try removing pins 4 and 5
what version os is on it
what scsi cables are you using and have you got a termination plug on there aswell as you dont need it if you leave pins 9 jumper off
----- Original Message -----
From: drifter7508
To: emax@yahoogroups.com
Sent: Sunday, February 07, 2010 5:53 PM
Subject: [emax] Re: Point me to the places where to buy the right CF kit.
No luck with those settings either im afraid.
--- In emax@yahoogroups.com, "jammie" <jammie.emma@...> wrote:
>
> make sure its set to master pins 1 and 2 shorted
>
> now your cf card supports dma only so you need to jumper pin 7 this is for dma mode
> ----- Original Message -----
> From: drifter7508
> To: emax@yahoogroups.com
> Sent: Sunday, February 07, 2010 3:53 PM
> Subject: [emax] Re: Point me to the places where to buy the right CF kit.
>
>
>
> There is an image of the IDE CF card reader in my earlier post.
> (With all the other links an images)
>
> http://img62.imageshack.us/img62/1481/img0380p.jpg
>
> Just tried the settings you recom., sadly... no luck at all =(
>
> --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> >
> > sorry pin 8 is the rom flash pin 9 is the termination this needs to be off for the self termination
> > ----- Original Message -----
> > From: drifter7508
> > To: emax@yahoogroups.com
> > Sent: Sunday, February 07, 2010 1:28 PM
> > Subject: [emax] Re: Point me to the places where to buy the right CF kit.
> >
> >
> >
> >
> >
> > SCSI TO IDE BRIDGE:
> > http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=330387956791&ssPageName=STRK:MEWNX:IT
> >
> > My settings at the moment:
> > http://img59.imageshack.us/img59/9342/img0376x.jpg
> >
> > Jumper settings manual (I think):
> > http://eab.abime.net/attachment.php?...8&d=1228279010
> >
> > --------------------------------------
> >
> > CF IDE READER CARD:
> > http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=180328325603&ssPageName=STRK:MEWAX:IT
> >
> > My settings at the moment:
> > http://img62.imageshack.us/img62/1481/img0380p.jpg
> >
> > ----------------------------------
> >
> > Settings for my Panasonic SCSI CD (that would not work either)
> > http://img59.imageshack.us/img59/762/img0374v.jpg
> >
> > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> > >
> > > what make and models did you buy first
> > >
> > > what jumper settings are you using as this makes a big difference
> > >
> > > what ide to cf card adapter are you using as some only support pio mode
> > >
> > > and the scsi to ide needs to be set to this mode to work
> > >
> > > the cf card that you got is fine they work
> > >
> > > can you post pictures of set up as i can tell you what jumpers and settings
> > > to get it to work so can ted
> > > ----- Original Message -----
> > > From: "Brandt R. Gassman" <brandt@>
> > > To: <emax@yahoogroups.com>
> > > Sent: Saturday, February 06, 2010 11:41 PM
> > > Subject: Re: [emax] Re: Point me to the places where to buy the right CF
> > > kit.
> > >
> > >
> > > > Ah, OK. I understand the situation now. Sorry if you've shared this
> > > > information with the group already, but what external SCSI devices
> > > > have you tried?
> > > >
> > > > The external SCSI > IDE > CF I'm using is the Spyrus MC-DISK2, which I
> > > > purchased from scsiforsamplers.com in 2008 before they ran out. As
> > > > noted, I successfully formatted two 1GB SanDisk CF cards with this
> > > > unit (set to SCSI device #3). I've also used this device successfully
> > > > with my Emulator III (set to device #5).
> > > >
> > > > Also, what type of Emax II do you have, and are you running the latