thx.
> >> > > >
> >> > > >
> >> > > >
> >> > > >
> >> > > >
> >> > > >
> >> > > > ----------------------------------------------------------
> >> > > >
> >> > > >
> >> > > >
> >> > > > No virus found in this incoming message.
> >> > > > Checked by AVG - www.avg.com
> >> > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date:
> >> > > 02/06/10 07:35:00
> >> > > >
> >> > > >
> >> > > > [Non-text portions of this message have been removed]
> >> > > >
> >> > >
> >> > >
> >> > >
> >> >
> >> >
> >> >
> >> > [Non-text portions of this message have been removed]
> >> >
> >>
> >>
> >>
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > ------------------------------------
> >
> > Emax and Emax II User's Group Website
> >
> > http://www.silveriafamily.comYahoo! Groups Links
> >
> >
> >
>
>
> ----------------------------------------------------------
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: 02/06/10
> 07:35:00
>
------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.435 / Virus Database: 271.1.1/2672 - Release Date: 02/06/10 19:35:00
[Non-text portions of this message have been removed]2010-02-07 by drifter7508
There is an image of the IDE CF card reader in my earlier post. (With all the other links an images) http://img62.imageshack.us/img62/1481/img0380p.jpg Just tried the settings you recom., sadly... no luck at all =( --- In emax@yahoogroups.com, "jammie" <jammie.emma@...> wrote:
> > sorry pin 8 is the rom flash pin 9 is the termination this needs to be off for the self termination > ----- Original Message ----- > From: drifter7508 > To: emax@yahoogroups.com > Sent: Sunday, February 07, 2010 1:28 PM > Subject: [emax] Re: Point me to the places where to buy the right CF kit. > > > > > > SCSI TO IDE BRIDGE: > http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=330387956791&ssPageName=STRK:MEWNX:IT > > My settings at the moment: > http://img59.imageshack.us/img59/9342/img0376x.jpg > > Jumper settings manual (I think): > http://eab.abime.net/attachment.php?...8&d=1228279010 > > -------------------------------------- > > CF IDE READER CARD: > http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=180328325603&ssPageName=STRK:MEWAX:IT > > My settings at the moment: > http://img62.imageshack.us/img62/1481/img0380p.jpg > > ---------------------------------- > > Settings for my Panasonic SCSI CD (that would not work either) > http://img59.imageshack.us/img59/762/img0374v.jpg > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > what make and models did you buy first > > > > what jumper settings are you using as this makes a big difference > > > > what ide to cf card adapter are you using as some only support pio mode > > > > and the scsi to ide needs to be set to this mode to work > > > > the cf card that you got is fine they work > > > > can you post pictures of set up as i can tell you what jumpers and settings > > to get it to work so can ted > > ----- Original Message ----- > > From: "Brandt R. Gassman" <brandt@> > > To: <emax@yahoogroups.com> > > Sent: Saturday, February 06, 2010 11:41 PM > > Subject: Re: [emax] Re: Point me to the places where to buy the right CF > > kit. > > > > > > > Ah, OK. I understand the situation now. Sorry if you've shared this > > > information with the group already, but what external SCSI devices > > > have you tried? > > > > > > The external SCSI > IDE > CF I'm using is the Spyrus MC-DISK2, which I > > > purchased from scsiforsamplers.com in 2008 before they ran out. As > > > noted, I successfully formatted two 1GB SanDisk CF cards with this > > > unit (set to SCSI device #3). I've also used this device successfully > > > with my Emulator III (set to device #5). > > > > > > Also, what type of Emax II do you have, and are you running the latest > > > OS (2.14)? My Emax II was running 2.14 when I formatted the cards. > > > > > > > > > On Feb 6, 2010, at 6:09 PM, drifter7508 wrote: > > > > > >> I have tried a bunch of different CF cards. > > >> Most recently Sandisk 512 Mb oldschool > > >> Dos fat 16 preform. cards. No luck. > > >> The Emax wont even find the > > >> units in the scsi connection. So I cant > > >> format anything. :-( > > >> > > >> --- In emax@yahoogroups.com, "Brandt R. Gassman" <brandt@> wrote: > > >> > > > >> > What brand of CF cards are you using? How long are you allowing for > > >> > the cards to format? I just successfully formatted two 1GB CF cards > > >> > on an Emax II Turbo rack, but each card took about three hours to > > >> > complete the "Verifying" process. > > >> > > > >> > > > >> > On Feb 6, 2010, at 5:16 PM, drifter7508 wrote: > > >> > > > >> > > Isnt that exactly what I recently bought and > > >> > > failed with? Not the same brand "Acard" > > >> > > but exactly the same spec. > > >> > > > > >> > > I got 2 scsi cases allready. :) > > >> > > > > >> > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > >> > > > > > >> > > > you are going to find it hard now most kits have been sold buy a > > >> > > acard 7720u scsi to ide adapter by an external scsi cdrom case > > >> get a > > >> > > ide to cf adapter try and get a atapi compliant so that it is hot > > >> > > swappable > > >> > > > > > >> > > > and a 5.25"plate to 3.5" plate reducer for the 3.5" floppy size > > >> > > ide to cf card drive this set up is going to cost you a bit so > > >> shop > > >> > > around on ebay for the scsi xternal cdrom case discard the cdrom > > >> and > > >> > > the scsi to ide interface > > >> > > > ----- Original Message ----- > > >> > > > From: drifter7508 > > >> > > > To: emax@yahoogroups.com > > >> > > > Sent: Saturday, February 06, 2010 9:20 PM > > >> > > > Subject: [emax] Point me to the places where to buy the right CF > > >> > > kit. > > >> > > > > > >> > > > > > >> > > > > > >> > > > So, Im fed up with all failures now. > > >> > > > > > >> > > > Can somebody please point me to a CF kit that actually 100% > > >> > > > works with EMAX II. > > >> > > > > > >> > > > I would not like to buy a slim floppy and such, I'd rather > > >> have a > > >> > > > the CF kit installed in an external scsi case. > > >> > > > > > >> > > > Thx. > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > ---------------------------------------------------------- > > >> > > > > > >> > > > > > >> > > > > > >> > > > No virus found in this incoming message. > > >> > > > Checked by AVG - www.avg.com > > >> > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: > > >> > > 02/06/10 07:35:00 > > >> > > > > > >> > > > > > >> > > > [Non-text portions of this message have been removed] > > >> > > > > > >> > > > > >> > > > > >> > > > > >> > > > >> > > > >> > > > >> > [Non-text portions of this message have been removed] > > >> > > > >> > > >> > > >> > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > ------------------------------------ > > > > > > Emax and Emax II User's Group Website > > > > > > http://www.silveriafamily.comYahoo! Groups Links > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > No virus found in this incoming message. > > Checked by AVG - www.avg.com > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: 02/06/10 > > 07:35:00 > > > > > > > > > ------------------------------------------------------------------------------ > > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.435 / Virus Database: 271.1.1/2672 - Release Date: 02/06/10 19:35:00 > > > [Non-text portions of this message have been removed] >
2010-02-07 by jammie
make sure its set to master pins 1 and 2 shorted now your cf card supports dma only so you need to jumper pin 7 this is for dma mode
----- Original Message -----
From: drifter7508
To: emax@yahoogroups.com
Sent: Sunday, February 07, 2010 3:53 PM
Subject: [emax] Re: Point me to the places where to buy the right CF kit.
There is an image of the IDE CF card reader in my earlier post.
(With all the other links an images)
http://img62.imageshack.us/img62/1481/img0380p.jpg
Just tried the settings you recom., sadly... no luck at all =(
--- In emax@yahoogroups.com, "jammie" <jammie.emma@...> wrote:
>
> sorry pin 8 is the rom flash pin 9 is the termination this needs to be off for the self termination
> ----- Original Message -----
> From: drifter7508
> To: emax@yahoogroups.com
> Sent: Sunday, February 07, 2010 1:28 PM
> Subject: [emax] Re: Point me to the places where to buy the right CF kit.
>
>
>
>
>
> SCSI TO IDE BRIDGE:
> http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=330387956791&ssPageName=STRK:MEWNX:IT
>
> My settings at the moment:
> http://img59.imageshack.us/img59/9342/img0376x.jpg
>
> Jumper settings manual (I think):
> http://eab.abime.net/attachment.php?...8&d=1228279010
>
> --------------------------------------
>
> CF IDE READER CARD:
> http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=180328325603&ssPageName=STRK:MEWAX:IT
>
> My settings at the moment:
> http://img62.imageshack.us/img62/1481/img0380p.jpg
>
> ----------------------------------
>
> Settings for my Panasonic SCSI CD (that would not work either)
> http://img59.imageshack.us/img59/762/img0374v.jpg
>
> --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> >
> > what make and models did you buy first
> >
> > what jumper settings are you using as this makes a big difference
> >
> > what ide to cf card adapter are you using as some only support pio mode
> >
> > and the scsi to ide needs to be set to this mode to work
> >
> > the cf card that you got is fine they work
> >
> > can you post pictures of set up as i can tell you what jumpers and settings
> > to get it to work so can ted
> > ----- Original Message -----
> > From: "Brandt R. Gassman" <brandt@>
> > To: <emax@yahoogroups.com>
> > Sent: Saturday, February 06, 2010 11:41 PM
> > Subject: Re: [emax] Re: Point me to the places where to buy the right CF
> > kit.
> >
> >
> > > Ah, OK. I understand the situation now. Sorry if you've shared this
> > > information with the group already, but what external SCSI devices
> > > have you tried?
> > >
> > > The external SCSI > IDE > CF I'm using is the Spyrus MC-DISK2, which I
> > > purchased from scsiforsamplers.com in 2008 before they ran out. As
> > > noted, I successfully formatted two 1GB SanDisk CF cards with this
> > > unit (set to SCSI device #3). I've also used this device successfully
> > > with my Emulator III (set to device #5).
> > >
> > > Also, what type of Emax II do you have, and are you running the latest
> > > OS (2.14)? My Emax II was running 2.14 when I formatted the cards.
> > >
> > >
> > > On Feb 6, 2010, at 6:09 PM, drifter7508 wrote:
> > >
> > >> I have tried a bunch of different CF cards.
> > >> Most recently Sandisk 512 Mb oldschool
> > >> Dos fat 16 preform. cards. No luck.
> > >> The Emax wont even find the
> > >> units in the scsi connection. So I cant
> > >> format anything. :-(
> > >>
> > >> --- In emax@yahoogroups.com, "Brandt R. Gassman" <brandt@> wrote:
> > >> >
> > >> > What brand of CF cards are you using? How long are you allowing for
> > >> > the cards to format? I just successfully formatted two 1GB CF cards
> > >> > on an Emax II Turbo rack, but each card took about three hours to
> > >> > complete the "Verifying" process.
> > >> >
> > >> >
> > >> > On Feb 6, 2010, at 5:16 PM, drifter7508 wrote:
> > >> >
> > >> > > Isnt that exactly what I recently bought and
> > >> > > failed with? Not the same brand "Acard"
> > >> > > but exactly the same spec.
> > >> > >
> > >> > > I got 2 scsi cases allready. :)
> > >> > >
> > >> > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> > >> > > >
> > >> > > > you are going to find it hard now most kits have been sold buy a
> > >> > > acard 7720u scsi to ide adapter by an external scsi cdrom case
> > >> get a
> > >> > > ide to cf adapter try and get a atapi compliant so that it is hot
> > >> > > swappable
> > >> > > >
> > >> > > > and a 5.25"plate to 3.5" plate reducer for the 3.5" floppy size
> > >> > > ide to cf card drive this set up is going to cost you a bit so
> > >> shop
> > >> > > around on ebay for the scsi xternal cdrom case discard the cdrom
> > >> and
> > >> > > the scsi to ide interface
> > >> > > > ----- Original Message -----
> > >> > > > From: drifter7508
> > >> > > > To: emax@yahoogroups.com
> > >> > > > Sent: Saturday, February 06, 2010 9:20 PM
> > >> > > > Subject: [emax] Point me to the places where to buy the right CF
> > >> > > kit.
> > >> > > >
> > >> > > >
> > >> > > >
> > >> > > > So, Im fed up with all failures now.
> > >> > > >
> > >> > > > Can somebody please point me to a CF kit that actually 100%
> > >> > > > works with EMAX II.
> > >> > > >
> > >> > > > I would not like to buy a slim floppy and such, I'd rather
> > >> have a
> > >> > > > the CF kit installed in an external scsi case.
> > >> > > >
> > >> > > > Thx.
> > >> > > >
> > >> > > >
> > >> > > >
> > >> > > >
> > >> > > >
> > >> > > >
> > >> > > > ----------------------------------------------------------
> > >> > > >
> > >> > > >
> > >> > > >
> > >> > > > No virus found in this incoming message.
> > >> > > > Checked by AVG - www.avg.com
> > >> > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date:
> > >> > > 02/06/10 07:35:00
> > >> > > >
> > >> > > >
> > >> > > > [Non-text portions of this message have been removed]
> > >> > > >
> > >> > >
> > >> > >
> > >> > >
> > >> >
> > >> >
> > >> >
> > >> > [Non-text portions of this message have been removed]
> > >> >
> > >>
> > >>
> > >>
> > >
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> > >
> > >
> > > ------------------------------------
> > >
> > > Emax and Emax II User's Group Website
> > >
> > > http://www.silveriafamily.comYahoo! Groups Links
> > >
> > >
> > >
> >
> >
> > ----------------------------------------------------------
> >
> >
> >
> > No virus found in this incoming message.
> > Checked by AVG - www.avg.com
> > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: 02/06/10
> > 07:35:00
> >
>
>
>
>
>
>
> ----------------------------------------------------------
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.435 / Virus Database: 271.1.1/2672 - Release Date: 02/06/10 19:35:00
>
>
> [Non-text portions of this message have been removed]
>
------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.435 / Virus Database: 271.1.1/2672 - Release Date: 02/06/10 19:35:00
[Non-text portions of this message have been removed]2010-02-07 by jammie
http://store.compuapps.com/idecf-reader.html i think the cf adapter is your problem heres a link to good one that works and they do them in black and white and they come in a 3.5" floppy housing also what is your emax id channel set to but like i said the idsc21-e is the card that works with mine the 1 you have is the updated 1 and does not have the term options like the idsc21-e the acard a7720u works with the os that ted has
----- Original Message -----
From: drifter7508
To: emax@yahoogroups.com
Sent: Sunday, February 07, 2010 3:53 PM
Subject: [emax] Re: Point me to the places where to buy the right CF kit.
There is an image of the IDE CF card reader in my earlier post.
(With all the other links an images)
http://img62.imageshack.us/img62/1481/img0380p.jpg
Just tried the settings you recom., sadly... no luck at all =(
--- In emax@yahoogroups.com, "jammie" <jammie.emma@...> wrote:
>
> sorry pin 8 is the rom flash pin 9 is the termination this needs to be off for the self termination
> ----- Original Message -----
> From: drifter7508
> To: emax@yahoogroups.com
> Sent: Sunday, February 07, 2010 1:28 PM
> Subject: [emax] Re: Point me to the places where to buy the right CF kit.
>
>
>
>
>
> SCSI TO IDE BRIDGE:
> http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=330387956791&ssPageName=STRK:MEWNX:IT
>
> My settings at the moment:
> http://img59.imageshack.us/img59/9342/img0376x.jpg
>
> Jumper settings manual (I think):
> http://eab.abime.net/attachment.php?...8&d=1228279010
>
> --------------------------------------
>
> CF IDE READER CARD:
> http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=180328325603&ssPageName=STRK:MEWAX:IT
>
> My settings at the moment:
> http://img62.imageshack.us/img62/1481/img0380p.jpg
>
> ----------------------------------
>
> Settings for my Panasonic SCSI CD (that would not work either)
> http://img59.imageshack.us/img59/762/img0374v.jpg
>
> --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> >
> > what make and models did you buy first
> >
> > what jumper settings are you using as this makes a big difference
> >
> > what ide to cf card adapter are you using as some only support pio mode
> >
> > and the scsi to ide needs to be set to this mode to work
> >
> > the cf card that you got is fine they work
> >
> > can you post pictures of set up as i can tell you what jumpers and settings
> > to get it to work so can ted
> > ----- Original Message -----
> > From: "Brandt R. Gassman" <brandt@>
> > To: <emax@yahoogroups.com>
> > Sent: Saturday, February 06, 2010 11:41 PM
> > Subject: Re: [emax] Re: Point me to the places where to buy the right CF
> > kit.
> >
> >
> > > Ah, OK. I understand the situation now. Sorry if you've shared this
> > > information with the group already, but what external SCSI devices
> > > have you tried?
> > >
> > > The external SCSI > IDE > CF I'm using is the Spyrus MC-DISK2, which I
> > > purchased from scsiforsamplers.com in 2008 before they ran out. As
> > > noted, I successfully formatted two 1GB SanDisk CF cards with this
> > > unit (set to SCSI device #3). I've also used this device successfully
> > > with my Emulator III (set to device #5).
> > >
> > > Also, what type of Emax II do you have, and are you running the latest
> > > OS (2.14)? My Emax II was running 2.14 when I formatted the cards.
> > >
> > >
> > > On Feb 6, 2010, at 6:09 PM, drifter7508 wrote:
> > >
> > >> I have tried a bunch of different CF cards.
> > >> Most recently Sandisk 512 Mb oldschool
> > >> Dos fat 16 preform. cards. No luck.
> > >> The Emax wont even find the
> > >> units in the scsi connection. So I cant
> > >> format anything. :-(
> > >>
> > >> --- In emax@yahoogroups.com, "Brandt R. Gassman" <brandt@> wrote:
> > >> >
> > >> > What brand of CF cards are you using? How long are you allowing for
> > >> > the cards to format? I just successfully formatted two 1GB CF cards
> > >> > on an Emax II Turbo rack, but each card took about three hours to
> > >> > complete the "Verifying" process.
> > >> >
> > >> >
> > >> > On Feb 6, 2010, at 5:16 PM, drifter7508 wrote:
> > >> >
> > >> > > Isnt that exactly what I recently bought and
> > >> > > failed with? Not the same brand "Acard"
> > >> > > but exactly the same spec.
> > >> > >
> > >> > > I got 2 scsi cases allready. :)
> > >> > >
> > >> > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> > >> > > >
> > >> > > > you are going to find it hard now most kits have been sold buy a
> > >> > > acard 7720u scsi to ide adapter by an external scsi cdrom case
> > >> get a
> > >> > > ide to cf adapter try and get a atapi compliant so that it is hot
> > >> > > swappable
> > >> > > >
> > >> > > > and a 5.25"plate to 3.5" plate reducer for the 3.5" floppy size
> > >> > > ide to cf card drive this set up is going to cost you a bit so
> > >> shop
> > >> > > around on ebay for the scsi xternal cdrom case discard the cdrom
> > >> and
> > >> > > the scsi to ide interface
> > >> > > > ----- Original Message -----
> > >> > > > From: drifter7508
> > >> > > > To: emax@yahoogroups.com
> > >> > > > Sent: Saturday, February 06, 2010 9:20 PM
> > >> > > > Subject: [emax] Point me to the places where to buy the right CF
> > >> > > kit.
> > >> > > >
> > >> > > >
> > >> > > >
> > >> > > > So, Im fed up with all failures now.
> > >> > > >
> > >> > > > Can somebody please point me to a CF kit that actually 100%
> > >> > > > works with EMAX II.
> > >> > > >
> > >> > > > I would not like to buy a slim floppy and such, I'd rather
> > >> have a
> > >> > > > the CF kit installed in an external scsi case.
> > >> > > >
> > >> > > > Thx.
> > >> > > >
> > >> > > >
> > >> > > >
> > >> > > >
> > >> > > >
> > >> > > >
> > >> > > > ----------------------------------------------------------
> > >> > > >
> > >> > > >
> > >> > > >
> > >> > > > No virus found in this incoming message.
> > >> > > > Checked by AVG - www.avg.com
> > >> > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date:
> > >> > > 02/06/10 07:35:00
> > >> > > >
> > >> > > >
> > >> > > > [Non-text portions of this message have been removed]
> > >> > > >
> > >> > >
> > >> > >
> > >> > >
> > >> >
> > >> >
> > >> >
> > >> > [Non-text portions of this message have been removed]
> > >> >
> > >>
> > >>
> > >>
> > >
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> > >
> > >
> > > ------------------------------------
> > >
> > > Emax and Emax II User's Group Website
> > >
> > > http://www.silveriafamily.comYahoo! Groups Links
> > >
> > >
> > >
> >
> >
> > ----------------------------------------------------------
> >
> >
> >
> > No virus found in this incoming message.
> > Checked by AVG - www.avg.com
> > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: 02/06/10
> > 07:35:00
> >
>
>
>
>
>
>
> ----------------------------------------------------------
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.435 / Virus Database: 271.1.1/2672 - Release Date: 02/06/10 19:35:00
>
>
> [Non-text portions of this message have been removed]
>
------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.435 / Virus Database: 271.1.1/2672 - Release Date: 02/06/10 19:35:00
[Non-text portions of this message have been removed]2010-02-07 by drifter7508
No luck with those settings either im afraid. --- In emax@...m, "jammie" <jammie.emma@...> wrote:
> > make sure its set to master pins 1 and 2 shorted > > now your cf card supports dma only so you need to jumper pin 7 this is for dma mode > ----- Original Message ----- > From: drifter7508 > To: emax@yahoogroups.com > Sent: Sunday, February 07, 2010 3:53 PM > Subject: [emax] Re: Point me to the places where to buy the right CF kit. > > > > There is an image of the IDE CF card reader in my earlier post. > (With all the other links an images) > > http://img62.imageshack.us/img62/1481/img0380p.jpg > > Just tried the settings you recom., sadly... no luck at all =( > > --- In emax@...m, "jammie" <jammie.emma@> wrote: > > > > sorry pin 8 is the rom flash pin 9 is the termination this needs to be off for the self termination > > ----- Original Message ----- > > From: drifter7508 > > To: emax@yahoogroups.com > > Sent: Sunday, February 07, 2010 1:28 PM > > Subject: [emax] Re: Point me to the places where to buy the right CF kit. > > > > > > > > > > > > SCSI TO IDE BRIDGE: > > http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=330387956791&ssPageName=STRK:MEWNX:IT > > > > My settings at the moment: > > http://img59.imageshack.us/img59/9342/img0376x.jpg > > > > Jumper settings manual (I think): > > http://eab.abime.net/attachment.php?...8&d=1228279010 > > > > -------------------------------------- > > > > CF IDE READER CARD: > > http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=180328325603&ssPageName=STRK:MEWAX:IT > > > > My settings at the moment: > > http://img62.imageshack.us/img62/1481/img0380p.jpg > > > > ---------------------------------- > > > > Settings for my Panasonic SCSI CD (that would not work either) > > http://img59.imageshack.us/img59/762/img0374v.jpg > > > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > > > what make and models did you buy first > > > > > > what jumper settings are you using as this makes a big difference > > > > > > what ide to cf card adapter are you using as some only support pio mode > > > > > > and the scsi to ide needs to be set to this mode to work > > > > > > the cf card that you got is fine they work > > > > > > can you post pictures of set up as i can tell you what jumpers and settings > > > to get it to work so can ted > > > ----- Original Message ----- > > > From: "Brandt R. Gassman" <brandt@> > > > To: <emax@yahoogroups.com> > > > Sent: Saturday, February 06, 2010 11:41 PM > > > Subject: Re: [emax] Re: Point me to the places where to buy the right CF > > > kit. > > > > > > > > > > Ah, OK. I understand the situation now. Sorry if you've shared this > > > > information with the group already, but what external SCSI devices > > > > have you tried? > > > > > > > > The external SCSI > IDE > CF I'm using is the Spyrus MC-DISK2, which I > > > > purchased from scsiforsamplers.com in 2008 before they ran out. As > > > > noted, I successfully formatted two 1GB SanDisk CF cards with this > > > > unit (set to SCSI device #3). I've also used this device successfully > > > > with my Emulator III (set to device #5). > > > > > > > > Also, what type of Emax II do you have, and are you running the latest > > > > OS (2.14)? My Emax II was running 2.14 when I formatted the cards. > > > > > > > > > > > > On Feb 6, 2010, at 6:09 PM, drifter7508 wrote: > > > > > > > >> I have tried a bunch of different CF cards. > > > >> Most recently Sandisk 512 Mb oldschool > > > >> Dos fat 16 preform. cards. No luck. > > > >> The Emax wont even find the > > > >> units in the scsi connection. So I cant > > > >> format anything. :-( > > > >> > > > >> --- In emax@yahoogroups.com, "Brandt R. Gassman" <brandt@> wrote: > > > >> > > > > >> > What brand of CF cards are you using? How long are you allowing for > > > >> > the cards to format? I just successfully formatted two 1GB CF cards > > > >> > on an Emax II Turbo rack, but each card took about three hours to > > > >> > complete the "Verifying" process. > > > >> > > > > >> > > > > >> > On Feb 6, 2010, at 5:16 PM, drifter7508 wrote: > > > >> > > > > >> > > Isnt that exactly what I recently bought and > > > >> > > failed with? Not the same brand "Acard" > > > >> > > but exactly the same spec. > > > >> > > > > > >> > > I got 2 scsi cases allready. :) > > > >> > > > > > >> > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > >> > > > > > > >> > > > you are going to find it hard now most kits have been sold buy a > > > >> > > acard 7720u scsi to ide adapter by an external scsi cdrom case > > > >> get a > > > >> > > ide to cf adapter try and get a atapi compliant so that it is hot > > > >> > > swappable > > > >> > > > > > > >> > > > and a 5.25"plate to 3.5" plate reducer for the 3.5" floppy size > > > >> > > ide to cf card drive this set up is going to cost you a bit so > > > >> shop > > > >> > > around on ebay for the scsi xternal cdrom case discard the cdrom > > > >> and > > > >> > > the scsi to ide interface > > > >> > > > ----- Original Message ----- > > > >> > > > From: drifter7508 > > > >> > > > To: emax@yahoogroups.com > > > >> > > > Sent: Saturday, February 06, 2010 9:20 PM > > > >> > > > Subject: [emax] Point me to the places where to buy the right CF > > > >> > > kit. > > > >> > > > > > > >> > > > > > > >> > > > > > > >> > > > So, Im fed up with all failures now. > > > >> > > > > > > >> > > > Can somebody please point me to a CF kit that actually 100% > > > >> > > > works with EMAX II. > > > >> > > > > > > >> > > > I would not like to buy a slim floppy and such, I'd rather > > > >> have a > > > >> > > > the CF kit installed in an external scsi case. > > > >> > > > > > > >> > > > Thx. > > > >> > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> > > > ---------------------------------------------------------- > > > >> > > > > > > >> > > > > > > >> > > > > > > >> > > > No virus found in this incoming message. > > > >> > > > Checked by AVG - www.avg.com > > > >> > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: > > > >> > > 02/06/10 07:35:00 > > > >> > > > > > > >> > > > > > > >> > > > [Non-text portions of this message have been removed] > > > >> > > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > >> > > > > >> > > > > >> > [Non-text portions of this message have been removed] > > > >> > > > > >> > > > >> > > > >> > > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > ------------------------------------ > > > > > > > > Emax and Emax II User's Group Website > > > > > > > > http://www.silveriafamily.comYahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > > > > > No virus found in this incoming message. > > > Checked by AVG - www.avg.com > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: 02/06/10 > > > 07:35:00 > > > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > No virus found in this incoming message. > > Checked by AVG - www.avg.com > > Version: 8.5.435 / Virus Database: 271.1.1/2672 - Release Date: 02/06/10 19:35:00 > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > ------------------------------------------------------------------------------ > > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.435 / Virus Database: 271.1.1/2672 - Release Date: 02/06/10 19:35:00 > > > [Non-text portions of this message have been removed] >
2010-02-07 by drifter7508
My Emax II Turbo has the latest OS installed. Internal HD is set to SCSI ID 1. --- In emax@yahoogroups.com, "jammie" <jammie.emma@...> wrote:
> > http://store.compuapps.com/idecf-reader.html > > i think the cf adapter is your problem > > heres a link to good one that works and they do them in black and white and they come in a 3.5" floppy housing > > also what is your emax id channel set to > > but like i said the idsc21-e is the card that works with mine the 1 you have is the updated 1 and does not have the term options like the idsc21-e > > the acard a7720u works with the os that ted has > ----- Original Message ----- > From: drifter7508 > To: emax@yahoogroups.com > Sent: Sunday, February 07, 2010 3:53 PM > Subject: [emax] Re: Point me to the places where to buy the right CF kit. > > > > There is an image of the IDE CF card reader in my earlier post. > (With all the other links an images) > > http://img62.imageshack.us/img62/1481/img0380p.jpg > > Just tried the settings you recom., sadly... no luck at all =( > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > sorry pin 8 is the rom flash pin 9 is the termination this needs to be off for the self termination > > ----- Original Message ----- > > From: drifter7508 > > To: emax@yahoogroups.com > > Sent: Sunday, February 07, 2010 1:28 PM > > Subject: [emax] Re: Point me to the places where to buy the right CF kit. > > > > > > > > > > > > SCSI TO IDE BRIDGE: > > http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=330387956791&ssPageName=STRK:MEWNX:IT > > > > My settings at the moment: > > http://img59.imageshack.us/img59/9342/img0376x.jpg > > > > Jumper settings manual (I think): > > http://eab.abime.net/attachment.php?...8&d=1228279010 > > > > -------------------------------------- > > > > CF IDE READER CARD: > > http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=180328325603&ssPageName=STRK:MEWAX:IT > > > > My settings at the moment: > > http://img62.imageshack.us/img62/1481/img0380p.jpg > > > > ---------------------------------- > > > > Settings for my Panasonic SCSI CD (that would not work either) > > http://img59.imageshack.us/img59/762/img0374v.jpg > > > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > > > what make and models did you buy first > > > > > > what jumper settings are you using as this makes a big difference > > > > > > what ide to cf card adapter are you using as some only support pio mode > > > > > > and the scsi to ide needs to be set to this mode to work > > > > > > the cf card that you got is fine they work > > > > > > can you post pictures of set up as i can tell you what jumpers and settings > > > to get it to work so can ted > > > ----- Original Message ----- > > > From: "Brandt R. Gassman" <brandt@> > > > To: <emax@yahoogroups.com> > > > Sent: Saturday, February 06, 2010 11:41 PM > > > Subject: Re: [emax] Re: Point me to the places where to buy the right CF > > > kit. > > > > > > > > > > Ah, OK. I understand the situation now. Sorry if you've shared this > > > > information with the group already, but what external SCSI devices > > > > have you tried? > > > > > > > > The external SCSI > IDE > CF I'm using is the Spyrus MC-DISK2, which I > > > > purchased from scsiforsamplers.com in 2008 before they ran out. As > > > > noted, I successfully formatted two 1GB SanDisk CF cards with this > > > > unit (set to SCSI device #3). I've also used this device successfully > > > > with my Emulator III (set to device #5). > > > > > > > > Also, what type of Emax II do you have, and are you running the latest > > > > OS (2.14)? My Emax II was running 2.14 when I formatted the cards. > > > > > > > > > > > > On Feb 6, 2010, at 6:09 PM, drifter7508 wrote: > > > > > > > >> I have tried a bunch of different CF cards. > > > >> Most recently Sandisk 512 Mb oldschool > > > >> Dos fat 16 preform. cards. No luck. > > > >> The Emax wont even find the > > > >> units in the scsi connection. So I cant > > > >> format anything. :-( > > > >> > > > >> --- In emax@yahoogroups.com, "Brandt R. Gassman" <brandt@> wrote: > > > >> > > > > >> > What brand of CF cards are you using? How long are you allowing for > > > >> > the cards to format? I just successfully formatted two 1GB CF cards > > > >> > on an Emax II Turbo rack, but each card took about three hours to > > > >> > complete the "Verifying" process. > > > >> > > > > >> > > > > >> > On Feb 6, 2010, at 5:16 PM, drifter7508 wrote: > > > >> > > > > >> > > Isnt that exactly what I recently bought and > > > >> > > failed with? Not the same brand "Acard" > > > >> > > but exactly the same spec. > > > >> > > > > > >> > > I got 2 scsi cases allready. :) > > > >> > > > > > >> > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > >> > > > > > > >> > > > you are going to find it hard now most kits have been sold buy a > > > >> > > acard 7720u scsi to ide adapter by an external scsi cdrom case > > > >> get a > > > >> > > ide to cf adapter try and get a atapi compliant so that it is hot > > > >> > > swappable > > > >> > > > > > > >> > > > and a 5.25"plate to 3.5" plate reducer for the 3.5" floppy size > > > >> > > ide to cf card drive this set up is going to cost you a bit so > > > >> shop > > > >> > > around on ebay for the scsi xternal cdrom case discard the cdrom > > > >> and > > > >> > > the scsi to ide interface > > > >> > > > ----- Original Message ----- > > > >> > > > From: drifter7508 > > > >> > > > To: emax@yahoogroups.com > > > >> > > > Sent: Saturday, February 06, 2010 9:20 PM > > > >> > > > Subject: [emax] Point me to the places where to buy the right CF > > > >> > > kit. > > > >> > > > > > > >> > > > > > > >> > > > > > > >> > > > So, Im fed up with all failures now. > > > >> > > > > > > >> > > > Can somebody please point me to a CF kit that actually 100% > > > >> > > > works with EMAX II. > > > >> > > > > > > >> > > > I would not like to buy a slim floppy and such, I'd rather > > > >> have a > > > >> > > > the CF kit installed in an external scsi case. > > > >> > > > > > > >> > > > Thx. > > > >> > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> > > > ---------------------------------------------------------- > > > >> > > > > > > >> > > > > > > >> > > > > > > >> > > > No virus found in this incoming message. > > > >> > > > Checked by AVG - www.avg.com > > > >> > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: > > > >> > > 02/06/10 07:35:00 > > > >> > > > > > > >> > > > > > > >> > > > [Non-text portions of this message have been removed] > > > >> > > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > >> > > > > >> > > > > >> > [Non-text portions of this message have been removed] > > > >> > > > > >> > > > >> > > > >> > > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > ------------------------------------ > > > > > > > > Emax and Emax II User's Group Website > > > > > > > > http://www.silveriafamily.comYahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > > > > > No virus found in this incoming message. > > > Checked by AVG - www.avg.com > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: 02/06/10 > > > 07:35:00 > > > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > No virus found in this incoming message. > > Checked by AVG - www.avg.com > > Version: 8.5.435 / Virus Database: 271.1.1/2672 - Release Date: 02/06/10 19:35:00 > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > ------------------------------------------------------------------------------ > > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.435 / Virus Database: 271.1.1/2672 - Release Date: 02/06/10 19:35:00 > > > [Non-text portions of this message have been removed] >
2010-02-07 by jammie
try removing pins 4 and 5 what version os is on it what scsi cables are you using and have you got a termination plug on there aswell as you dont need it if you leave pins 9 jumper off
----- Original Message -----
From: drifter7508
To: emax@yahoogroups.com
Sent: Sunday, February 07, 2010 5:53 PM
Subject: [emax] Re: Point me to the places where to buy the right CF kit.
No luck with those settings either im afraid.
--- In emax@yahoogroups.com, "jammie" <jammie.emma@...> wrote:
>
> make sure its set to master pins 1 and 2 shorted
>
> now your cf card supports dma only so you need to jumper pin 7 this is for dma mode
> ----- Original Message -----
> From: drifter7508
> To: emax@yahoogroups.com
> Sent: Sunday, February 07, 2010 3:53 PM
> Subject: [emax] Re: Point me to the places where to buy the right CF kit.
>
>
>
> There is an image of the IDE CF card reader in my earlier post.
> (With all the other links an images)
>
> http://img62.imageshack.us/img62/1481/img0380p.jpg
>
> Just tried the settings you recom., sadly... no luck at all =(
>
> --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> >
> > sorry pin 8 is the rom flash pin 9 is the termination this needs to be off for the self termination
> > ----- Original Message -----
> > From: drifter7508
> > To: emax@yahoogroups.com
> > Sent: Sunday, February 07, 2010 1:28 PM
> > Subject: [emax] Re: Point me to the places where to buy the right CF kit.
> >
> >
> >
> >
> >
> > SCSI TO IDE BRIDGE:
> > http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=330387956791&ssPageName=STRK:MEWNX:IT
> >
> > My settings at the moment:
> > http://img59.imageshack.us/img59/9342/img0376x.jpg
> >
> > Jumper settings manual (I think):
> > http://eab.abime.net/attachment.php?...8&d=1228279010
> >
> > --------------------------------------
> >
> > CF IDE READER CARD:
> > http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=180328325603&ssPageName=STRK:MEWAX:IT
> >
> > My settings at the moment:
> > http://img62.imageshack.us/img62/1481/img0380p.jpg
> >
> > ----------------------------------
> >
> > Settings for my Panasonic SCSI CD (that would not work either)
> > http://img59.imageshack.us/img59/762/img0374v.jpg
> >
> > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> > >
> > > what make and models did you buy first
> > >
> > > what jumper settings are you using as this makes a big difference
> > >
> > > what ide to cf card adapter are you using as some only support pio mode
> > >
> > > and the scsi to ide needs to be set to this mode to work
> > >
> > > the cf card that you got is fine they work
> > >
> > > can you post pictures of set up as i can tell you what jumpers and settings
> > > to get it to work so can ted
> > > ----- Original Message -----
> > > From: "Brandt R. Gassman" <brandt@>
> > > To: <emax@yahoogroups.com>
> > > Sent: Saturday, February 06, 2010 11:41 PM
> > > Subject: Re: [emax] Re: Point me to the places where to buy the right CF
> > > kit.
> > >
> > >
> > > > Ah, OK. I understand the situation now. Sorry if you've shared this
> > > > information with the group already, but what external SCSI devices
> > > > have you tried?
> > > >
> > > > The external SCSI > IDE > CF I'm using is the Spyrus MC-DISK2, which I
> > > > purchased from scsiforsamplers.com in 2008 before they ran out. As
> > > > noted, I successfully formatted two 1GB SanDisk CF cards with this
> > > > unit (set to SCSI device #3). I've also used this device successfully
> > > > with my Emulator III (set to device #5).
> > > >
> > > > Also, what type of Emax II do you have, and are you running the latest
> > > > OS (2.14)? My Emax II was running 2.14 when I formatted the cards.
> > > >
> > > >
> > > > On Feb 6, 2010, at 6:09 PM, drifter7508 wrote:
> > > >
> > > >> I have tried a bunch of different CF cards.
> > > >> Most recently Sandisk 512 Mb oldschool
> > > >> Dos fat 16 preform. cards. No luck.
> > > >> The Emax wont even find the
> > > >> units in the scsi connection. So I cant
> > > >> format anything. :-(
> > > >>
> > > >> --- In emax@yahoogroups.com, "Brandt R. Gassman" <brandt@> wrote:
> > > >> >
> > > >> > What brand of CF cards are you using? How long are you allowing for
> > > >> > the cards to format? I just successfully formatted two 1GB CF cards
> > > >> > on an Emax II Turbo rack, but each card took about three hours to
> > > >> > complete the "Verifying" process.
> > > >> >
> > > >> >
> > > >> > On Feb 6, 2010, at 5:16 PM, drifter7508 wrote:
> > > >> >
> > > >> > > Isnt that exactly what I recently bought and
> > > >> > > failed with? Not the same brand "Acard"
> > > >> > > but exactly the same spec.
> > > >> > >
> > > >> > > I got 2 scsi cases allready. :)
> > > >> > >
> > > >> > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> > > >> > > >
> > > >> > > > you are going to find it hard now most kits have been sold buy a
> > > >> > > acard 7720u scsi to ide adapter by an external scsi cdrom case
> > > >> get a
> > > >> > > ide to cf adapter try and get a atapi compliant so that it is hot
> > > >> > > swappable
> > > >> > > >
> > > >> > > > and a 5.25"plate to 3.5" plate reducer for the 3.5" floppy size
> > > >> > > ide to cf card drive this set up is going to cost you a bit so
> > > >> shop
> > > >> > > around on ebay for the scsi xternal cdrom case discard the cdrom
> > > >> and
> > > >> > > the scsi to ide interface
> > > >> > > > ----- Original Message -----
> > > >> > > > From: drifter7508
> > > >> > > > To: emax@yahoogroups.com
> > > >> > > > Sent: Saturday, February 06, 2010 9:20 PM
> > > >> > > > Subject: [emax] Point me to the places where to buy the right CF
> > > >> > > kit.
> > > >> > > >
> > > >> > > >
> > > >> > > >
> > > >> > > > So, Im fed up with all failures now.
> > > >> > > >
> > > >> > > > Can somebody please point me to a CF kit that actually 100%
> > > >> > > > works with EMAX II.
> > > >> > > >
> > > >> > > > I would not like to buy a slim floppy and such, I'd rather
> > > >> have a
> > > >> > > > the CF kit installed in an external scsi case.
> > > >> > > >
> > > >> > > > Thx.
> > > >> > > >
> > > >> > > >
> > > >> > > >
> > > >> > > >
> > > >> > > >
> > > >> > > >
> > > >> > > > ----------------------------------------------------------
> > > >> > > >
> > > >> > > >
> > > >> > > >
> > > >> > > > No virus found in this incoming message.
> > > >> > > > Checked by AVG - www.avg.com
> > > >> > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date:
> > > >> > > 02/06/10 07:35:00
> > > >> > > >
> > > >> > > >
> > > >> > > > [Non-text portions of this message have been removed]
> > > >> > > >
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> >
> > > >> >
> > > >> >
> > > >> > [Non-text portions of this message have been removed]
> > > >> >
> > > >>
> > > >>
> > > >>
> > > >
> > > >
> > > >
> > > > [Non-text portions of this message have been removed]
> > > >
> > > >
> > > >
> > > > ------------------------------------
> > > >
> > > > Emax and Emax II User's Group Website
> > > >
> > > > http://www.silveriafamily.comYahoo! Groups Links
> > > >
> > > >
> > > >
> > >
> > >
> > > ----------------------------------------------------------
> > >
> > >
> > >
> > > No virus found in this incoming message.
> > > Checked by AVG - www.avg.com
> > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: 02/06/10
> > > 07:35:00
> > >
> >
> >
> >
> >
> >
> >
> > ----------------------------------------------------------
> >
> >
> >
> > No virus found in this incoming message.
> > Checked by AVG - www.avg.com
> > Version: 8.5.435 / Virus Database: 271.1.1/2672 - Release Date: 02/06/10 19:35:00
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>
>
>
>
> ----------------------------------------------------------
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.435 / Virus Database: 271.1.1/2672 - Release Date: 02/06/10 19:35:00
>
>
> [Non-text portions of this message have been removed]
>
------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.435 / Virus Database: 271.1.1/2673 - Release Date: 02/07/10 07:22:00
[Non-text portions of this message have been removed]2010-02-07 by jammie
have you tried it with any other hd or cdrom are you the 1 who had problems with the scsi cdrom also have you tried disabling the internal hd to see if it works then some off the old scsi drives cuase problems when more than 1 on a system
----- Original Message -----
From: drifter7508
To: emax@yahoogroups.com
Sent: Sunday, February 07, 2010 5:58 PM
Subject: [emax] Re: Point me to the places where to buy the right CF kit.
My Emax II Turbo has the latest OS installed.
Internal HD is set to SCSI ID 1.
--- In emax@yahoogroups.com, "jammie" <jammie.emma@...> wrote:
>
> http://store.compuapps.com/idecf-reader.html
>
> i think the cf adapter is your problem
>
> heres a link to good one that works and they do them in black and white and they come in a 3.5" floppy housing
>
> also what is your emax id channel set to
>
> but like i said the idsc21-e is the card that works with mine the 1 you have is the updated 1 and does not have the term options like the idsc21-e
>
> the acard a7720u works with the os that ted has
> ----- Original Message -----
> From: drifter7508
> To: emax@yahoogroups.com
> Sent: Sunday, February 07, 2010 3:53 PM
> Subject: [emax] Re: Point me to the places where to buy the right CF kit.
>
>
>
> There is an image of the IDE CF card reader in my earlier post.
> (With all the other links an images)
>
> http://img62.imageshack.us/img62/1481/img0380p.jpg
>
> Just tried the settings you recom., sadly... no luck at all =(
>
> --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> >
> > sorry pin 8 is the rom flash pin 9 is the termination this needs to be off for the self termination
> > ----- Original Message -----
> > From: drifter7508
> > To: emax@yahoogroups.com
> > Sent: Sunday, February 07, 2010 1:28 PM
> > Subject: [emax] Re: Point me to the places where to buy the right CF kit.
> >
> >
> >
> >
> >
> > SCSI TO IDE BRIDGE:
> > http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=330387956791&ssPageName=STRK:MEWNX:IT
> >
> > My settings at the moment:
> > http://img59.imageshack.us/img59/9342/img0376x.jpg
> >
> > Jumper settings manual (I think):
> > http://eab.abime.net/attachment.php?...8&d=1228279010
> >
> > --------------------------------------
> >
> > CF IDE READER CARD:
> > http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=180328325603&ssPageName=STRK:MEWAX:IT
> >
> > My settings at the moment:
> > http://img62.imageshack.us/img62/1481/img0380p.jpg
> >
> > ----------------------------------
> >
> > Settings for my Panasonic SCSI CD (that would not work either)
> > http://img59.imageshack.us/img59/762/img0374v.jpg
> >
> > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> > >
> > > what make and models did you buy first
> > >
> > > what jumper settings are you using as this makes a big difference
> > >
> > > what ide to cf card adapter are you using as some only support pio mode
> > >
> > > and the scsi to ide needs to be set to this mode to work
> > >
> > > the cf card that you got is fine they work
> > >
> > > can you post pictures of set up as i can tell you what jumpers and settings
> > > to get it to work so can ted
> > > ----- Original Message -----
> > > From: "Brandt R. Gassman" <brandt@>
> > > To: <emax@yahoogroups.com>
> > > Sent: Saturday, February 06, 2010 11:41 PM
> > > Subject: Re: [emax] Re: Point me to the places where to buy the right CF
> > > kit.
> > >
> > >
> > > > Ah, OK. I understand the situation now. Sorry if you've shared this
> > > > information with the group already, but what external SCSI devices
> > > > have you tried?
> > > >
> > > > The external SCSI > IDE > CF I'm using is the Spyrus MC-DISK2, which I
> > > > purchased from scsiforsamplers.com in 2008 before they ran out. As
> > > > noted, I successfully formatted two 1GB SanDisk CF cards with this
> > > > unit (set to SCSI device #3). I've also used this device successfully
> > > > with my Emulator III (set to device #5).
> > > >
> > > > Also, what type of Emax II do you have, and are you running the latest
> > > > OS (2.14)? My Emax II was running 2.14 when I formatted the cards.
> > > >
> > > >
> > > > On Feb 6, 2010, at 6:09 PM, drifter7508 wrote:
> > > >
> > > >> I have tried a bunch of different CF cards.
> > > >> Most recently Sandisk 512 Mb oldschool
> > > >> Dos fat 16 preform. cards. No luck.
> > > >> The Emax wont even find the
> > > >> units in the scsi connection. So I cant
> > > >> format anything. :-(
> > > >>
> > > >> --- In emax@yahoogroups.com, "Brandt R. Gassman" <brandt@> wrote:
> > > >> >
> > > >> > What brand of CF cards are you using? How long are you allowing for
> > > >> > the cards to format? I just successfully formatted two 1GB CF cards
> > > >> > on an Emax II Turbo rack, but each card took about three hours to
> > > >> > complete the "Verifying" process.
> > > >> >
> > > >> >
> > > >> > On Feb 6, 2010, at 5:16 PM, drifter7508 wrote:
> > > >> >
> > > >> > > Isnt that exactly what I recently bought and
> > > >> > > failed with? Not the same brand "Acard"
> > > >> > > but exactly the same spec.
> > > >> > >
> > > >> > > I got 2 scsi cases allready. :)
> > > >> > >
> > > >> > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> > > >> > > >
> > > >> > > > you are going to find it hard now most kits have been sold buy a
> > > >> > > acard 7720u scsi to ide adapter by an external scsi cdrom case
> > > >> get a
> > > >> > > ide to cf adapter try and get a atapi compliant so that it is hot
> > > >> > > swappable
> > > >> > > >
> > > >> > > > and a 5.25"plate to 3.5" plate reducer for the 3.5" floppy size
> > > >> > > ide to cf card drive this set up is going to cost you a bit so
> > > >> shop
> > > >> > > around on ebay for the scsi xternal cdrom case discard the cdrom
> > > >> and
> > > >> > > the scsi to ide interface
> > > >> > > > ----- Original Message -----
> > > >> > > > From: drifter7508
> > > >> > > > To: emax@yahoogroups.com
> > > >> > > > Sent: Saturday, February 06, 2010 9:20 PM
> > > >> > > > Subject: [emax] Point me to the places where to buy the right CF
> > > >> > > kit.
> > > >> > > >
> > > >> > > >
> > > >> > > >
> > > >> > > > So, Im fed up with all failures now.
> > > >> > > >
> > > >> > > > Can somebody please point me to a CF kit that actually 100%
> > > >> > > > works with EMAX II.
> > > >> > > >
> > > >> > > > I would not like to buy a slim floppy and such, I'd rather
> > > >> have a
> > > >> > > > the CF kit installed in an external scsi case.
> > > >> > > >
> > > >> > > > Thx.
> > > >> > > >
> > > >> > > >
> > > >> > > >
> > > >> > > >
> > > >> > > >
> > > >> > > >
> > > >> > > > ----------------------------------------------------------
> > > >> > > >
> > > >> > > >
> > > >> > > >
> > > >> > > > No virus found in this incoming message.
> > > >> > > > Checked by AVG - www.avg.com
> > > >> > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date:
> > > >> > > 02/06/10 07:35:00
> > > >> > > >
> > > >> > > >
> > > >> > > > [Non-text portions of this message have been removed]
> > > >> > > >
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> >
> > > >> >
> > > >> >
> > > >> > [Non-text portions of this message have been removed]
> > > >> >
> > > >>
> > > >>
> > > >>
> > > >
> > > >
> > > >
> > > > [Non-text portions of this message have been removed]
> > > >
> > > >
> > > >
> > > > ------------------------------------
> > > >
> > > > Emax and Emax II User's Group Website
> > > >
> > > > http://www.silveriafamily.comYahoo! Groups Links
> > > >
> > > >
> > > >
> > >
> > >
> > > ----------------------------------------------------------
> > >
> > >
> > >
> > > No virus found in this incoming message.
> > > Checked by AVG - www.avg.com
> > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: 02/06/10
> > > 07:35:00
> > >
> >
> >
> >
> >
> >
> >
> > ----------------------------------------------------------
> >
> >
> >
> > No virus found in this incoming message.
> > Checked by AVG - www.avg.com
> > Version: 8.5.435 / Virus Database: 271.1.1/2672 - Release Date: 02/06/10 19:35:00
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>
>
>
>
> ----------------------------------------------------------
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.435 / Virus Database: 271.1.1/2672 - Release Date: 02/06/10 19:35:00
>
>
> [Non-text portions of this message have been removed]
>
------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.435 / Virus Database: 271.1.1/2673 - Release Date: 02/07/10 07:22:00
[Non-text portions of this message have been removed]2010-02-07 by thenewyorkcowboy
What is the final formatted capacity of the 1GB cards? Do they format anything above 540mb? --- In emax@yahoogroups.com, "Brandt R. Gassman" <brandt@...> wrote:
> > What brand of CF cards are you using? How long are you allowing for > the cards to format? I just successfully formatted two 1GB CF cards > on an Emax II Turbo rack, but each card took about three hours to > complete the "Verifying" process. > > > On Feb 6, 2010, at 5:16 PM, drifter7508 wrote: > > > Isnt that exactly what I recently bought and > > failed with? Not the same brand "Acard" > > but exactly the same spec. > > > > I got 2 scsi cases allready. :) > > > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > > > you are going to find it hard now most kits have been sold buy a > > acard 7720u scsi to ide adapter by an external scsi cdrom case get a > > ide to cf adapter try and get a atapi compliant so that it is hot > > swappable > > > > > > and a 5.25"plate to 3.5" plate reducer for the 3.5" floppy size > > ide to cf card drive this set up is going to cost you a bit so shop > > around on ebay for the scsi xternal cdrom case discard the cdrom and > > the scsi to ide interface > > > ----- Original Message ----- > > > From: drifter7508 > > > To: emax@yahoogroups.com > > > Sent: Saturday, February 06, 2010 9:20 PM > > > Subject: [emax] Point me to the places where to buy the right CF > > kit. > > > > > > > > > > > > So, Im fed up with all failures now. > > > > > > Can somebody please point me to a CF kit that actually 100% > > > works with EMAX II. > > > > > > I would not like to buy a slim floppy and such, I'd rather have a > > > the CF kit installed in an external scsi case. > > > > > > Thx. > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > > > > > No virus found in this incoming message. > > > Checked by AVG - www.avg.com > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: > > 02/06/10 07:35:00 > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > [Non-text portions of this message have been removed] >
2010-02-07 by drifter7508
Yes Im the one with the CD-Rom you recom. to buy. I have tried 2 different Quantum HD's in both my external cases and they run perfect in both of them. They also run perfect along with the internal HD at the same time. Have also tried all things with the internal HD disabled. I have OS 2.14 in my Turbo. --- In emax@yahoogroups.com, "jammie" <jammie.emma@...> wrote:
> > have you tried it with any other hd or cdrom > > are you the 1 who had problems with the scsi cdrom > > also have you tried disabling the internal hd to see if it works then some off the old scsi drives cuase problems when more than 1 on a system > ----- Original Message ----- > From: drifter7508 > To: emax@yahoogroups.com > Sent: Sunday, February 07, 2010 5:58 PM > Subject: [emax] Re: Point me to the places where to buy the right CF kit. > > > > My Emax II Turbo has the latest OS installed. > > Internal HD is set to SCSI ID 1. > > --- In emax@...m, "jammie" <jammie.emma@> wrote: > > > > http://store.compuapps.com/idecf-reader.html > > > > i think the cf adapter is your problem > > > > heres a link to good one that works and they do them in black and white and they come in a 3.5" floppy housing > > > > also what is your emax id channel set to > > > > but like i said the idsc21-e is the card that works with mine the 1 you have is the updated 1 and does not have the term options like the idsc21-e > > > > the acard a7720u works with the os that ted has > > ----- Original Message ----- > > From: drifter7508 > > To: emax@yahoogroups.com > > Sent: Sunday, February 07, 2010 3:53 PM > > Subject: [emax] Re: Point me to the places where to buy the right CF kit. > > > > > > > > There is an image of the IDE CF card reader in my earlier post. > > (With all the other links an images) > > > > http://img62.imageshack.us/img62/1481/img0380p.jpg > > > > Just tried the settings you recom., sadly... no luck at all =( > > > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > > > sorry pin 8 is the rom flash pin 9 is the termination this needs to be off for the self termination > > > ----- Original Message ----- > > > From: drifter7508 > > > To: emax@yahoogroups.com > > > Sent: Sunday, February 07, 2010 1:28 PM > > > Subject: [emax] Re: Point me to the places where to buy the right CF kit. > > > > > > > > > > > > > > > > > > SCSI TO IDE BRIDGE: > > > http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=330387956791&ssPageName=STRK:MEWNX:IT > > > > > > My settings at the moment: > > > http://img59.imageshack.us/img59/9342/img0376x.jpg > > > > > > Jumper settings manual (I think): > > > http://eab.abime.net/attachment.php?...8&d=1228279010 > > > > > > -------------------------------------- > > > > > > CF IDE READER CARD: > > > http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=180328325603&ssPageName=STRK:MEWAX:IT > > > > > > My settings at the moment: > > > http://img62.imageshack.us/img62/1481/img0380p.jpg > > > > > > ---------------------------------- > > > > > > Settings for my Panasonic SCSI CD (that would not work either) > > > http://img59.imageshack.us/img59/762/img0374v.jpg > > > > > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > > > > > what make and models did you buy first > > > > > > > > what jumper settings are you using as this makes a big difference > > > > > > > > what ide to cf card adapter are you using as some only support pio mode > > > > > > > > and the scsi to ide needs to be set to this mode to work > > > > > > > > the cf card that you got is fine they work > > > > > > > > can you post pictures of set up as i can tell you what jumpers and settings > > > > to get it to work so can ted > > > > ----- Original Message ----- > > > > From: "Brandt R. Gassman" <brandt@> > > > > To: <emax@yahoogroups.com> > > > > Sent: Saturday, February 06, 2010 11:41 PM > > > > Subject: Re: [emax] Re: Point me to the places where to buy the right CF > > > > kit. > > > > > > > > > > > > > Ah, OK. I understand the situation now. Sorry if you've shared this > > > > > information with the group already, but what external SCSI devices > > > > > have you tried? > > > > > > > > > > The external SCSI > IDE > CF I'm using is the Spyrus MC-DISK2, which I > > > > > purchased from scsiforsamplers.com in 2008 before they ran out. As > > > > > noted, I successfully formatted two 1GB SanDisk CF cards with this > > > > > unit (set to SCSI device #3). I've also used this device successfully > > > > > with my Emulator III (set to device #5). > > > > > > > > > > Also, what type of Emax II do you have, and are you running the latest > > > > > OS (2.14)? My Emax II was running 2.14 when I formatted the cards. > > > > > > > > > > > > > > > On Feb 6, 2010, at 6:09 PM, drifter7508 wrote: > > > > > > > > > >> I have tried a bunch of different CF cards. > > > > >> Most recently Sandisk 512 Mb oldschool > > > > >> Dos fat 16 preform. cards. No luck. > > > > >> The Emax wont even find the > > > > >> units in the scsi connection. So I cant > > > > >> format anything. :-( > > > > >> > > > > >> --- In emax@yahoogroups.com, "Brandt R. Gassman" <brandt@> wrote: > > > > >> > > > > > >> > What brand of CF cards are you using? How long are you allowing for > > > > >> > the cards to format? I just successfully formatted two 1GB CF cards > > > > >> > on an Emax II Turbo rack, but each card took about three hours to > > > > >> > complete the "Verifying" process. > > > > >> > > > > > >> > > > > > >> > On Feb 6, 2010, at 5:16 PM, drifter7508 wrote: > > > > >> > > > > > >> > > Isnt that exactly what I recently bought and > > > > >> > > failed with? Not the same brand "Acard" > > > > >> > > but exactly the same spec. > > > > >> > > > > > > >> > > I got 2 scsi cases allready. :) > > > > >> > > > > > > >> > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > >> > > > > > > > >> > > > you are going to find it hard now most kits have been sold buy a > > > > >> > > acard 7720u scsi to ide adapter by an external scsi cdrom case > > > > >> get a > > > > >> > > ide to cf adapter try and get a atapi compliant so that it is hot > > > > >> > > swappable > > > > >> > > > > > > > >> > > > and a 5.25"plate to 3.5" plate reducer for the 3.5" floppy size > > > > >> > > ide to cf card drive this set up is going to cost you a bit so > > > > >> shop > > > > >> > > around on ebay for the scsi xternal cdrom case discard the cdrom > > > > >> and > > > > >> > > the scsi to ide interface > > > > >> > > > ----- Original Message ----- > > > > >> > > > From: drifter7508 > > > > >> > > > To: emax@yahoogroups.com > > > > >> > > > Sent: Saturday, February 06, 2010 9:20 PM > > > > >> > > > Subject: [emax] Point me to the places where to buy the right CF > > > > >> > > kit. > > > > >> > > > > > > > >> > > > > > > > >> > > > > > > > >> > > > So, Im fed up with all failures now. > > > > >> > > > > > > > >> > > > Can somebody please point me to a CF kit that actually 100% > > > > >> > > > works with EMAX II. > > > > >> > > > > > > > >> > > > I would not like to buy a slim floppy and such, I'd rather > > > > >> have a > > > > >> > > > the CF kit installed in an external scsi case. > > > > >> > > > > > > > >> > > > Thx. > > > > >> > > > > > > > >> > > > > > > > >> > > > > > > > >> > > > > > > > >> > > > > > > > >> > > > > > > > >> > > > ---------------------------------------------------------- > > > > >> > > > > > > > >> > > > > > > > >> > > > > > > > >> > > > No virus found in this incoming message. > > > > >> > > > Checked by AVG - www.avg.com > > > > >> > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: > > > > >> > > 02/06/10 07:35:00 > > > > >> > > > > > > > >> > > > > > > > >> > > > [Non-text portions of this message have been removed] > > > > >> > > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> > > > > > >> > > > > > >> > > > > > >> > [Non-text portions of this message have been removed] > > > > >> > > > > > >> > > > > >> > > > > >> > > > > > > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > > > > ------------------------------------ > > > > > > > > > > Emax and Emax II User's Group Website > > > > > > > > > > http://www.silveriafamily.comYahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > > > > > > > > > No virus found in this incoming message. > > > > Checked by AVG - www.avg.com > > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: 02/06/10 > > > > 07:35:00 > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > > > > > No virus found in this incoming message. > > > Checked by AVG - www.avg.com > > > Version: 8.5.435 / Virus Database: 271.1.1/2672 - Release Date: 02/06/10 19:35:00 > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > No virus found in this incoming message. > > Checked by AVG - www.avg.com > > Version: 8.5.435 / Virus Database: 271.1.1/2672 - Release Date: 02/06/10 19:35:00 > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > ------------------------------------------------------------------------------ > > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.435 / Virus Database: 271.1.1/2673 - Release Date: 02/07/10 07:22:00 > > > [Non-text portions of this message have been removed] >
2010-02-07 by jammie
650mb
----- Original Message -----
From: thenewyorkcowboy
To: emax@yahoogroups.com
Sent: Sunday, February 07, 2010 6:40 PM
Subject: [emax] Re: Point me to the places where to buy the right CF kit.
What is the final formatted capacity of the 1GB cards? Do they format anything above 540mb?
--- In emax@yahoogroups.com, "Brandt R. Gassman" <brandt@...> wrote:
>
> What brand of CF cards are you using? How long are you allowing for
> the cards to format? I just successfully formatted two 1GB CF cards
> on an Emax II Turbo rack, but each card took about three hours to
> complete the "Verifying" process.
>
>
> On Feb 6, 2010, at 5:16 PM, drifter7508 wrote:
>
> > Isnt that exactly what I recently bought and
> > failed with? Not the same brand "Acard"
> > but exactly the same spec.
> >
> > I got 2 scsi cases allready. :)
> >
> > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> > >
> > > you are going to find it hard now most kits have been sold buy a
> > acard 7720u scsi to ide adapter by an external scsi cdrom case get a
> > ide to cf adapter try and get a atapi compliant so that it is hot
> > swappable
> > >
> > > and a 5.25"plate to 3.5" plate reducer for the 3.5" floppy size
> > ide to cf card drive this set up is going to cost you a bit so shop
> > around on ebay for the scsi xternal cdrom case discard the cdrom and
> > the scsi to ide interface
> > > ----- Original Message -----
> > > From: drifter7508
> > > To: emax@yahoogroups.com
> > > Sent: Saturday, February 06, 2010 9:20 PM
> > > Subject: [emax] Point me to the places where to buy the right CF
> > kit.
> > >
> > >
> > >
> > > So, Im fed up with all failures now.
> > >
> > > Can somebody please point me to a CF kit that actually 100%
> > > works with EMAX II.
> > >
> > > I would not like to buy a slim floppy and such, I'd rather have a
> > > the CF kit installed in an external scsi case.
> > >
> > > Thx.
> > >
> > >
> > >
> > >
> > >
> > >
> > > ----------------------------------------------------------
> > >
> > >
> > >
> > > No virus found in this incoming message.
> > > Checked by AVG - www.avg.com
> > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date:
> > 02/06/10 07:35:00
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> >
> >
> >
>
>
>
> [Non-text portions of this message have been removed]
>
------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.435 / Virus Database: 271.1.1/2673 - Release Date: 02/07/10 07:22:00
[Non-text portions of this message have been removed]2010-02-07 by jammie
i dont know what to surgest as that cdrom works on mine the r-idsc-e/r scsi to ide card that 1 dont work for my ensoniqs and i have not tried the emaxes with that card i know it works with a yam a3000 as i have 1 attached to mine the card i recomended was the iscd21-e but they have all gone scsifoursamplers brought them all for him to sell for the eps and asr10 samplers the only other cards are the acard7720u but they are like rocking horse pooh now the acard 7726 might work with a software revision ask ted as he sold me some 7722 cards that work but are only atapi you can use them with standard cdroms and atapi zip drives im making some atapi cf card adapters but am only at project stage at the moment i might have a spare 1 ill have a look at my inventory as most have been installed into samplers already
----- Original Message -----
From: drifter7508
To: emax@yahoogroups.com
Sent: Sunday, February 07, 2010 6:57 PM
Subject: [emax] Re: Point me to the places where to buy the right CF kit.
Yes Im the one with the CD-Rom you recom. to buy.
I have tried 2 different Quantum HD's in both my
external cases and they run perfect in both of them.
They also run perfect along with the internal HD at the same time.
Have also tried all things with the internal HD disabled.
I have OS 2.14 in my Turbo.
--- In emax@yahoogroups.com, "jammie" <jammie.emma@...> wrote:
>
> have you tried it with any other hd or cdrom
>
> are you the 1 who had problems with the scsi cdrom
>
> also have you tried disabling the internal hd to see if it works then some off the old scsi drives cuase problems when more than 1 on a system
> ----- Original Message -----
> From: drifter7508
> To: emax@yahoogroups.com
> Sent: Sunday, February 07, 2010 5:58 PM
> Subject: [emax] Re: Point me to the places where to buy the right CF kit.
>
>
>
> My Emax II Turbo has the latest OS installed.
>
> Internal HD is set to SCSI ID 1.
>
> --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> >
> > http://store.compuapps.com/idecf-reader.html
> >
> > i think the cf adapter is your problem
> >
> > heres a link to good one that works and they do them in black and white and they come in a 3.5" floppy housing
> >
> > also what is your emax id channel set to
> >
> > but like i said the idsc21-e is the card that works with mine the 1 you have is the updated 1 and does not have the term options like the idsc21-e
> >
> > the acard a7720u works with the os that ted has
> > ----- Original Message -----
> > From: drifter7508
> > To: emax@yahoogroups.com
> > Sent: Sunday, February 07, 2010 3:53 PM
> > Subject: [emax] Re: Point me to the places where to buy the right CF kit.
> >
> >
> >
> > There is an image of the IDE CF card reader in my earlier post.
> > (With all the other links an images)
> >
> > http://img62.imageshack.us/img62/1481/img0380p.jpg
> >
> > Just tried the settings you recom., sadly... no luck at all =(
> >
> > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> > >
> > > sorry pin 8 is the rom flash pin 9 is the termination this needs to be off for the self termination
> > > ----- Original Message -----
> > > From: drifter7508
> > > To: emax@yahoogroups.com
> > > Sent: Sunday, February 07, 2010 1:28 PM
> > > Subject: [emax] Re: Point me to the places where to buy the right CF kit.
> > >
> > >
> > >
> > >
> > >
> > > SCSI TO IDE BRIDGE:
> > > http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=330387956791&ssPageName=STRK:MEWNX:IT
> > >
> > > My settings at the moment:
> > > http://img59.imageshack.us/img59/9342/img0376x.jpg
> > >
> > > Jumper settings manual (I think):
> > > http://eab.abime.net/attachment.php?...8&d=1228279010
> > >
> > > --------------------------------------
> > >
> > > CF IDE READER CARD:
> > > http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=180328325603&ssPageName=STRK:MEWAX:IT
> > >
> > > My settings at the moment:
> > > http://img62.imageshack.us/img62/1481/img0380p.jpg
> > >
> > > ----------------------------------
> > >
> > > Settings for my Panasonic SCSI CD (that would not work either)
> > > http://img59.imageshack.us/img59/762/img0374v.jpg
> > >
> > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> > > >
> > > > what make and models did you buy first
> > > >
> > > > what jumper settings are you using as this makes a big difference
> > > >
> > > > what ide to cf card adapter are you using as some only support pio mode
> > > >
> > > > and the scsi to ide needs to be set to this mode to work
> > > >
> > > > the cf card that you got is fine they work
> > > >
> > > > can you post pictures of set up as i can tell you what jumpers and settings
> > > > to get it to work so can ted
> > > > ----- Original Message -----
> > > > From: "Brandt R. Gassman" <brandt@>
> > > > To: <emax@yahoogroups.com>
> > > > Sent: Saturday, February 06, 2010 11:41 PM
> > > > Subject: Re: [emax] Re: Point me to the places where to buy the right CF
> > > > kit.
> > > >
> > > >
> > > > > Ah, OK. I understand the situation now. Sorry if you've shared this
> > > > > information with the group already, but what external SCSI devices
> > > > > have you tried?
> > > > >
> > > > > The external SCSI > IDE > CF I'm using is the Spyrus MC-DISK2, which I
> > > > > purchased from scsiforsamplers.com in 2008 before they ran out. As
> > > > > noted, I successfully formatted two 1GB SanDisk CF cards with this
> > > > > unit (set to SCSI device #3). I've also used this device successfully
> > > > > with my Emulator III (set to device #5).
> > > > >
> > > > > Also, what type of Emax II do you have, and are you running the latest
> > > > > OS (2.14)? My Emax II was running 2.14 when I formatted the cards.
> > > > >
> > > > >
> > > > > On Feb 6, 2010, at 6:09 PM, drifter7508 wrote:
> > > > >
> > > > >> I have tried a bunch of different CF cards.
> > > > >> Most recently Sandisk 512 Mb oldschool
> > > > >> Dos fat 16 preform. cards. No luck.
> > > > >> The Emax wont even find the
> > > > >> units in the scsi connection. So I cant
> > > > >> format anything. :-(
> > > > >>
> > > > >> --- In emax@yahoogroups.com, "Brandt R. Gassman" <brandt@> wrote:
> > > > >> >
> > > > >> > What brand of CF cards are you using? How long are you allowing for
> > > > >> > the cards to format? I just successfully formatted two 1GB CF cards
> > > > >> > on an Emax II Turbo rack, but each card took about three hours to
> > > > >> > complete the "Verifying" process.
> > > > >> >
> > > > >> >
> > > > >> > On Feb 6, 2010, at 5:16 PM, drifter7508 wrote:
> > > > >> >
> > > > >> > > Isnt that exactly what I recently bought and
> > > > >> > > failed with? Not the same brand "Acard"
> > > > >> > > but exactly the same spec.
> > > > >> > >
> > > > >> > > I got 2 scsi cases allready. :)
> > > > >> > >
> > > > >> > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> > > > >> > > >
> > > > >> > > > you are going to find it hard now most kits have been sold buy a
> > > > >> > > acard 7720u scsi to ide adapter by an external scsi cdrom case
> > > > >> get a
> > > > >> > > ide to cf adapter try and get a atapi compliant so that it is hot
> > > > >> > > swappable
> > > > >> > > >
> > > > >> > > > and a 5.25"plate to 3.5" plate reducer for the 3.5" floppy size
> > > > >> > > ide to cf card drive this set up is going to cost you a bit so
> > > > >> shop
> > > > >> > > around on ebay for the scsi xternal cdrom case discard the cdrom
> > > > >> and
> > > > >> > > the scsi to ide interface
> > > > >> > > > ----- Original Message -----
> > > > >> > > > From: drifter7508
> > > > >> > > > To: emax@yahoogroups.com
> > > > >> > > > Sent: Saturday, February 06, 2010 9:20 PM
> > > > >> > > > Subject: [emax] Point me to the places where to buy the right CF
> > > > >> > > kit.
> > > > >> > > >
> > > > >> > > >
> > > > >> > > >
> > > > >> > > > So, Im fed up with all failures now.
> > > > >> > > >
> > > > >> > > > Can somebody please point me to a CF kit that actually 100%
> > > > >> > > > works with EMAX II.
> > > > >> > > >
> > > > >> > > > I would not like to buy a slim floppy and such, I'd rather
> > > > >> have a
> > > > >> > > > the CF kit installed in an external scsi case.
> > > > >> > > >
> > > > >> > > > Thx.
> > > > >> > > >
> > > > >> > > >
> > > > >> > > >
> > > > >> > > >
> > > > >> > > >
> > > > >> > > >
> > > > >> > > > ----------------------------------------------------------
> > > > >> > > >
> > > > >> > > >
> > > > >> > > >
> > > > >> > > > No virus found in this incoming message.
> > > > >> > > > Checked by AVG - www.avg.com
> > > > >> > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date:
> > > > >> > > 02/06/10 07:35:00
> > > > >> > > >
> > > > >> > > >
> > > > >> > > > [Non-text portions of this message have been removed]
> > > > >> > > >
> > > > >> > >
> > > > >> > >
> > > > >> > >
> > > > >> >
> > > > >> >
> > > > >> >
> > > > >> > [Non-text portions of this message have been removed]
> > > > >> >
> > > > >>
> > > > >>
> > > > >>
> > > > >
> > > > >
> > > > >
> > > > > [Non-text portions of this message have been removed]
> > > > >
> > > > >
> > > > >
> > > > > ------------------------------------
> > > > >
> > > > > Emax and Emax II User's Group Website
> > > > >
> > > > > http://www.silveriafamily.comYahoo! Groups Links
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > > > ----------------------------------------------------------
> > > >
> > > >
> > > >
> > > > No virus found in this incoming message.
> > > > Checked by AVG - www.avg.com
> > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: 02/06/10
> > > > 07:35:00
> > > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > ----------------------------------------------------------
> > >
> > >
> > >
> > > No virus found in this incoming message.
> > > Checked by AVG - www.avg.com
> > > Version: 8.5.435 / Virus Database: 271.1.1/2672 - Release Date: 02/06/10 19:35:00
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> >
> >
> >
> >
> >
> >
> > ----------------------------------------------------------
> >
> >
> >
> > No virus found in this incoming message.
> > Checked by AVG - www.avg.com
> > Version: 8.5.435 / Virus Database: 271.1.1/2672 - Release Date: 02/06/10 19:35:00
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>
>
>
>
> ----------------------------------------------------------
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.435 / Virus Database: 271.1.1/2673 - Release Date: 02/07/10 07:22:00
>
>
> [Non-text portions of this message have been removed]
>
------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.435 / Virus Database: 271.1.1/2673 - Release Date: 02/07/10 07:22:00
[Non-text portions of this message have been removed]2010-02-07 by jammie
have you any other samplers to try them with apart from the scsi to ide card being duff if you have another source to try on then you can rule that out
----- Original Message -----
From: drifter7508
To: emax@yahoogroups.com
Sent: Sunday, February 07, 2010 6:57 PM
Subject: [emax] Re: Point me to the places where to buy the right CF kit.
Yes Im the one with the CD-Rom you recom. to buy.
I have tried 2 different Quantum HD's in both my
external cases and they run perfect in both of them.
They also run perfect along with the internal HD at the same time.
Have also tried all things with the internal HD disabled.
I have OS 2.14 in my Turbo.
--- In emax@yahoogroups.com, "jammie" <jammie.emma@...> wrote:
>
> have you tried it with any other hd or cdrom
>
> are you the 1 who had problems with the scsi cdrom
>
> also have you tried disabling the internal hd to see if it works then some off the old scsi drives cuase problems when more than 1 on a system
> ----- Original Message -----
> From: drifter7508
> To: emax@yahoogroups.com
> Sent: Sunday, February 07, 2010 5:58 PM
> Subject: [emax] Re: Point me to the places where to buy the right CF kit.
>
>
>
> My Emax II Turbo has the latest OS installed.
>
> Internal HD is set to SCSI ID 1.
>
> --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> >
> > http://store.compuapps.com/idecf-reader.html
> >
> > i think the cf adapter is your problem
> >
> > heres a link to good one that works and they do them in black and white and they come in a 3.5" floppy housing
> >
> > also what is your emax id channel set to
> >
> > but like i said the idsc21-e is the card that works with mine the 1 you have is the updated 1 and does not have the term options like the idsc21-e
> >
> > the acard a7720u works with the os that ted has
> > ----- Original Message -----
> > From: drifter7508
> > To: emax@yahoogroups.com
> > Sent: Sunday, February 07, 2010 3:53 PM
> > Subject: [emax] Re: Point me to the places where to buy the right CF kit.
> >
> >
> >
> > There is an image of the IDE CF card reader in my earlier post.
> > (With all the other links an images)
> >
> > http://img62.imageshack.us/img62/1481/img0380p.jpg
> >
> > Just tried the settings you recom., sadly... no luck at all =(
> >
> > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> > >
> > > sorry pin 8 is the rom flash pin 9 is the termination this needs to be off for the self termination
> > > ----- Original Message -----
> > > From: drifter7508
> > > To: emax@yahoogroups.com
> > > Sent: Sunday, February 07, 2010 1:28 PM
> > > Subject: [emax] Re: Point me to the places where to buy the right CF kit.
> > >
> > >
> > >
> > >
> > >
> > > SCSI TO IDE BRIDGE:
> > > http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=330387956791&ssPageName=STRK:MEWNX:IT
> > >
> > > My settings at the moment:
> > > http://img59.imageshack.us/img59/9342/img0376x.jpg
> > >
> > > Jumper settings manual (I think):
> > > http://eab.abime.net/attachment.php?...8&d=1228279010
> > >
> > > --------------------------------------
> > >
> > > CF IDE READER CARD:
> > > http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=180328325603&ssPageName=STRK:MEWAX:IT
> > >
> > > My settings at the moment:
> > > http://img62.imageshack.us/img62/1481/img0380p.jpg
> > >
> > > ----------------------------------
> > >
> > > Settings for my Panasonic SCSI CD (that would not work either)
> > > http://img59.imageshack.us/img59/762/img0374v.jpg
> > >
> > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> > > >
> > > > what make and models did you buy first
> > > >
> > > > what jumper settings are you using as this makes a big difference
> > > >
> > > > what ide to cf card adapter are you using as some only support pio mode
> > > >
> > > > and the scsi to ide needs to be set to this mode to work
> > > >
> > > > the cf card that you got is fine they work
> > > >
> > > > can you post pictures of set up as i can tell you what jumpers and settings
> > > > to get it to work so can ted
> > > > ----- Original Message -----
> > > > From: "Brandt R. Gassman" <brandt@>
> > > > To: <emax@yahoogroups.com>
> > > > Sent: Saturday, February 06, 2010 11:41 PM
> > > > Subject: Re: [emax] Re: Point me to the places where to buy the right CF
> > > > kit.
> > > >
> > > >
> > > > > Ah, OK. I understand the situation now. Sorry if you've shared this
> > > > > information with the group already, but what external SCSI devices
> > > > > have you tried?
> > > > >
> > > > > The external SCSI > IDE > CF I'm using is the Spyrus MC-DISK2, which I
> > > > > purchased from scsiforsamplers.com in 2008 before they ran out. As
> > > > > noted, I successfully formatted two 1GB SanDisk CF cards with this
> > > > > unit (set to SCSI device #3). I've also used this device successfully
> > > > > with my Emulator III (set to device #5).
> > > > >
> > > > > Also, what type of Emax II do you have, and are you running the latest
> > > > > OS (2.14)? My Emax II was running 2.14 when I formatted the cards.
> > > > >
> > > > >
> > > > > On Feb 6, 2010, at 6:09 PM, drifter7508 wrote:
> > > > >
> > > > >> I have tried a bunch of different CF cards.
> > > > >> Most recently Sandisk 512 Mb oldschool
> > > > >> Dos fat 16 preform. cards. No luck.
> > > > >> The Emax wont even find the
> > > > >> units in the scsi connection. So I cant
> > > > >> format anything. :-(
> > > > >>
> > > > >> --- In emax@yahoogroups.com, "Brandt R. Gassman" <brandt@> wrote:
> > > > >> >
> > > > >> > What brand of CF cards are you using? How long are you allowing for
> > > > >> > the cards to format? I just successfully formatted two 1GB CF cards
> > > > >> > on an Emax II Turbo rack, but each card took about three hours to
> > > > >> > complete the "Verifying" process.
> > > > >> >
> > > > >> >
> > > > >> > On Feb 6, 2010, at 5:16 PM, drifter7508 wrote:
> > > > >> >
> > > > >> > > Isnt that exactly what I recently bought and
> > > > >> > > failed with? Not the same brand "Acard"
> > > > >> > > but exactly the same spec.
> > > > >> > >
> > > > >> > > I got 2 scsi cases allready. :)
> > > > >> > >
> > > > >> > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> > > > >> > > >
> > > > >> > > > you are going to find it hard now most kits have been sold buy a
> > > > >> > > acard 7720u scsi to ide adapter by an external scsi cdrom case
> > > > >> get a
> > > > >> > > ide to cf adapter try and get a atapi compliant so that it is hot
> > > > >> > > swappable
> > > > >> > > >
> > > > >> > > > and a 5.25"plate to 3.5" plate reducer for the 3.5" floppy size
> > > > >> > > ide to cf card drive this set up is going to cost you a bit so
> > > > >> shop
> > > > >> > > around on ebay for the scsi xternal cdrom case discard the cdrom
> > > > >> and
> > > > >> > > the scsi to ide interface
> > > > >> > > > ----- Original Message -----
> > > > >> > > > From: drifter7508
> > > > >> > > > To: emax@yahoogroups.com
> > > > >> > > > Sent: Saturday, February 06, 2010 9:20 PM
> > > > >> > > > Subject: [emax] Point me to the places where to buy the right CF
> > > > >> > > kit.
> > > > >> > > >
> > > > >> > > >
> > > > >> > > >
> > > > >> > > > So, Im fed up with all failures now.
> > > > >> > > >
> > > > >> > > > Can somebody please point me to a CF kit that actually 100%
> > > > >> > > > works with EMAX II.
> > > > >> > > >
> > > > >> > > > I would not like to buy a slim floppy and such, I'd rather
> > > > >> have a
> > > > >> > > > the CF kit installed in an external scsi case.
> > > > >> > > >
> > > > >> > > > Thx.
> > > > >> > > >
> > > > >> > > >
> > > > >> > > >
> > > > >> > > >
> > > > >> > > >
> > > > >> > > >
> > > > >> > > > ----------------------------------------------------------
> > > > >> > > >
> > > > >> > > >
> > > > >> > > >
> > > > >> > > > No virus found in this incoming message.
> > > > >> > > > Checked by AVG - www.avg.com
> > > > >> > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date:
> > > > >> > > 02/06/10 07:35:00
> > > > >> > > >
> > > > >> > > >
> > > > >> > > > [Non-text portions of this message have been removed]
> > > > >> > > >
> > > > >> > >
> > > > >> > >
> > > > >> > >
> > > > >> >
> > > > >> >
> > > > >> >
> > > > >> > [Non-text portions of this message have been removed]
> > > > >> >
> > > > >>
> > > > >>
> > > > >>
> > > > >
> > > > >
> > > > >
> > > > > [Non-text portions of this message have been removed]
> > > > >
> > > > >
> > > > >
> > > > > ------------------------------------
> > > > >
> > > > > Emax and Emax II User's Group Website
> > > > >
> > > > > http://www.silveriafamily.comYahoo! Groups Links
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > > > ----------------------------------------------------------
> > > >
> > > >
> > > >
> > > > No virus found in this incoming message.
> > > > Checked by AVG - www.avg.com
> > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: 02/06/10
> > > > 07:35:00
> > > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > ----------------------------------------------------------
> > >
> > >
> > >
> > > No virus found in this incoming message.
> > > Checked by AVG - www.avg.com
> > > Version: 8.5.435 / Virus Database: 271.1.1/2672 - Release Date: 02/06/10 19:35:00
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> >
> >
> >
> >
> >
> >
> > ----------------------------------------------------------
> >
> >
> >
> > No virus found in this incoming message.
> > Checked by AVG - www.avg.com
> > Version: 8.5.435 / Virus Database: 271.1.1/2672 - Release Date: 02/06/10 19:35:00
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>
>
>
>
> ----------------------------------------------------------
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.435 / Virus Database: 271.1.1/2673 - Release Date: 02/07/10 07:22:00
>
>
> [Non-text portions of this message have been removed]
>
------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.435 / Virus Database: 271.1.1/2673 - Release Date: 02/07/10 07:22:00
[Non-text portions of this message have been removed]2010-02-08 by tristanupton
The AEC-7720U is still available from ACARD's online store: http://www.acard.com.tw/english/fb01-batcar.jsp# /Tristan --- In emax@yahoogroups.com, "jammie" <jammie.emma@...> wrote:
> > i dont know what to surgest as that cdrom works on mine > > the r-idsc-e/r scsi to ide card that 1 dont work for my ensoniqs and i have not tried the emaxes with that card i know it works with a yam a3000 as i have 1 attached to mine > > the card i recomended was the iscd21-e but they have all gone scsifoursamplers brought them all for him to sell for the eps and asr10 samplers > > the only other cards are the acard7720u but they are like rocking horse pooh now > > the acard 7726 might work with a software revision ask ted as he sold me some 7722 cards that work but are only atapi you can use them with standard cdroms and atapi zip drives im making some atapi cf card adapters but am only at project stage at the moment > > i might have a spare 1 ill have a look at my inventory as most have been installed into samplers already > ----- Original Message ----- > From: drifter7508 > To: emax@yahoogroups.com > Sent: Sunday, February 07, 2010 6:57 PM > Subject: [emax] Re: Point me to the places where to buy the right CF kit. > > > > Yes Im the one with the CD-Rom you recom. to buy. > I have tried 2 different Quantum HD's in both my > external cases and they run perfect in both of them. > They also run perfect along with the internal HD at the same time. > Have also tried all things with the internal HD disabled. > > I have OS 2.14 in my Turbo. > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > have you tried it with any other hd or cdrom > > > > are you the 1 who had problems with the scsi cdrom > > > > also have you tried disabling the internal hd to see if it works then some off the old scsi drives cuase problems when more than 1 on a system > > ----- Original Message ----- > > From: drifter7508 > > To: emax@yahoogroups.com > > Sent: Sunday, February 07, 2010 5:58 PM > > Subject: [emax] Re: Point me to the places where to buy the right CF kit. > > > > > > > > My Emax II Turbo has the latest OS installed. > > > > Internal HD is set to SCSI ID 1. > > > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > > > http://store.compuapps.com/idecf-reader.html > > > > > > i think the cf adapter is your problem > > > > > > heres a link to good one that works and they do them in black and white and they come in a 3.5" floppy housing > > > > > > also what is your emax id channel set to > > > > > > but like i said the idsc21-e is the card that works with mine the 1 you have is the updated 1 and does not have the term options like the idsc21-e > > > > > > the acard a7720u works with the os that ted has > > > ----- Original Message ----- > > > From: drifter7508 > > > To: emax@yahoogroups.com > > > Sent: Sunday, February 07, 2010 3:53 PM > > > Subject: [emax] Re: Point me to the places where to buy the right CF kit. > > > > > > > > > > > > There is an image of the IDE CF card reader in my earlier post. > > > (With all the other links an images) > > > > > > http://img62.imageshack.us/img62/1481/img0380p.jpg > > > > > > Just tried the settings you recom., sadly... no luck at all =( > > > > > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > > > > > sorry pin 8 is the rom flash pin 9 is the termination this needs to be off for the self termination > > > > ----- Original Message ----- > > > > From: drifter7508 > > > > To: emax@yahoogroups.com > > > > Sent: Sunday, February 07, 2010 1:28 PM > > > > Subject: [emax] Re: Point me to the places where to buy the right CF kit. > > > > > > > > > > > > > > > > > > > > > > > > SCSI TO IDE BRIDGE: > > > > http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=330387956791&ssPageName=STRK:MEWNX:IT > > > > > > > > My settings at the moment: > > > > http://img59.imageshack.us/img59/9342/img0376x.jpg > > > > > > > > Jumper settings manual (I think): > > > > http://eab.abime.net/attachment.php?...8&d=1228279010 > > > > > > > > -------------------------------------- > > > > > > > > CF IDE READER CARD: > > > > http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=180328325603&ssPageName=STRK:MEWAX:IT > > > > > > > > My settings at the moment: > > > > http://img62.imageshack.us/img62/1481/img0380p.jpg > > > > > > > > ---------------------------------- > > > > > > > > Settings for my Panasonic SCSI CD (that would not work either) > > > > http://img59.imageshack.us/img59/762/img0374v.jpg > > > > > > > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > > > > > > > what make and models did you buy first > > > > > > > > > > what jumper settings are you using as this makes a big difference > > > > > > > > > > what ide to cf card adapter are you using as some only support pio mode > > > > > > > > > > and the scsi to ide needs to be set to this mode to work > > > > > > > > > > the cf card that you got is fine they work > > > > > > > > > > can you post pictures of set up as i can tell you what jumpers and settings > > > > > to get it to work so can ted > > > > > ----- Original Message ----- > > > > > From: "Brandt R. Gassman" <brandt@> > > > > > To: <emax@yahoogroups.com> > > > > > Sent: Saturday, February 06, 2010 11:41 PM > > > > > Subject: Re: [emax] Re: Point me to the places where to buy the right CF > > > > > kit. > > > > > > > > > > > > > > > > Ah, OK. I understand the situation now. Sorry if you've shared this > > > > > > information with the group already, but what external SCSI devices > > > > > > have you tried? > > > > > > > > > > > > The external SCSI > IDE > CF I'm using is the Spyrus MC-DISK2, which I > > > > > > purchased from scsiforsamplers.com in 2008 before they ran out. As > > > > > > noted, I successfully formatted two 1GB SanDisk CF cards with this > > > > > > unit (set to SCSI device #3). I've also used this device successfully > > > > > > with my Emulator III (set to device #5). > > > > > > > > > > > > Also, what type of Emax II do you have, and are you running the latest > > > > > > OS (2.14)? My Emax II was running 2.14 when I formatted the cards. > > > > > > > > > > > > > > > > > > On Feb 6, 2010, at 6:09 PM, drifter7508 wrote: > > > > > > > > > > > >> I have tried a bunch of different CF cards. > > > > > >> Most recently Sandisk 512 Mb oldschool > > > > > >> Dos fat 16 preform. cards. No luck. > > > > > >> The Emax wont even find the > > > > > >> units in the scsi connection. So I cant > > > > > >> format anything. :-( > > > > > >> > > > > > >> --- In emax@yahoogroups.com, "Brandt R. Gassman" <brandt@> wrote: > > > > > >> > > > > > > >> > What brand of CF cards are you using? How long are you allowing for > > > > > >> > the cards to format? I just successfully formatted two 1GB CF cards > > > > > >> > on an Emax II Turbo rack, but each card took about three hours to > > > > > >> > complete the "Verifying" process. > > > > > >> > > > > > > >> > > > > > > >> > On Feb 6, 2010, at 5:16 PM, drifter7508 wrote: > > > > > >> > > > > > > >> > > Isnt that exactly what I recently bought and > > > > > >> > > failed with? Not the same brand "Acard" > > > > > >> > > but exactly the same spec. > > > > > >> > > > > > > > >> > > I got 2 scsi cases allready. :) > > > > > >> > > > > > > > >> > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > > >> > > > > > > > > >> > > > you are going to find it hard now most kits have been sold buy a > > > > > >> > > acard 7720u scsi to ide adapter by an external scsi cdrom case > > > > > >> get a > > > > > >> > > ide to cf adapter try and get a atapi compliant so that it is hot > > > > > >> > > swappable > > > > > >> > > > > > > > > >> > > > and a 5.25"plate to 3.5" plate reducer for the 3.5" floppy size > > > > > >> > > ide to cf card drive this set up is going to cost you a bit so > > > > > >> shop > > > > > >> > > around on ebay for the scsi xternal cdrom case discard the cdrom > > > > > >> and > > > > > >> > > the scsi to ide interface > > > > > >> > > > ----- Original Message ----- > > > > > >> > > > From: drifter7508 > > > > > >> > > > To: emax@yahoogroups.com > > > > > >> > > > Sent: Saturday, February 06, 2010 9:20 PM > > > > > >> > > > Subject: [emax] Point me to the places where to buy the right CF > > > > > >> > > kit. > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > So, Im fed up with all failures now. > > > > > >> > > > > > > > > >> > > > Can somebody please point me to a CF kit that actually 100% > > > > > >> > > > works with EMAX II. > > > > > >> > > > > > > > > >> > > > I would not like to buy a slim floppy and such, I'd rather > > > > > >> have a > > > > > >> > > > the CF kit installed in an external scsi case. > > > > > >> > > > > > > > > >> > > > Thx. > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > ---------------------------------------------------------- > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > No virus found in this incoming message. > > > > > >> > > > Checked by AVG - www.avg.com > > > > > >> > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: > > > > > >> > > 02/06/10 07:35:00 > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > [Non-text portions of this message have been removed] > > > > > >> > > > > > > > > >> > > > > > > > >> > > > > > > > >> > > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> > [Non-text portions of this message have been removed] > > > > > >> > > > > > > >> > > > > > >> > > > > > >> > > > > > > > > > > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------ > > > > > > > > > > > > Emax and Emax II User's Group Website > > > > > > > > > > > > http://www.silveriafamily.comYahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > > > > > > > > > > > > > No virus found in this incoming message. > > > > > Checked by AVG - www.avg.com > > > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: 02/06/10 > > > > > 07:35:00 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > > > > > > > > > No virus found in this incoming message. > > > > Checked by AVG - www.avg.com > > > > Version: 8.5.435 / Virus Database: 271.1.1/2672 - Release Date: 02/06/10 19:35:00 > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > > > > > No virus found in this incoming message. > > > Checked by AVG - www.avg.com > > > Version: 8.5.435 / Virus Database: 271.1.1/2672 - Release Date: 02/06/10 19:35:00 > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > No virus found in this incoming message. > > Checked by AVG - www.avg.com > > Version: 8.5.435 / Virus Database: 271.1.1/2673 - Release Date: 02/07/10 07:22:00 > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > ------------------------------------------------------------------------------ > > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.435 / Virus Database: 271.1.1/2673 - Release Date: 02/07/10 07:22:00 > > > [Non-text portions of this message have been removed] >
2010-02-08 by drifter7508
250 USD! Thats overpriced. =P They must have pretty good margins on that price. http://www.pc-pitstop.com/scsi_ide_adapters/aec7720u.asp I sent these guys a mail. 125 USD. One store here in Sweden sold em for 68 USD each a few weeks agos but are out of stock at the moment. --- In emax@yahoogroups.com, "tristanupton" <tu@...> wrote:
> > The AEC-7720U is still available from ACARD's online store: > > http://www.acard.com.tw/english/fb01-batcar.jsp# > > /Tristan > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > i dont know what to surgest as that cdrom works on mine > > > > the r-idsc-e/r scsi to ide card that 1 dont work for my ensoniqs and i have not tried the emaxes with that card i know it works with a yam a3000 as i have 1 attached to mine > > > > the card i recomended was the iscd21-e but they have all gone scsifoursamplers brought them all for him to sell for the eps and asr10 samplers > > > > the only other cards are the acard7720u but they are like rocking horse pooh now > > > > the acard 7726 might work with a software revision ask ted as he sold me some 7722 cards that work but are only atapi you can use them with standard cdroms and atapi zip drives im making some atapi cf card adapters but am only at project stage at the moment > > > > i might have a spare 1 ill have a look at my inventory as most have been installed into samplers already > > ----- Original Message ----- > > From: drifter7508 > > To: emax@yahoogroups.com > > Sent: Sunday, February 07, 2010 6:57 PM > > Subject: [emax] Re: Point me to the places where to buy the right CF kit. > > > > > > > > Yes Im the one with the CD-Rom you recom. to buy. > > I have tried 2 different Quantum HD's in both my > > external cases and they run perfect in both of them. > > They also run perfect along with the internal HD at the same time. > > Have also tried all things with the internal HD disabled. > > > > I have OS 2.14 in my Turbo. > > > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > > > have you tried it with any other hd or cdrom > > > > > > are you the 1 who had problems with the scsi cdrom > > > > > > also have you tried disabling the internal hd to see if it works then some off the old scsi drives cuase problems when more than 1 on a system > > > ----- Original Message ----- > > > From: drifter7508 > > > To: emax@yahoogroups.com > > > Sent: Sunday, February 07, 2010 5:58 PM > > > Subject: [emax] Re: Point me to the places where to buy the right CF kit. > > > > > > > > > > > > My Emax II Turbo has the latest OS installed. > > > > > > Internal HD is set to SCSI ID 1. > > > > > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > > > > > http://store.compuapps.com/idecf-reader.html > > > > > > > > i think the cf adapter is your problem > > > > > > > > heres a link to good one that works and they do them in black and white and they come in a 3.5" floppy housing > > > > > > > > also what is your emax id channel set to > > > > > > > > but like i said the idsc21-e is the card that works with mine the 1 you have is the updated 1 and does not have the term options like the idsc21-e > > > > > > > > the acard a7720u works with the os that ted has > > > > ----- Original Message ----- > > > > From: drifter7508 > > > > To: emax@yahoogroups.com > > > > Sent: Sunday, February 07, 2010 3:53 PM > > > > Subject: [emax] Re: Point me to the places where to buy the right CF kit. > > > > > > > > > > > > > > > > There is an image of the IDE CF card reader in my earlier post. > > > > (With all the other links an images) > > > > > > > > http://img62.imageshack.us/img62/1481/img0380p.jpg > > > > > > > > Just tried the settings you recom., sadly... no luck at all =( > > > > > > > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > > > > > > > sorry pin 8 is the rom flash pin 9 is the termination this needs to be off for the self termination > > > > > ----- Original Message ----- > > > > > From: drifter7508 > > > > > To: emax@yahoogroups.com > > > > > Sent: Sunday, February 07, 2010 1:28 PM > > > > > Subject: [emax] Re: Point me to the places where to buy the right CF kit. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > SCSI TO IDE BRIDGE: > > > > > http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=330387956791&ssPageName=STRK:MEWNX:IT > > > > > > > > > > My settings at the moment: > > > > > http://img59.imageshack.us/img59/9342/img0376x.jpg > > > > > > > > > > Jumper settings manual (I think): > > > > > http://eab.abime.net/attachment.php?...8&d=1228279010 > > > > > > > > > > -------------------------------------- > > > > > > > > > > CF IDE READER CARD: > > > > > http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=180328325603&ssPageName=STRK:MEWAX:IT > > > > > > > > > > My settings at the moment: > > > > > http://img62.imageshack.us/img62/1481/img0380p.jpg > > > > > > > > > > ---------------------------------- > > > > > > > > > > Settings for my Panasonic SCSI CD (that would not work either) > > > > > http://img59.imageshack.us/img59/762/img0374v.jpg > > > > > > > > > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > > > > > > > > > what make and models did you buy first > > > > > > > > > > > > what jumper settings are you using as this makes a big difference > > > > > > > > > > > > what ide to cf card adapter are you using as some only support pio mode > > > > > > > > > > > > and the scsi to ide needs to be set to this mode to work > > > > > > > > > > > > the cf card that you got is fine they work > > > > > > > > > > > > can you post pictures of set up as i can tell you what jumpers and settings > > > > > > to get it to work so can ted > > > > > > ----- Original Message ----- > > > > > > From: "Brandt R. Gassman" <brandt@> > > > > > > To: <emax@yahoogroups.com> > > > > > > Sent: Saturday, February 06, 2010 11:41 PM > > > > > > Subject: Re: [emax] Re: Point me to the places where to buy the right CF > > > > > > kit. > > > > > > > > > > > > > > > > > > > Ah, OK. I understand the situation now. Sorry if you've shared this > > > > > > > information with the group already, but what external SCSI devices > > > > > > > have you tried? > > > > > > > > > > > > > > The external SCSI > IDE > CF I'm using is the Spyrus MC-DISK2, which I > > > > > > > purchased from scsiforsamplers.com in 2008 before they ran out. As > > > > > > > noted, I successfully formatted two 1GB SanDisk CF cards with this > > > > > > > unit (set to SCSI device #3). I've also used this device successfully > > > > > > > with my Emulator III (set to device #5). > > > > > > > > > > > > > > Also, what type of Emax II do you have, and are you running the latest > > > > > > > OS (2.14)? My Emax II was running 2.14 when I formatted the cards. > > > > > > > > > > > > > > > > > > > > > On Feb 6, 2010, at 6:09 PM, drifter7508 wrote: > > > > > > > > > > > > > >> I have tried a bunch of different CF cards. > > > > > > >> Most recently Sandisk 512 Mb oldschool > > > > > > >> Dos fat 16 preform. cards. No luck. > > > > > > >> The Emax wont even find the > > > > > > >> units in the scsi connection. So I cant > > > > > > >> format anything. :-( > > > > > > >> > > > > > > >> --- In emax@yahoogroups.com, "Brandt R. Gassman" <brandt@> wrote: > > > > > > >> > > > > > > > >> > What brand of CF cards are you using? How long are you allowing for > > > > > > >> > the cards to format? I just successfully formatted two 1GB CF cards > > > > > > >> > on an Emax II Turbo rack, but each card took about three hours to > > > > > > >> > complete the "Verifying" process. > > > > > > >> > > > > > > > >> > > > > > > > >> > On Feb 6, 2010, at 5:16 PM, drifter7508 wrote: > > > > > > >> > > > > > > > >> > > Isnt that exactly what I recently bought and > > > > > > >> > > failed with? Not the same brand "Acard" > > > > > > >> > > but exactly the same spec. > > > > > > >> > > > > > > > > >> > > I got 2 scsi cases allready. :) > > > > > > >> > > > > > > > > >> > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > > > >> > > > > > > > > > >> > > > you are going to find it hard now most kits have been sold buy a > > > > > > >> > > acard 7720u scsi to ide adapter by an external scsi cdrom case > > > > > > >> get a > > > > > > >> > > ide to cf adapter try and get a atapi compliant so that it is hot > > > > > > >> > > swappable > > > > > > >> > > > > > > > > > >> > > > and a 5.25"plate to 3.5" plate reducer for the 3.5" floppy size > > > > > > >> > > ide to cf card drive this set up is going to cost you a bit so > > > > > > >> shop > > > > > > >> > > around on ebay for the scsi xternal cdrom case discard the cdrom > > > > > > >> and > > > > > > >> > > the scsi to ide interface > > > > > > >> > > > ----- Original Message ----- > > > > > > >> > > > From: drifter7508 > > > > > > >> > > > To: emax@yahoogroups.com > > > > > > >> > > > Sent: Saturday, February 06, 2010 9:20 PM > > > > > > >> > > > Subject: [emax] Point me to the places where to buy the right CF > > > > > > >> > > kit. > > > > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > So, Im fed up with all failures now. > > > > > > >> > > > > > > > > > >> > > > Can somebody please point me to a CF kit that actually 100% > > > > > > >> > > > works with EMAX II. > > > > > > >> > > > > > > > > > >> > > > I would not like to buy a slim floppy and such, I'd rather > > > > > > >> have a > > > > > > >> > > > the CF kit installed in an external scsi case. > > > > > > >> > > > > > > > > > >> > > > Thx. > > > > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > ---------------------------------------------------------- > > > > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > No virus found in this incoming message. > > > > > > >> > > > Checked by AVG - www.avg.com > > > > > > >> > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: > > > > > > >> > > 02/06/10 07:35:00 > > > > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > [Non-text portions of this message have been removed] > > > > > > >> > > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > > > > > >> > > > > > > > >> > > > > > > > >> > [Non-text portions of this message have been removed] > > > > > > >> > > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > > > > > > > > > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------ > > > > > > > > > > > > > > Emax and Emax II User's Group Website > > > > > > > > > > > > > > http://www.silveriafamily.comYahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > > > > > > > > > > > > > > > > > No virus found in this incoming message. > > > > > > Checked by AVG - www.avg.com > > > > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: 02/06/10 > > > > > > 07:35:00 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > > > > > > > > > > > > > No virus found in this incoming message. > > > > > Checked by AVG - www.avg.com > > > > > Version: 8.5.435 / Virus Database: 271.1.1/2672 - Release Date: 02/06/10 19:35:00 > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > > > > > > > > > No virus found in this incoming message. > > > > Checked by AVG - www.avg.com > > > > Version: 8.5.435 / Virus Database: 271.1.1/2672 - Release Date: 02/06/10 19:35:00 > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > > > > > No virus found in this incoming message. > > > Checked by AVG - www.avg.com > > > Version: 8.5.435 / Virus Database: 271.1.1/2673 - Release Date: 02/07/10 07:22:00 > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > ------------------------------------------------------------------------------ > > > > > > > > No virus found in this incoming message. > > Checked by AVG - www.avg.com > > Version: 8.5.435 / Virus Database: 271.1.1/2673 - Release Date: 02/07/10 07:22:00 > > > > > > [Non-text portions of this message have been removed] > > >
2010-02-08 by drifter7508
http://www.span.com/product_info.php?products_id=1058 They have it in sock for around 125 USD. Before I hit the buy button... Is this the prefered adapter to buy? --- In emax@yahoogroups.com, "drifter7508" <drifter7508@...> wrote:
> > 250 USD! Thats overpriced. =P They must have pretty good > margins on that price. > > http://www.pc-pitstop.com/scsi_ide_adapters/aec7720u.asp > I sent these guys a mail. 125 USD. > > One store here in Sweden sold em for 68 USD each > a few weeks agos but are out of stock at the moment. > > > > > --- In emax@yahoogroups.com, "tristanupton" <tu@> wrote: > > > > The AEC-7720U is still available from ACARD's online store: > > > > http://www.acard.com.tw/english/fb01-batcar.jsp# > > > > /Tristan > > > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > > > i dont know what to surgest as that cdrom works on mine > > > > > > the r-idsc-e/r scsi to ide card that 1 dont work for my ensoniqs and i have not tried the emaxes with that card i know it works with a yam a3000 as i have 1 attached to mine > > > > > > the card i recomended was the iscd21-e but they have all gone scsifoursamplers brought them all for him to sell for the eps and asr10 samplers > > > > > > the only other cards are the acard7720u but they are like rocking horse pooh now > > > > > > the acard 7726 might work with a software revision ask ted as he sold me some 7722 cards that work but are only atapi you can use them with standard cdroms and atapi zip drives im making some atapi cf card adapters but am only at project stage at the moment > > > > > > i might have a spare 1 ill have a look at my inventory as most have been installed into samplers already > > > ----- Original Message ----- > > > From: drifter7508 > > > To: emax@yahoogroups.com > > > Sent: Sunday, February 07, 2010 6:57 PM > > > Subject: [emax] Re: Point me to the places where to buy the right CF kit. > > > > > > > > > > > > Yes Im the one with the CD-Rom you recom. to buy. > > > I have tried 2 different Quantum HD's in both my > > > external cases and they run perfect in both of them. > > > They also run perfect along with the internal HD at the same time. > > > Have also tried all things with the internal HD disabled. > > > > > > I have OS 2.14 in my Turbo. > > > > > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > > > > > have you tried it with any other hd or cdrom > > > > > > > > are you the 1 who had problems with the scsi cdrom > > > > > > > > also have you tried disabling the internal hd to see if it works then some off the old scsi drives cuase problems when more than 1 on a system > > > > ----- Original Message ----- > > > > From: drifter7508 > > > > To: emax@yahoogroups.com > > > > Sent: Sunday, February 07, 2010 5:58 PM > > > > Subject: [emax] Re: Point me to the places where to buy the right CF kit. > > > > > > > > > > > > > > > > My Emax II Turbo has the latest OS installed. > > > > > > > > Internal HD is set to SCSI ID 1. > > > > > > > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > > > > > > > http://store.compuapps.com/idecf-reader.html > > > > > > > > > > i think the cf adapter is your problem > > > > > > > > > > heres a link to good one that works and they do them in black and white and they come in a 3.5" floppy housing > > > > > > > > > > also what is your emax id channel set to > > > > > > > > > > but like i said the idsc21-e is the card that works with mine the 1 you have is the updated 1 and does not have the term options like the idsc21-e > > > > > > > > > > the acard a7720u works with the os that ted has > > > > > ----- Original Message ----- > > > > > From: drifter7508 > > > > > To: emax@yahoogroups.com > > > > > Sent: Sunday, February 07, 2010 3:53 PM > > > > > Subject: [emax] Re: Point me to the places where to buy the right CF kit. > > > > > > > > > > > > > > > > > > > > There is an image of the IDE CF card reader in my earlier post. > > > > > (With all the other links an images) > > > > > > > > > > http://img62.imageshack.us/img62/1481/img0380p.jpg > > > > > > > > > > Just tried the settings you recom., sadly... no luck at all =( > > > > > > > > > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > > > > > > > > > sorry pin 8 is the rom flash pin 9 is the termination this needs to be off for the self termination > > > > > > ----- Original Message ----- > > > > > > From: drifter7508 > > > > > > To: emax@yahoogroups.com > > > > > > Sent: Sunday, February 07, 2010 1:28 PM > > > > > > Subject: [emax] Re: Point me to the places where to buy the right CF kit. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > SCSI TO IDE BRIDGE: > > > > > > http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=330387956791&ssPageName=STRK:MEWNX:IT > > > > > > > > > > > > My settings at the moment: > > > > > > http://img59.imageshack.us/img59/9342/img0376x.jpg > > > > > > > > > > > > Jumper settings manual (I think): > > > > > > http://eab.abime.net/attachment.php?...8&d=1228279010 > > > > > > > > > > > > -------------------------------------- > > > > > > > > > > > > CF IDE READER CARD: > > > > > > http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=180328325603&ssPageName=STRK:MEWAX:IT > > > > > > > > > > > > My settings at the moment: > > > > > > http://img62.imageshack.us/img62/1481/img0380p.jpg > > > > > > > > > > > > ---------------------------------- > > > > > > > > > > > > Settings for my Panasonic SCSI CD (that would not work either) > > > > > > http://img59.imageshack.us/img59/762/img0374v.jpg > > > > > > > > > > > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > > > > > > > > > > > what make and models did you buy first > > > > > > > > > > > > > > what jumper settings are you using as this makes a big difference > > > > > > > > > > > > > > what ide to cf card adapter are you using as some only support pio mode > > > > > > > > > > > > > > and the scsi to ide needs to be set to this mode to work > > > > > > > > > > > > > > the cf card that you got is fine they work > > > > > > > > > > > > > > can you post pictures of set up as i can tell you what jumpers and settings > > > > > > > to get it to work so can ted > > > > > > > ----- Original Message ----- > > > > > > > From: "Brandt R. Gassman" <brandt@> > > > > > > > To: <emax@yahoogroups.com> > > > > > > > Sent: Saturday, February 06, 2010 11:41 PM > > > > > > > Subject: Re: [emax] Re: Point me to the places where to buy the right CF > > > > > > > kit. > > > > > > > > > > > > > > > > > > > > > > Ah, OK. I understand the situation now. Sorry if you've shared this > > > > > > > > information with the group already, but what external SCSI devices > > > > > > > > have you tried? > > > > > > > > > > > > > > > > The external SCSI > IDE > CF I'm using is the Spyrus MC-DISK2, which I > > > > > > > > purchased from scsiforsamplers.com in 2008 before they ran out. As > > > > > > > > noted, I successfully formatted two 1GB SanDisk CF cards with this > > > > > > > > unit (set to SCSI device #3). I've also used this device successfully > > > > > > > > with my Emulator III (set to device #5). > > > > > > > > > > > > > > > > Also, what type of Emax II do you have, and are you running the latest > > > > > > > > OS (2.14)? My Emax II was running 2.14 when I formatted the cards. > > > > > > > > > > > > > > > > > > > > > > > > On Feb 6, 2010, at 6:09 PM, drifter7508 wrote: > > > > > > > > > > > > > > > >> I have tried a bunch of different CF cards. > > > > > > > >> Most recently Sandisk 512 Mb oldschool > > > > > > > >> Dos fat 16 preform. cards. No luck. > > > > > > > >> The Emax wont even find the > > > > > > > >> units in the scsi connection. So I cant > > > > > > > >> format anything. :-( > > > > > > > >> > > > > > > > >> --- In emax@yahoogroups.com, "Brandt R. Gassman" <brandt@> wrote: > > > > > > > >> > > > > > > > > >> > What brand of CF cards are you using? How long are you allowing for > > > > > > > >> > the cards to format? I just successfully formatted two 1GB CF cards > > > > > > > >> > on an Emax II Turbo rack, but each card took about three hours to > > > > > > > >> > complete the "Verifying" process. > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > On Feb 6, 2010, at 5:16 PM, drifter7508 wrote: > > > > > > > >> > > > > > > > > >> > > Isnt that exactly what I recently bought and > > > > > > > >> > > failed with? Not the same brand "Acard" > > > > > > > >> > > but exactly the same spec. > > > > > > > >> > > > > > > > > > >> > > I got 2 scsi cases allready. :) > > > > > > > >> > > > > > > > > > >> > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > > > > >> > > > > > > > > > > >> > > > you are going to find it hard now most kits have been sold buy a > > > > > > > >> > > acard 7720u scsi to ide adapter by an external scsi cdrom case > > > > > > > >> get a > > > > > > > >> > > ide to cf adapter try and get a atapi compliant so that it is hot > > > > > > > >> > > swappable > > > > > > > >> > > > > > > > > > > >> > > > and a 5.25"plate to 3.5" plate reducer for the 3.5" floppy size > > > > > > > >> > > ide to cf card drive this set up is going to cost you a bit so > > > > > > > >> shop > > > > > > > >> > > around on ebay for the scsi xternal cdrom case discard the cdrom > > > > > > > >> and > > > > > > > >> > > the scsi to ide interface > > > > > > > >> > > > ----- Original Message ----- > > > > > > > >> > > > From: drifter7508 > > > > > > > >> > > > To: emax@yahoogroups.com > > > > > > > >> > > > Sent: Saturday, February 06, 2010 9:20 PM > > > > > > > >> > > > Subject: [emax] Point me to the places where to buy the right CF > > > > > > > >> > > kit. > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > > >> > > > So, Im fed up with all failures now. > > > > > > > >> > > > > > > > > > > >> > > > Can somebody please point me to a CF kit that actually 100% > > > > > > > >> > > > works with EMAX II. > > > > > > > >> > > > > > > > > > > >> > > > I would not like to buy a slim floppy and such, I'd rather > > > > > > > >> have a > > > > > > > >> > > > the CF kit installed in an external scsi case. > > > > > > > >> > > > > > > > > > > >> > > > Thx. > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > > >> > > > ---------------------------------------------------------- > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > > >> > > > No virus found in this incoming message. > > > > > > > >> > > > Checked by AVG - www.avg.com > > > > > > > >> > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: > > > > > > > >> > > 02/06/10 07:35:00 > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > > >> > > > [Non-text portions of this message have been removed] > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > [Non-text portions of this message have been removed] > > > > > > > >> > > > > > > > > >> > > > > > > > >> > > > > > > > >> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------ > > > > > > > > > > > > > > > > Emax and Emax II User's Group Website > > > > > > > > > > > > > > > > http://www.silveriafamily.comYahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > > > > > > > > > > > > > > > > > > > > > No virus found in this incoming message. > > > > > > > Checked by AVG - www.avg.com > > > > > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: 02/06/10 > > > > > > > 07:35:00 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > > > > > > > > > > > > > > > > > No virus found in this incoming message. > > > > > > Checked by AVG - www.avg.com > > > > > > Version: 8.5.435 / Virus Database: 271.1.1/2672 - Release Date: 02/06/10 19:35:00 > > > > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > > > > > > > > > > > > > No virus found in this incoming message. > > > > > Checked by AVG - www.avg.com > > > > > Version: 8.5.435 / Virus Database: 271.1.1/2672 - Release Date: 02/06/10 19:35:00 > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > > > > > > > > > No virus found in this incoming message. > > > > Checked by AVG - www.avg.com > > > > Version: 8.5.435 / Virus Database: 271.1.1/2673 - Release Date: 02/07/10 07:22:00 > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------------------------------ > > > > > > > > > > > > No virus found in this incoming message. > > > Checked by AVG - www.avg.com > > > Version: 8.5.435 / Virus Database: 271.1.1/2673 - Release Date: 02/07/10 07:22:00 > > > > > > > > > [Non-text portions of this message have been removed] > > > > > >
2010-02-08 by drifter7508
http://www.ggsdata.se/PC/aec7720uw.html Would this cards work with a 50 Pin adapter? The selles says it compatible with ULTRA SCSI. --- In emax@yahoogroups.com, "jammie" <jammie.emma@...> wrote:
> > i dont know what to surgest as that cdrom works on mine > > the r-idsc-e/r scsi to ide card that 1 dont work for my ensoniqs and i have not tried the emaxes with that card i know it works with a yam a3000 as i have 1 attached to mine > > the card i recomended was the iscd21-e but they have all gone scsifoursamplers brought them all for him to sell for the eps and asr10 samplers > > the only other cards are the acard7720u but they are like rocking horse pooh now > > the acard 7726 might work with a software revision ask ted as he sold me some 7722 cards that work but are only atapi you can use them with standard cdroms and atapi zip drives im making some atapi cf card adapters but am only at project stage at the moment > > i might have a spare 1 ill have a look at my inventory as most have been installed into samplers already > ----- Original Message ----- > From: drifter7508 > To: emax@yahoogroups.com > Sent: Sunday, February 07, 2010 6:57 PM > Subject: [emax] Re: Point me to the places where to buy the right CF kit. > > > > Yes Im the one with the CD-Rom you recom. to buy. > I have tried 2 different Quantum HD's in both my > external cases and they run perfect in both of them. > They also run perfect along with the internal HD at the same time. > Have also tried all things with the internal HD disabled. > > I have OS 2.14 in my Turbo. > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > have you tried it with any other hd or cdrom > > > > are you the 1 who had problems with the scsi cdrom > > > > also have you tried disabling the internal hd to see if it works then some off the old scsi drives cuase problems when more than 1 on a system > > ----- Original Message ----- > > From: drifter7508 > > To: emax@yahoogroups.com > > Sent: Sunday, February 07, 2010 5:58 PM > > Subject: [emax] Re: Point me to the places where to buy the right CF kit. > > > > > > > > My Emax II Turbo has the latest OS installed. > > > > Internal HD is set to SCSI ID 1. > > > > --- In emax@...m, "jammie" <jammie.emma@> wrote: > > > > > > http://store.compuapps.com/idecf-reader.html > > > > > > i think the cf adapter is your problem > > > > > > heres a link to good one that works and they do them in black and white and they come in a 3.5" floppy housing > > > > > > also what is your emax id channel set to > > > > > > but like i said the idsc21-e is the card that works with mine the 1 you have is the updated 1 and does not have the term options like the idsc21-e > > > > > > the acard a7720u works with the os that ted has > > > ----- Original Message ----- > > > From: drifter7508 > > > To: emax@yahoogroups.com > > > Sent: Sunday, February 07, 2010 3:53 PM > > > Subject: [emax] Re: Point me to the places where to buy the right CF kit. > > > > > > > > > > > > There is an image of the IDE CF card reader in my earlier post. > > > (With all the other links an images) > > > > > > http://img62.imageshack.us/img62/1481/img0380p.jpg > > > > > > Just tried the settings you recom., sadly... no luck at all =( > > > > > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > > > > > sorry pin 8 is the rom flash pin 9 is the termination this needs to be off for the self termination > > > > ----- Original Message ----- > > > > From: drifter7508 > > > > To: emax@yahoogroups.com > > > > Sent: Sunday, February 07, 2010 1:28 PM > > > > Subject: [emax] Re: Point me to the places where to buy the right CF kit. > > > > > > > > > > > > > > > > > > > > > > > > SCSI TO IDE BRIDGE: > > > > http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=330387956791&ssPageName=STRK:MEWNX:IT > > > > > > > > My settings at the moment: > > > > http://img59.imageshack.us/img59/9342/img0376x.jpg > > > > > > > > Jumper settings manual (I think): > > > > http://eab.abime.net/attachment.php?...8&d=1228279010 > > > > > > > > -------------------------------------- > > > > > > > > CF IDE READER CARD: > > > > http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=180328325603&ssPageName=STRK:MEWAX:IT > > > > > > > > My settings at the moment: > > > > http://img62.imageshack.us/img62/1481/img0380p.jpg > > > > > > > > ---------------------------------- > > > > > > > > Settings for my Panasonic SCSI CD (that would not work either) > > > > http://img59.imageshack.us/img59/762/img0374v.jpg > > > > > > > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > > > > > > > what make and models did you buy first > > > > > > > > > > what jumper settings are you using as this makes a big difference > > > > > > > > > > what ide to cf card adapter are you using as some only support pio mode > > > > > > > > > > and the scsi to ide needs to be set to this mode to work > > > > > > > > > > the cf card that you got is fine they work > > > > > > > > > > can you post pictures of set up as i can tell you what jumpers and settings > > > > > to get it to work so can ted > > > > > ----- Original Message ----- > > > > > From: "Brandt R. Gassman" <brandt@> > > > > > To: <emax@yahoogroups.com> > > > > > Sent: Saturday, February 06, 2010 11:41 PM > > > > > Subject: Re: [emax] Re: Point me to the places where to buy the right CF > > > > > kit. > > > > > > > > > > > > > > > > Ah, OK. I understand the situation now. Sorry if you've shared this > > > > > > information with the group already, but what external SCSI devices > > > > > > have you tried? > > > > > > > > > > > > The external SCSI > IDE > CF I'm using is the Spyrus MC-DISK2, which I > > > > > > purchased from scsiforsamplers.com in 2008 before they ran out. As > > > > > > noted, I successfully formatted two 1GB SanDisk CF cards with this > > > > > > unit (set to SCSI device #3). I've also used this device successfully > > > > > > with my Emulator III (set to device #5). > > > > > > > > > > > > Also, what type of Emax II do you have, and are you running the latest > > > > > > OS (2.14)? My Emax II was running 2.14 when I formatted the cards. > > > > > > > > > > > > > > > > > > On Feb 6, 2010, at 6:09 PM, drifter7508 wrote: > > > > > > > > > > > >> I have tried a bunch of different CF cards. > > > > > >> Most recently Sandisk 512 Mb oldschool > > > > > >> Dos fat 16 preform. cards. No luck. > > > > > >> The Emax wont even find the > > > > > >> units in the scsi connection. So I cant > > > > > >> format anything. :-( > > > > > >> > > > > > >> --- In emax@yahoogroups.com, "Brandt R. Gassman" <brandt@> wrote: > > > > > >> > > > > > > >> > What brand of CF cards are you using? How long are you allowing for > > > > > >> > the cards to format? I just successfully formatted two 1GB CF cards > > > > > >> > on an Emax II Turbo rack, but each card took about three hours to > > > > > >> > complete the "Verifying" process. > > > > > >> > > > > > > >> > > > > > > >> > On Feb 6, 2010, at 5:16 PM, drifter7508 wrote: > > > > > >> > > > > > > >> > > Isnt that exactly what I recently bought and > > > > > >> > > failed with? Not the same brand "Acard" > > > > > >> > > but exactly the same spec. > > > > > >> > > > > > > > >> > > I got 2 scsi cases allready. :) > > > > > >> > > > > > > > >> > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > > >> > > > > > > > > >> > > > you are going to find it hard now most kits have been sold buy a > > > > > >> > > acard 7720u scsi to ide adapter by an external scsi cdrom case > > > > > >> get a > > > > > >> > > ide to cf adapter try and get a atapi compliant so that it is hot > > > > > >> > > swappable > > > > > >> > > > > > > > > >> > > > and a 5.25"plate to 3.5" plate reducer for the 3.5" floppy size > > > > > >> > > ide to cf card drive this set up is going to cost you a bit so > > > > > >> shop > > > > > >> > > around on ebay for the scsi xternal cdrom case discard the cdrom > > > > > >> and > > > > > >> > > the scsi to ide interface > > > > > >> > > > ----- Original Message ----- > > > > > >> > > > From: drifter7508 > > > > > >> > > > To: emax@yahoogroups.com > > > > > >> > > > Sent: Saturday, February 06, 2010 9:20 PM > > > > > >> > > > Subject: [emax] Point me to the places where to buy the right CF > > > > > >> > > kit. > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > So, Im fed up with all failures now. > > > > > >> > > > > > > > > >> > > > Can somebody please point me to a CF kit that actually 100% > > > > > >> > > > works with EMAX II. > > > > > >> > > > > > > > > >> > > > I would not like to buy a slim floppy and such, I'd rather > > > > > >> have a > > > > > >> > > > the CF kit installed in an external scsi case. > > > > > >> > > > > > > > > >> > > > Thx. > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > ---------------------------------------------------------- > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > No virus found in this incoming message. > > > > > >> > > > Checked by AVG - www.avg.com > > > > > >> > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: > > > > > >> > > 02/06/10 07:35:00 > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > [Non-text portions of this message have been removed] > > > > > >> > > > > > > > > >> > > > > > > > >> > > > > > > > >> > > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> > [Non-text portions of this message have been removed] > > > > > >> > > > > > > >> > > > > > >> > > > > > >> > > > > > > > > > > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------ > > > > > > > > > > > > Emax and Emax II User's Group Website > > > > > > > > > > > > http://www.silveriafamily.comYahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > > > > > > > > > > > > > No virus found in this incoming message. > > > > > Checked by AVG - www.avg.com > > > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: 02/06/10 > > > > > 07:35:00 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > > > > > > > > > No virus found in this incoming message. > > > > Checked by AVG - www.avg.com > > > > Version: 8.5.435 / Virus Database: 271.1.1/2672 - Release Date: 02/06/10 19:35:00 > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > > > > > No virus found in this incoming message. > > > Checked by AVG - www.avg.com > > > Version: 8.5.435 / Virus Database: 271.1.1/2672 - Release Date: 02/06/10 19:35:00 > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > No virus found in this incoming message. > > Checked by AVG - www.avg.com > > Version: 8.5.435 / Virus Database: 271.1.1/2673 - Release Date: 02/07/10 07:22:00 > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > ------------------------------------------------------------------------------ > > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.435 / Virus Database: 271.1.1/2673 - Release Date: 02/07/10 07:22:00 > > > [Non-text portions of this message have been removed] >
2010-02-08 by jammie
no dopnt use that 1 dont work with out down grading it i have a spare 1 you can have for £50 plus postage
----- Original Message -----
From: drifter7508
To: emax@yahoogroups.com
Sent: Monday, February 08, 2010 11:06 AM
Subject: [emax] Re: Point me to the places where to buy the right CF kit.
http://www.ggsdata.se/PC/aec7720uw.html
Would this cards work with a 50 Pin adapter?
The selles says it compatible with ULTRA SCSI.
--- In emax@yahoogroups.com, "jammie" <jammie.emma@...> wrote:
>
> i dont know what to surgest as that cdrom works on mine
>
> the r-idsc-e/r scsi to ide card that 1 dont work for my ensoniqs and i have not tried the emaxes with that card i know it works with a yam a3000 as i have 1 attached to mine
>
> the card i recomended was the iscd21-e but they have all gone scsifoursamplers brought them all for him to sell for the eps and asr10 samplers
>
> the only other cards are the acard7720u but they are like rocking horse pooh now
>
> the acard 7726 might work with a software revision ask ted as he sold me some 7722 cards that work but are only atapi you can use them with standard cdroms and atapi zip drives im making some atapi cf card adapters but am only at project stage at the moment
>
> i might have a spare 1 ill have a look at my inventory as most have been installed into samplers already
> ----- Original Message -----
> From: drifter7508
> To: emax@yahoogroups.com
> Sent: Sunday, February 07, 2010 6:57 PM
> Subject: [emax] Re: Point me to the places where to buy the right CF kit.
>
>
>
> Yes Im the one with the CD-Rom you recom. to buy.
> I have tried 2 different Quantum HD's in both my
> external cases and they run perfect in both of them.
> They also run perfect along with the internal HD at the same time.
> Have also tried all things with the internal HD disabled.
>
> I have OS 2.14 in my Turbo.
>
> --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> >
> > have you tried it with any other hd or cdrom
> >
> > are you the 1 who had problems with the scsi cdrom
> >
> > also have you tried disabling the internal hd to see if it works then some off the old scsi drives cuase problems when more than 1 on a system
> > ----- Original Message -----
> > From: drifter7508
> > To: emax@yahoogroups.com
> > Sent: Sunday, February 07, 2010 5:58 PM
> > Subject: [emax] Re: Point me to the places where to buy the right CF kit.
> >
> >
> >
> > My Emax II Turbo has the latest OS installed.
> >
> > Internal HD is set to SCSI ID 1.
> >
> > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> > >
> > > http://store.compuapps.com/idecf-reader.html
> > >
> > > i think the cf adapter is your problem
> > >
> > > heres a link to good one that works and they do them in black and white and they come in a 3.5" floppy housing
> > >
> > > also what is your emax id channel set to
> > >
> > > but like i said the idsc21-e is the card that works with mine the 1 you have is the updated 1 and does not have the term options like the idsc21-e
> > >
> > > the acard a7720u works with the os that ted has
> > > ----- Original Message -----
> > > From: drifter7508
> > > To: emax@yahoogroups.com
> > > Sent: Sunday, February 07, 2010 3:53 PM
> > > Subject: [emax] Re: Point me to the places where to buy the right CF kit.
> > >
> > >
> > >
> > > There is an image of the IDE CF card reader in my earlier post.
> > > (With all the other links an images)
> > >
> > > http://img62.imageshack.us/img62/1481/img0380p.jpg
> > >
> > > Just tried the settings you recom., sadly... no luck at all =(
> > >
> > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> > > >
> > > > sorry pin 8 is the rom flash pin 9 is the termination this needs to be off for the self termination
> > > > ----- Original Message -----
> > > > From: drifter7508
> > > > To: emax@yahoogroups.com
> > > > Sent: Sunday, February 07, 2010 1:28 PM
> > > > Subject: [emax] Re: Point me to the places where to buy the right CF kit.
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > SCSI TO IDE BRIDGE:
> > > > http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=330387956791&ssPageName=STRK:MEWNX:IT
> > > >
> > > > My settings at the moment:
> > > > http://img59.imageshack.us/img59/9342/img0376x.jpg
> > > >
> > > > Jumper settings manual (I think):
> > > > http://eab.abime.net/attachment.php?...8&d=1228279010
> > > >
> > > > --------------------------------------
> > > >
> > > > CF IDE READER CARD:
> > > > http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=180328325603&ssPageName=STRK:MEWAX:IT
> > > >
> > > > My settings at the moment:
> > > > http://img62.imageshack.us/img62/1481/img0380p.jpg
> > > >
> > > > ----------------------------------
> > > >
> > > > Settings for my Panasonic SCSI CD (that would not work either)
> > > > http://img59.imageshack.us/img59/762/img0374v.jpg
> > > >
> > > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> > > > >
> > > > > what make and models did you buy first
> > > > >
> > > > > what jumper settings are you using as this makes a big difference
> > > > >
> > > > > what ide to cf card adapter are you using as some only support pio mode
> > > > >
> > > > > and the scsi to ide needs to be set to this mode to work
> > > > >
> > > > > the cf card that you got is fine they work
> > > > >
> > > > > can you post pictures of set up as i can tell you what jumpers and settings
> > > > > to get it to work so can ted
> > > > > ----- Original Message -----
> > > > > From: "Brandt R. Gassman" <brandt@>
> > > > > To: <emax@yahoogroups.com>
> > > > > Sent: Saturday, February 06, 2010 11:41 PM
> > > > > Subject: Re: [emax] Re: Point me to the places where to buy the right CF
> > > > > kit.
> > > > >
> > > > >
> > > > > > Ah, OK. I understand the situation now. Sorry if you've shared this
> > > > > > information with the group already, but what external SCSI devices
> > > > > > have you tried?
> > > > > >
> > > > > > The external SCSI > IDE > CF I'm using is the Spyrus MC-DISK2, which I
> > > > > > purchased from scsiforsamplers.com in 2008 before they ran out. As
> > > > > > noted, I successfully formatted two 1GB SanDisk CF cards with this
> > > > > > unit (set to SCSI device #3). I've also used this device successfully
> > > > > > with my Emulator III (set to device #5).
> > > > > >
> > > > > > Also, what type of Emax II do you have, and are you running the latest
> > > > > > OS (2.14)? My Emax II was running 2.14 when I formatted the cards.
> > > > > >
> > > > > >
> > > > > > On Feb 6, 2010, at 6:09 PM, drifter7508 wrote:
> > > > > >
> > > > > >> I have tried a bunch of different CF cards.
> > > > > >> Most recently Sandisk 512 Mb oldschool
> > > > > >> Dos fat 16 preform. cards. No luck.
> > > > > >> The Emax wont even find the
> > > > > >> units in the scsi connection. So I cant
> > > > > >> format anything. :-(
> > > > > >>
> > > > > >> --- In emax@yahoogroups.com, "Brandt R. Gassman" <brandt@> wrote:
> > > > > >> >
> > > > > >> > What brand of CF cards are you using? How long are you allowing for
> > > > > >> > the cards to format? I just successfully formatted two 1GB CF cards
> > > > > >> > on an Emax II Turbo rack, but each card took about three hours to
> > > > > >> > complete the "Verifying" process.
> > > > > >> >
> > > > > >> >
> > > > > >> > On Feb 6, 2010, at 5:16 PM, drifter7508 wrote:
> > > > > >> >
> > > > > >> > > Isnt that exactly what I recently bought and
> > > > > >> > > failed with? Not the same brand "Acard"
> > > > > >> > > but exactly the same spec.
> > > > > >> > >
> > > > > >> > > I got 2 scsi cases allready. :)
> > > > > >> > >
> > > > > >> > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> > > > > >> > > >
> > > > > >> > > > you are going to find it hard now most kits have been sold buy a
> > > > > >> > > acard 7720u scsi to ide adapter by an external scsi cdrom case
> > > > > >> get a
> > > > > >> > > ide to cf adapter try and get a atapi compliant so that it is hot
> > > > > >> > > swappable
> > > > > >> > > >
> > > > > >> > > > and a 5.25"plate to 3.5" plate reducer for the 3.5" floppy size
> > > > > >> > > ide to cf card drive this set up is going to cost you a bit so
> > > > > >> shop
> > > > > >> > > around on ebay for the scsi xternal cdrom case discard the cdrom
> > > > > >> and
> > > > > >> > > the scsi to ide interface
> > > > > >> > > > ----- Original Message -----
> > > > > >> > > > From: drifter7508
> > > > > >> > > > To: emax@yahoogroups.com
> > > > > >> > > > Sent: Saturday, February 06, 2010 9:20 PM
> > > > > >> > > > Subject: [emax] Point me to the places where to buy the right CF
> > > > > >> > > kit.
> > > > > >> > > >
> > > > > >> > > >
> > > > > >> > > >
> > > > > >> > > > So, Im fed up with all failures now.
> > > > > >> > > >
> > > > > >> > > > Can somebody please point me to a CF kit that actually 100%
> > > > > >> > > > works with EMAX II.
> > > > > >> > > >
> > > > > >> > > > I would not like to buy a slim floppy and such, I'd rather
> > > > > >> have a
> > > > > >> > > > the CF kit installed in an external scsi case.
> > > > > >> > > >
> > > > > >> > > > Thx.
> > > > > >> > > >
> > > > > >> > > >
> > > > > >> > > >
> > > > > >> > > >
> > > > > >> > > >
> > > > > >> > > >
> > > > > >> > > > ----------------------------------------------------------
> > > > > >> > > >
> > > > > >> > > >
> > > > > >> > > >
> > > > > >> > > > No virus found in this incoming message.
> > > > > >> > > > Checked by AVG - www.avg.com
> > > > > >> > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date:
> > > > > >> > > 02/06/10 07:35:00
> > > > > >> > > >
> > > > > >> > > >
> > > > > >> > > > [Non-text portions of this message have been removed]
> > > > > >> > > >
> > > > > >> > >
> > > > > >> > >
> > > > > >> > >
> > > > > >> >
> > > > > >> >
> > > > > >> >
> > > > > >> > [Non-text portions of this message have been removed]
> > > > > >> >
> > > > > >>
> > > > > >>
> > > > > >>
> > > > > >
> > > > > >
> > > > > >
> > > > > > [Non-text portions of this message have been removed]
> > > > > >
> > > > > >
> > > > > >
> > > > > > ------------------------------------
> > > > > >
> > > > > > Emax and Emax II User's Group Website
> > > > > >
> > > > > > http://www.silveriafamily.comYahoo! Groups Links
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > > > ----------------------------------------------------------
> > > > >
> > > > >
> > > > >
> > > > > No virus found in this incoming message.
> > > > > Checked by AVG - www.avg.com
> > > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: 02/06/10
> > > > > 07:35:00
> > > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > ----------------------------------------------------------
> > > >
> > > >
> > > >
> > > > No virus found in this incoming message.
> > > > Checked by AVG - www.avg.com
> > > > Version: 8.5.435 / Virus Database: 271.1.1/2672 - Release Date: 02/06/10 19:35:00
> > > >
> > > >
> > > > [Non-text portions of this message have been removed]
> > > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > ----------------------------------------------------------
> > >
> > >
> > >
> > > No virus found in this incoming message.
> > > Checked by AVG - www.avg.com
> > > Version: 8.5.435 / Virus Database: 271.1.1/2672 - Release Date: 02/06/10 19:35:00
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> >
> >
> >
> >
> >
> >
> > ----------------------------------------------------------
> >
> >
> >
> > No virus found in this incoming message.
> > Checked by AVG - www.avg.com
> > Version: 8.5.435 / Virus Database: 271.1.1/2673 - Release Date: 02/07/10 07:22:00
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>
>
>
>
> ----------------------------------------------------------
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.435 / Virus Database: 271.1.1/2673 - Release Date: 02/07/10 07:22:00
>
>
> [Non-text portions of this message have been removed]
>
------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.435 / Virus Database: 271.1.1/2673 - Release Date: 02/07/10 07:22:00
[Non-text portions of this message have been removed]2010-02-08 by drifter7508
http://www.span.com/product_info.php?products_id=1058 So this is one then? This one will work with "the right" CF adapter? Is this the one you have? By the way, thx for helping me out with all this Jammie. You are gold! =) --- In emax@yahoogroups.com, "jammie" <jammie.emma@...> wrote:
> > no dopnt use that 1 dont work with out down grading it > > i have a spare 1 you can have for £50 plus postage > ----- Original Message ----- > From: drifter7508 > To: emax@yahoogroups.com > Sent: Monday, February 08, 2010 11:06 AM > Subject: [emax] Re: Point me to the places where to buy the right CF kit. > > > > http://www.ggsdata.se/PC/aec7720uw.html > > Would this cards work with a 50 Pin adapter? > The selles says it compatible with ULTRA SCSI. > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > i dont know what to surgest as that cdrom works on mine > > > > the r-idsc-e/r scsi to ide card that 1 dont work for my ensoniqs and i have not tried the emaxes with that card i know it works with a yam a3000 as i have 1 attached to mine > > > > the card i recomended was the iscd21-e but they have all gone scsifoursamplers brought them all for him to sell for the eps and asr10 samplers > > > > the only other cards are the acard7720u but they are like rocking horse pooh now > > > > the acard 7726 might work with a software revision ask ted as he sold me some 7722 cards that work but are only atapi you can use them with standard cdroms and atapi zip drives im making some atapi cf card adapters but am only at project stage at the moment > > > > i might have a spare 1 ill have a look at my inventory as most have been installed into samplers already > > ----- Original Message ----- > > From: drifter7508 > > To: emax@yahoogroups.com > > Sent: Sunday, February 07, 2010 6:57 PM > > Subject: [emax] Re: Point me to the places where to buy the right CF kit. > > > > > > > > Yes Im the one with the CD-Rom you recom. to buy. > > I have tried 2 different Quantum HD's in both my > > external cases and they run perfect in both of them. > > They also run perfect along with the internal HD at the same time. > > Have also tried all things with the internal HD disabled. > > > > I have OS 2.14 in my Turbo. > > > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > > > have you tried it with any other hd or cdrom > > > > > > are you the 1 who had problems with the scsi cdrom > > > > > > also have you tried disabling the internal hd to see if it works then some off the old scsi drives cuase problems when more than 1 on a system > > > ----- Original Message ----- > > > From: drifter7508 > > > To: emax@yahoogroups.com > > > Sent: Sunday, February 07, 2010 5:58 PM > > > Subject: [emax] Re: Point me to the places where to buy the right CF kit. > > > > > > > > > > > > My Emax II Turbo has the latest OS installed. > > > > > > Internal HD is set to SCSI ID 1. > > > > > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > > > > > http://store.compuapps.com/idecf-reader.html > > > > > > > > i think the cf adapter is your problem > > > > > > > > heres a link to good one that works and they do them in black and white and they come in a 3.5" floppy housing > > > > > > > > also what is your emax id channel set to > > > > > > > > but like i said the idsc21-e is the card that works with mine the 1 you have is the updated 1 and does not have the term options like the idsc21-e > > > > > > > > the acard a7720u works with the os that ted has > > > > ----- Original Message ----- > > > > From: drifter7508 > > > > To: emax@yahoogroups.com > > > > Sent: Sunday, February 07, 2010 3:53 PM > > > > Subject: [emax] Re: Point me to the places where to buy the right CF kit. > > > > > > > > > > > > > > > > There is an image of the IDE CF card reader in my earlier post. > > > > (With all the other links an images) > > > > > > > > http://img62.imageshack.us/img62/1481/img0380p.jpg > > > > > > > > Just tried the settings you recom., sadly... no luck at all =( > > > > > > > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > > > > > > > sorry pin 8 is the rom flash pin 9 is the termination this needs to be off for the self termination > > > > > ----- Original Message ----- > > > > > From: drifter7508 > > > > > To: emax@yahoogroups.com > > > > > Sent: Sunday, February 07, 2010 1:28 PM > > > > > Subject: [emax] Re: Point me to the places where to buy the right CF kit. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > SCSI TO IDE BRIDGE: > > > > > http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=330387956791&ssPageName=STRK:MEWNX:IT > > > > > > > > > > My settings at the moment: > > > > > http://img59.imageshack.us/img59/9342/img0376x.jpg > > > > > > > > > > Jumper settings manual (I think): > > > > > http://eab.abime.net/attachment.php?...8&d=1228279010 > > > > > > > > > > -------------------------------------- > > > > > > > > > > CF IDE READER CARD: > > > > > http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=180328325603&ssPageName=STRK:MEWAX:IT > > > > > > > > > > My settings at the moment: > > > > > http://img62.imageshack.us/img62/1481/img0380p.jpg > > > > > > > > > > ---------------------------------- > > > > > > > > > > Settings for my Panasonic SCSI CD (that would not work either) > > > > > http://img59.imageshack.us/img59/762/img0374v.jpg > > > > > > > > > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > > > > > > > > > what make and models did you buy first > > > > > > > > > > > > what jumper settings are you using as this makes a big difference > > > > > > > > > > > > what ide to cf card adapter are you using as some only support pio mode > > > > > > > > > > > > and the scsi to ide needs to be set to this mode to work > > > > > > > > > > > > the cf card that you got is fine they work > > > > > > > > > > > > can you post pictures of set up as i can tell you what jumpers and settings > > > > > > to get it to work so can ted > > > > > > ----- Original Message ----- > > > > > > From: "Brandt R. Gassman" <brandt@> > > > > > > To: <emax@yahoogroups.com> > > > > > > Sent: Saturday, February 06, 2010 11:41 PM > > > > > > Subject: Re: [emax] Re: Point me to the places where to buy the right CF > > > > > > kit. > > > > > > > > > > > > > > > > > > > Ah, OK. I understand the situation now. Sorry if you've shared this > > > > > > > information with the group already, but what external SCSI devices > > > > > > > have you tried? > > > > > > > > > > > > > > The external SCSI > IDE > CF I'm using is the Spyrus MC-DISK2, which I > > > > > > > purchased from scsiforsamplers.com in 2008 before they ran out. As > > > > > > > noted, I successfully formatted two 1GB SanDisk CF cards with this > > > > > > > unit (set to SCSI device #3). I've also used this device successfully > > > > > > > with my Emulator III (set to device #5). > > > > > > > > > > > > > > Also, what type of Emax II do you have, and are you running the latest > > > > > > > OS (2.14)? My Emax II was running 2.14 when I formatted the cards. > > > > > > > > > > > > > > > > > > > > > On Feb 6, 2010, at 6:09 PM, drifter7508 wrote: > > > > > > > > > > > > > >> I have tried a bunch of different CF cards. > > > > > > >> Most recently Sandisk 512 Mb oldschool > > > > > > >> Dos fat 16 preform. cards. No luck. > > > > > > >> The Emax wont even find the > > > > > > >> units in the scsi connection. So I cant > > > > > > >> format anything. :-( > > > > > > >> > > > > > > >> --- In emax@yahoogroups.com, "Brandt R. Gassman" <brandt@> wrote: > > > > > > >> > > > > > > > >> > What brand of CF cards are you using? How long are you allowing for > > > > > > >> > the cards to format? I just successfully formatted two 1GB CF cards > > > > > > >> > on an Emax II Turbo rack, but each card took about three hours to > > > > > > >> > complete the "Verifying" process. > > > > > > >> > > > > > > > >> > > > > > > > >> > On Feb 6, 2010, at 5:16 PM, drifter7508 wrote: > > > > > > >> > > > > > > > >> > > Isnt that exactly what I recently bought and > > > > > > >> > > failed with? Not the same brand "Acard" > > > > > > >> > > but exactly the same spec. > > > > > > >> > > > > > > > > >> > > I got 2 scsi cases allready. :) > > > > > > >> > > > > > > > > >> > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > > > >> > > > > > > > > > >> > > > you are going to find it hard now most kits have been sold buy a > > > > > > >> > > acard 7720u scsi to ide adapter by an external scsi cdrom case > > > > > > >> get a > > > > > > >> > > ide to cf adapter try and get a atapi compliant so that it is hot > > > > > > >> > > swappable > > > > > > >> > > > > > > > > > >> > > > and a 5.25"plate to 3.5" plate reducer for the 3.5" floppy size > > > > > > >> > > ide to cf card drive this set up is going to cost you a bit so > > > > > > >> shop > > > > > > >> > > around on ebay for the scsi xternal cdrom case discard the cdrom > > > > > > >> and > > > > > > >> > > the scsi to ide interface > > > > > > >> > > > ----- Original Message ----- > > > > > > >> > > > From: drifter7508 > > > > > > >> > > > To: emax@yahoogroups.com > > > > > > >> > > > Sent: Saturday, February 06, 2010 9:20 PM > > > > > > >> > > > Subject: [emax] Point me to the places where to buy the right CF > > > > > > >> > > kit. > > > > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > So, Im fed up with all failures now. > > > > > > >> > > > > > > > > > >> > > > Can somebody please point me to a CF kit that actually 100% > > > > > > >> > > > works with EMAX II. > > > > > > >> > > > > > > > > > >> > > > I would not like to buy a slim floppy and such, I'd rather > > > > > > >> have a > > > > > > >> > > > the CF kit installed in an external scsi case. > > > > > > >> > > > > > > > > > >> > > > Thx. > > > > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > ---------------------------------------------------------- > > > > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > No virus found in this incoming message. > > > > > > >> > > > Checked by AVG - www.avg.com > > > > > > >> > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: > > > > > > >> > > 02/06/10 07:35:00 > > > > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > [Non-text portions of this message have been removed] > > > > > > >> > > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > > > > > >> > > > > > > > >> > > > > > > > >> > [Non-text portions of this message have been removed] > > > > > > >> > > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > > > > > > > > > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------ > > > > > > > > > > > > > > Emax and Emax II User's Group Website > > > > > > > > > > > > > > http://www.silveriafamily.comYahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > > > > > > > > > > > > > > > > > No virus found in this incoming message. > > > > > > Checked by AVG - www.avg.com > > > > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: 02/06/10 > > > > > > 07:35:00 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > > > > > > > > > > > > > No virus found in this incoming message. > > > > > Checked by AVG - www.avg.com > > > > > Version: 8.5.435 / Virus Database: 271.1.1/2672 - Release Date: 02/06/10 19:35:00 > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > > > > > > > > > No virus found in this incoming message. > > > > Checked by AVG - www.avg.com > > > > Version: 8.5.435 / Virus Database: 271.1.1/2672 - Release Date: 02/06/10 19:35:00 > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > > > > > No virus found in this incoming message. > > > Checked by AVG - www.avg.com > > > Version: 8.5.435 / Virus Database: 271.1.1/2673 - Release Date: 02/07/10 07:22:00 > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > No virus found in this incoming message. > > Checked by AVG - www.avg.com > > Version: 8.5.435 / Virus Database: 271.1.1/2673 - Release Date: 02/07/10 07:22:00 > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > ------------------------------------------------------------------------------ > > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.435 / Virus Database: 271.1.1/2673 - Release Date: 02/07/10 07:22:00 > > > [Non-text portions of this message have been removed] >
2010-02-08 by jammie
yep thats the 1
----- Original Message -----
From: drifter7508
To: emax@yahoogroups.com
Sent: Monday, February 08, 2010 12:22 PM
Subject: [emax] Re: Point me to the places where to buy the right CF kit.
http://www.span.com/product_info.php?products_id=1058
So this is one then? This one will work with "the right"
CF adapter? Is this the one you have?
By the way, thx for helping me out with all this Jammie.
You are gold! =)
--- In emax@yahoogroups.com, "jammie" <jammie.emma@...> wrote:
>
> no dopnt use that 1 dont work with out down grading it
>
> i have a spare 1 you can have for £50 plus postage
> ----- Original Message -----
> From: drifter7508
> To: emax@yahoogroups.com
> Sent: Monday, February 08, 2010 11:06 AM
> Subject: [emax] Re: Point me to the places where to buy the right CF kit.
>
>
>
> http://www.ggsdata.se/PC/aec7720uw.html
>
> Would this cards work with a 50 Pin adapter?
> The selles says it compatible with ULTRA SCSI.
>
> --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> >
> > i dont know what to surgest as that cdrom works on mine
> >
> > the r-idsc-e/r scsi to ide card that 1 dont work for my ensoniqs and i have not tried the emaxes with that card i know it works with a yam a3000 as i have 1 attached to mine
> >
> > the card i recomended was the iscd21-e but they have all gone scsifoursamplers brought them all for him to sell for the eps and asr10 samplers
> >
> > the only other cards are the acard7720u but they are like rocking horse pooh now
> >
> > the acard 7726 might work with a software revision ask ted as he sold me some 7722 cards that work but are only atapi you can use them with standard cdroms and atapi zip drives im making some atapi cf card adapters but am only at project stage at the moment
> >
> > i might have a spare 1 ill have a look at my inventory as most have been installed into samplers already
> > ----- Original Message -----
> > From: drifter7508
> > To: emax@yahoogroups.com
> > Sent: Sunday, February 07, 2010 6:57 PM
> > Subject: [emax] Re: Point me to the places where to buy the right CF kit.
> >
> >
> >
> > Yes Im the one with the CD-Rom you recom. to buy.
> > I have tried 2 different Quantum HD's in both my
> > external cases and they run perfect in both of them.
> > They also run perfect along with the internal HD at the same time.
> > Have also tried all things with the internal HD disabled.
> >
> > I have OS 2.14 in my Turbo.
> >
> > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> > >
> > > have you tried it with any other hd or cdrom
> > >
> > > are you the 1 who had problems with the scsi cdrom
> > >
> > > also have you tried disabling the internal hd to see if it works then some off the old scsi drives cuase problems when more than 1 on a system
> > > ----- Original Message -----
> > > From: drifter7508
> > > To: emax@yahoogroups.com
> > > Sent: Sunday, February 07, 2010 5:58 PM
> > > Subject: [emax] Re: Point me to the places where to buy the right CF kit.
> > >
> > >
> > >
> > > My Emax II Turbo has the latest OS installed.
> > >
> > > Internal HD is set to SCSI ID 1.
> > >
> > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> > > >
> > > > http://store.compuapps.com/idecf-reader.html
> > > >
> > > > i think the cf adapter is your problem
> > > >
> > > > heres a link to good one that works and they do them in black and white and they come in a 3.5" floppy housing
> > > >
> > > > also what is your emax id channel set to
> > > >
> > > > but like i said the idsc21-e is the card that works with mine the 1 you have is the updated 1 and does not have the term options like the idsc21-e
> > > >
> > > > the acard a7720u works with the os that ted has
> > > > ----- Original Message -----
> > > > From: drifter7508
> > > > To: emax@yahoogroups.com
> > > > Sent: Sunday, February 07, 2010 3:53 PM
> > > > Subject: [emax] Re: Point me to the places where to buy the right CF kit.
> > > >
> > > >
> > > >
> > > > There is an image of the IDE CF card reader in my earlier post.
> > > > (With all the other links an images)
> > > >
> > > > http://img62.imageshack.us/img62/1481/img0380p.jpg
> > > >
> > > > Just tried the settings you recom., sadly... no luck at all =(
> > > >
> > > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> > > > >
> > > > > sorry pin 8 is the rom flash pin 9 is the termination this needs to be off for the self termination
> > > > > ----- Original Message -----
> > > > > From: drifter7508
> > > > > To: emax@yahoogroups.com
> > > > > Sent: Sunday, February 07, 2010 1:28 PM
> > > > > Subject: [emax] Re: Point me to the places where to buy the right CF kit.
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > SCSI TO IDE BRIDGE:
> > > > > http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=330387956791&ssPageName=STRK:MEWNX:IT
> > > > >
> > > > > My settings at the moment:
> > > > > http://img59.imageshack.us/img59/9342/img0376x.jpg
> > > > >
> > > > > Jumper settings manual (I think):
> > > > > http://eab.abime.net/attachment.php?...8&d=1228279010
> > > > >
> > > > > --------------------------------------
> > > > >
> > > > > CF IDE READER CARD:
> > > > > http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=180328325603&ssPageName=STRK:MEWAX:IT
> > > > >
> > > > > My settings at the moment:
> > > > > http://img62.imageshack.us/img62/1481/img0380p.jpg
> > > > >
> > > > > ----------------------------------
> > > > >
> > > > > Settings for my Panasonic SCSI CD (that would not work either)
> > > > > http://img59.imageshack.us/img59/762/img0374v.jpg
> > > > >
> > > > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> > > > > >
> > > > > > what make and models did you buy first
> > > > > >
> > > > > > what jumper settings are you using as this makes a big difference
> > > > > >
> > > > > > what ide to cf card adapter are you using as some only support pio mode
> > > > > >
> > > > > > and the scsi to ide needs to be set to this mode to work
> > > > > >
> > > > > > the cf card that you got is fine they work
> > > > > >
> > > > > > can you post pictures of set up as i can tell you what jumpers and settings
> > > > > > to get it to work so can ted
> > > > > > ----- Original Message -----
> > > > > > From: "Brandt R. Gassman" <brandt@>
> > > > > > To: <emax@yahoogroups.com>
> > > > > > Sent: Saturday, February 06, 2010 11:41 PM
> > > > > > Subject: Re: [emax] Re: Point me to the places where to buy the right CF
> > > > > > kit.
> > > > > >
> > > > > >
> > > > > > > Ah, OK. I understand the situation now. Sorry if you've shared this
> > > > > > > information with the group already, but what external SCSI devices
> > > > > > > have you tried?
> > > > > > >
> > > > > > > The external SCSI > IDE > CF I'm using is the Spyrus MC-DISK2, which I
> > > > > > > purchased from scsiforsamplers.com in 2008 before they ran out. As
> > > > > > > noted, I successfully formatted two 1GB SanDisk CF cards with this
> > > > > > > unit (set to SCSI device #3). I've also used this device successfully
> > > > > > > with my Emulator III (set to device #5).
> > > > > > >
> > > > > > > Also, what type of Emax II do you have, and are you running the latest
> > > > > > > OS (2.14)? My Emax II was running 2.14 when I formatted the cards.
> > > > > > >
> > > > > > >
> > > > > > > On Feb 6, 2010, at 6:09 PM, drifter7508 wrote:
> > > > > > >
> > > > > > >> I have tried a bunch of different CF cards.
> > > > > > >> Most recently Sandisk 512 Mb oldschool
> > > > > > >> Dos fat 16 preform. cards. No luck.
> > > > > > >> The Emax wont even find the
> > > > > > >> units in the scsi connection. So I cant
> > > > > > >> format anything. :-(
> > > > > > >>
> > > > > > >> --- In emax@yahoogroups.com, "Brandt R. Gassman" <brandt@> wrote:
> > > > > > >> >
> > > > > > >> > What brand of CF cards are you using? How long are you allowing for
> > > > > > >> > the cards to format? I just successfully formatted two 1GB CF cards
> > > > > > >> > on an Emax II Turbo rack, but each card took about three hours to
> > > > > > >> > complete the "Verifying" process.
> > > > > > >> >
> > > > > > >> >
> > > > > > >> > On Feb 6, 2010, at 5:16 PM, drifter7508 wrote:
> > > > > > >> >
> > > > > > >> > > Isnt that exactly what I recently bought and
> > > > > > >> > > failed with? Not the same brand "Acard"
> > > > > > >> > > but exactly the same spec.
> > > > > > >> > >
> > > > > > >> > > I got 2 scsi cases allready. :)
> > > > > > >> > >
> > > > > > >> > > --- In emax@...m, "jammie" <jammie.emma@> wrote:
> > > > > > >> > > >
> > > > > > >> > > > you are going to find it hard now most kits have been sold buy a
> > > > > > >> > > acard 7720u scsi to ide adapter by an external scsi cdrom case
> > > > > > >> get a
> > > > > > >> > > ide to cf adapter try and get a atapi compliant so that it is hot
> > > > > > >> > > swappable
> > > > > > >> > > >
> > > > > > >> > > > and a 5.25"plate to 3.5" plate reducer for the 3.5" floppy size
> > > > > > >> > > ide to cf card drive this set up is going to cost you a bit so
> > > > > > >> shop
> > > > > > >> > > around on ebay for the scsi xternal cdrom case discard the cdrom
> > > > > > >> and
> > > > > > >> > > the scsi to ide interface
> > > > > > >> > > > ----- Original Message -----
> > > > > > >> > > > From: drifter7508
> > > > > > >> > > > To: emax@yahoogroups.com
> > > > > > >> > > > Sent: Saturday, February 06, 2010 9:20 PM
> > > > > > >> > > > Subject: [emax] Point me to the places where to buy the right CF
> > > > > > >> > > kit.
> > > > > > >> > > >
> > > > > > >> > > >
> > > > > > >> > > >
> > > > > > >> > > > So, Im fed up with all failures now.
> > > > > > >> > > >
> > > > > > >> > > > Can somebody please point me to a CF kit that actually 100%
> > > > > > >> > > > works with EMAX II.
> > > > > > >> > > >
> > > > > > >> > > > I would not like to buy a slim floppy and such, I'd rather
> > > > > > >> have a
> > > > > > >> > > > the CF kit installed in an external scsi case.
> > > > > > >> > > >
> > > > > > >> > > > Thx.
> > > > > > >> > > >
> > > > > > >> > > >
> > > > > > >> > > >
> > > > > > >> > > >
> > > > > > >> > > >
> > > > > > >> > > >
> > > > > > >> > > > ----------------------------------------------------------
> > > > > > >> > > >
> > > > > > >> > > >
> > > > > > >> > > >
> > > > > > >> > > > No virus found in this incoming message.
> > > > > > >> > > > Checked by AVG - www.avg.com
> > > > > > >> > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date:
> > > > > > >> > > 02/06/10 07:35:00
> > > > > > >> > > >
> > > > > > >> > > >
> > > > > > >> > > > [Non-text portions of this message have been removed]
> > > > > > >> > > >
> > > > > > >> > >
> > > > > > >> > >
> > > > > > >> > >
> > > > > > >> >
> > > > > > >> >
> > > > > > >> >
> > > > > > >> > [Non-text portions of this message have been removed]
> > > > > > >> >
> > > > > > >>
> > > > > > >>
> > > > > > >>
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > [Non-text portions of this message have been removed]
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > ------------------------------------
> > > > > > >
> > > > > > > Emax and Emax II User's Group Website
> > > > > > >
> > > > > > > http://www.silveriafamily.comYahoo! Groups Links
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > >
> > > > > >
> > > > > > ----------------------------------------------------------
> > > > > >
> > > > > >
> > > > > >
> > > > > > No virus found in this incoming message.
> > > > > > Checked by AVG - www.avg.com
> > > > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: 02/06/10
> > > > > > 07:35:00
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > ----------------------------------------------------------
> > > > >
> > > > >
> > > > >
> > > > > No virus found in this incoming message.
> > > > > Checked by AVG - www.avg.com
> > > > > Version: 8.5.435 / Virus Database: 271.1.1/2672 - Release Date: 02/06/10 19:35:00
> > > > >
> > > > >
> > > > > [Non-text portions of this message have been removed]
> > > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > ----------------------------------------------------------
> > > >
> > > >
> > > >
> > > > No virus found in this incoming message.
> > > > Checked by AVG - www.avg.com
> > > > Version: 8.5.435 / Virus Database: 271.1.1/2672 - Release Date: 02/06/10 19:35:00
> > > >
> > > >
> > > > [Non-text portions of this message have been removed]
> > > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > ----------------------------------------------------------
> > >
> > >
> > >
> > > No virus found in this incoming message.
> > > Checked by AVG - www.avg.com
> > > Version: 8.5.435 / Virus Database: 271.1.1/2673 - Release Date: 02/07/10 07:22:00
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> >
> >
> >
> >
> >
> >
> > ----------------------------------------------------------
> >
> >
> >
> > No virus found in this incoming message.
> > Checked by AVG - www.avg.com
> > Version: 8.5.435 / Virus Database: 271.1.1/2673 - Release Date: 02/07/10 07:22:00
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>
>
>
>
> ----------------------------------------------------------
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.435 / Virus Database: 271.1.1/2673 - Release Date: 02/07/10 07:22:00
>
>
> [Non-text portions of this message have been removed]
>
------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.435 / Virus Database: 271.1.1/2675 - Release Date: 02/08/10 07:35:00
[Non-text portions of this message have been removed]2010-02-08 by drifter7508
So you have this: Adapter AEC-7720U for sale... send me a PM with your paypal adress + email and I will send you money at once. Write down the sum you want including shipping. --- In emax@yahoogroups.com, "jammie" <jammie.emma@...> wrote:
> > yep thats the 1 > ----- Original Message ----- > From: drifter7508 > To: emax@yahoogroups.com > Sent: Monday, February 08, 2010 12:22 PM > Subject: [emax] Re: Point me to the places where to buy the right CF kit. > > > > http://www.span.com/product_info.php?products_id=1058 > > So this is one then? This one will work with "the right" > CF adapter? Is this the one you have? > > By the way, thx for helping me out with all this Jammie. > You are gold! =) > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > no dopnt use that 1 dont work with out down grading it > > > > i have a spare 1 you can have for £50 plus postage > > ----- Original Message ----- > > From: drifter7508 > > To: emax@yahoogroups.com > > Sent: Monday, February 08, 2010 11:06 AM > > Subject: [emax] Re: Point me to the places where to buy the right CF kit. > > > > > > > > http://www.ggsdata.se/PC/aec7720uw.html > > > > Would this cards work with a 50 Pin adapter? > > The selles says it compatible with ULTRA SCSI. > > > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > > > i dont know what to surgest as that cdrom works on mine > > > > > > the r-idsc-e/r scsi to ide card that 1 dont work for my ensoniqs and i have not tried the emaxes with that card i know it works with a yam a3000 as i have 1 attached to mine > > > > > > the card i recomended was the iscd21-e but they have all gone scsifoursamplers brought them all for him to sell for the eps and asr10 samplers > > > > > > the only other cards are the acard7720u but they are like rocking horse pooh now > > > > > > the acard 7726 might work with a software revision ask ted as he sold me some 7722 cards that work but are only atapi you can use them with standard cdroms and atapi zip drives im making some atapi cf card adapters but am only at project stage at the moment > > > > > > i might have a spare 1 ill have a look at my inventory as most have been installed into samplers already > > > ----- Original Message ----- > > > From: drifter7508 > > > To: emax@yahoogroups.com > > > Sent: Sunday, February 07, 2010 6:57 PM > > > Subject: [emax] Re: Point me to the places where to buy the right CF kit. > > > > > > > > > > > > Yes Im the one with the CD-Rom you recom. to buy. > > > I have tried 2 different Quantum HD's in both my > > > external cases and they run perfect in both of them. > > > They also run perfect along with the internal HD at the same time. > > > Have also tried all things with the internal HD disabled. > > > > > > I have OS 2.14 in my Turbo. > > > > > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > > > > > have you tried it with any other hd or cdrom > > > > > > > > are you the 1 who had problems with the scsi cdrom > > > > > > > > also have you tried disabling the internal hd to see if it works then some off the old scsi drives cuase problems when more than 1 on a system > > > > ----- Original Message ----- > > > > From: drifter7508 > > > > To: emax@yahoogroups.com > > > > Sent: Sunday, February 07, 2010 5:58 PM > > > > Subject: [emax] Re: Point me to the places where to buy the right CF kit. > > > > > > > > > > > > > > > > My Emax II Turbo has the latest OS installed. > > > > > > > > Internal HD is set to SCSI ID 1. > > > > > > > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > > > > > > > http://store.compuapps.com/idecf-reader.html > > > > > > > > > > i think the cf adapter is your problem > > > > > > > > > > heres a link to good one that works and they do them in black and white and they come in a 3.5" floppy housing > > > > > > > > > > also what is your emax id channel set to > > > > > > > > > > but like i said the idsc21-e is the card that works with mine the 1 you have is the updated 1 and does not have the term options like the idsc21-e > > > > > > > > > > the acard a7720u works with the os that ted has > > > > > ----- Original Message ----- > > > > > From: drifter7508 > > > > > To: emax@yahoogroups.com > > > > > Sent: Sunday, February 07, 2010 3:53 PM > > > > > Subject: [emax] Re: Point me to the places where to buy the right CF kit. > > > > > > > > > > > > > > > > > > > > There is an image of the IDE CF card reader in my earlier post. > > > > > (With all the other links an images) > > > > > > > > > > http://img62.imageshack.us/img62/1481/img0380p.jpg > > > > > > > > > > Just tried the settings you recom., sadly... no luck at all =( > > > > > > > > > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > > > > > > > > > sorry pin 8 is the rom flash pin 9 is the termination this needs to be off for the self termination > > > > > > ----- Original Message ----- > > > > > > From: drifter7508 > > > > > > To: emax@yahoogroups.com > > > > > > Sent: Sunday, February 07, 2010 1:28 PM > > > > > > Subject: [emax] Re: Point me to the places where to buy the right CF kit. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > SCSI TO IDE BRIDGE: > > > > > > http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=330387956791&ssPageName=STRK:MEWNX:IT > > > > > > > > > > > > My settings at the moment: > > > > > > http://img59.imageshack.us/img59/9342/img0376x.jpg > > > > > > > > > > > > Jumper settings manual (I think): > > > > > > http://eab.abime.net/attachment.php?...8&d=1228279010 > > > > > > > > > > > > -------------------------------------- > > > > > > > > > > > > CF IDE READER CARD: > > > > > > http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=180328325603&ssPageName=STRK:MEWAX:IT > > > > > > > > > > > > My settings at the moment: > > > > > > http://img62.imageshack.us/img62/1481/img0380p.jpg > > > > > > > > > > > > ---------------------------------- > > > > > > > > > > > > Settings for my Panasonic SCSI CD (that would not work either) > > > > > > http://img59.imageshack.us/img59/762/img0374v.jpg > > > > > > > > > > > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > > > > > > > > > > > what make and models did you buy first > > > > > > > > > > > > > > what jumper settings are you using as this makes a big difference > > > > > > > > > > > > > > what ide to cf card adapter are you using as some only support pio mode > > > > > > > > > > > > > > and the scsi to ide needs to be set to this mode to work > > > > > > > > > > > > > > the cf card that you got is fine they work > > > > > > > > > > > > > > can you post pictures of set up as i can tell you what jumpers and settings > > > > > > > to get it to work so can ted > > > > > > > ----- Original Message ----- > > > > > > > From: "Brandt R. Gassman" <brandt@> > > > > > > > To: <emax@yahoogroups.com> > > > > > > > Sent: Saturday, February 06, 2010 11:41 PM > > > > > > > Subject: Re: [emax] Re: Point me to the places where to buy the right CF > > > > > > > kit. > > > > > > > > > > > > > > > > > > > > > > Ah, OK. I understand the situation now. Sorry if you've shared this > > > > > > > > information with the group already, but what external SCSI devices > > > > > > > > have you tried? > > > > > > > > > > > > > > > > The external SCSI > IDE > CF I'm using is the Spyrus MC-DISK2, which I > > > > > > > > purchased from scsiforsamplers.com in 2008 before they ran out. As > > > > > > > > noted, I successfully formatted two 1GB SanDisk CF cards with this > > > > > > > > unit (set to SCSI device #3). I've also used this device successfully > > > > > > > > with my Emulator III (set to device #5). > > > > > > > > > > > > > > > > Also, what type of Emax II do you have, and are you running the latest > > > > > > > > OS (2.14)? My Emax II was running 2.14 when I formatted the cards. > > > > > > > > > > > > > > > > > > > > > > > > On Feb 6, 2010, at 6:09 PM, drifter7508 wrote: > > > > > > > > > > > > > > > >> I have tried a bunch of different CF cards. > > > > > > > >> Most recently Sandisk 512 Mb oldschool > > > > > > > >> Dos fat 16 preform. cards. No luck. > > > > > > > >> The Emax wont even find the > > > > > > > >> units in the scsi connection. So I cant > > > > > > > >> format anything. :-( > > > > > > > >> > > > > > > > >> --- In emax@yahoogroups.com, "Brandt R. Gassman" <brandt@> wrote: > > > > > > > >> > > > > > > > > >> > What brand of CF cards are you using? How long are you allowing for > > > > > > > >> > the cards to format? I just successfully formatted two 1GB CF cards > > > > > > > >> > on an Emax II Turbo rack, but each card took about three hours to > > > > > > > >> > complete the "Verifying" process. > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > On Feb 6, 2010, at 5:16 PM, drifter7508 wrote: > > > > > > > >> > > > > > > > > >> > > Isnt that exactly what I recently bought and > > > > > > > >> > > failed with? Not the same brand "Acard" > > > > > > > >> > > but exactly the same spec. > > > > > > > >> > > > > > > > > > >> > > I got 2 scsi cases allready. :) > > > > > > > >> > > > > > > > > > >> > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote: > > > > > > > >> > > > > > > > > > > >> > > > you are going to find it hard now most kits have been sold buy a > > > > > > > >> > > acard 7720u scsi to ide adapter by an external scsi cdrom case > > > > > > > >> get a > > > > > > > >> > > ide to cf adapter try and get a atapi compliant so that it is hot > > > > > > > >> > > swappable > > > > > > > >> > > > > > > > > > > >> > > > and a 5.25"plate to 3.5" plate reducer for the 3.5" floppy size > > > > > > > >> > > ide to cf card drive this set up is going to cost you a bit so > > > > > > > >> shop > > > > > > > >> > > around on ebay for the scsi xternal cdrom case discard the cdrom > > > > > > > >> and > > > > > > > >> > > the scsi to ide interface > > > > > > > >> > > > ----- Original Message ----- > > > > > > > >> > > > From: drifter7508 > > > > > > > >> > > > To: emax@yahoogroups.com > > > > > > > >> > > > Sent: Saturday, February 06, 2010 9:20 PM > > > > > > > >> > > > Subject: [emax] Point me to the places where to buy the right CF > > > > > > > >> > > kit. > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > > >> > > > So, Im fed up with all failures now. > > > > > > > >> > > > > > > > > > > >> > > > Can somebody please point me to a CF kit that actually 100% > > > > > > > >> > > > works with EMAX II. > > > > > > > >> > > > > > > > > > > >> > > > I would not like to buy a slim floppy and such, I'd rather > > > > > > > >> have a > > > > > > > >> > > > the CF kit installed in an external scsi case. > > > > > > > >> > > > > > > > > > > >> > > > Thx. > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > > >> > > > ---------------------------------------------------------- > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > > >> > > > No virus found in this incoming message. > > > > > > > >> > > > Checked by AVG - www.avg.com > > > > > > > >> > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: > > > > > > > >> > > 02/06/10 07:35:00 > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > > >> > > > [Non-text portions of this message have been removed] > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > [Non-text portions of this message have been removed] > > > > > > > >> > > > > > > > > >> > > > > > > > >> > > > > > > > >> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------ > > > > > > > > > > > > > > > > Emax and Emax II User's Group Website > > > > > > > > > > > > > > > > http://www.silveriafamily.comYahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > > > > > > > > > > > > > > > > > > > > > No virus found in this incoming message. > > > > > > > Checked by AVG - www.avg.com > > > > > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: 02/06/10 > > > > > > > 07:35:00 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > > > > > > > > > > > > > > > > > No virus found in this incoming message. > > > > > > Checked by AVG - www.avg.com > > > > > > Version: 8.5.435 / Virus Database: 271.1.1/2672 - Release Date: 02/06/10 19:35:00 > > > > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > > > > > > > > > > > > > No virus found in this incoming message. > > > > > Checked by AVG - www.avg.com > > > > > Version: 8.5.435 / Virus Database: 271.1.1/2672 - Release Date: 02/06/10 19:35:00 > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > > > > > > > > > No virus found in this incoming message. > > > > Checked by AVG - www.avg.com > > > > Version: 8.5.435 / Virus Database: 271.1.1/2673 - Release Date: 02/07/10 07:22:00 > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > > > > > No virus found in this incoming message. > > > Checked by AVG - www.avg.com > > > Version: 8.5.435 / Virus Database: 271.1.1/2673 - Release Date: 02/07/10 07:22:00 > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > > > No virus found in this incoming message. > > Checked by AVG - www.avg.com > > Version: 8.5.435 / Virus Database: 271.1.1/2673 - Release Date: 02/07/10 07:22:00 > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > ------------------------------------------------------------------------------ > > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.435 / Virus Database: 271.1.1/2675 - Release Date: 02/08/10 07:35:00 > > > [Non-text portions of this message have been removed] >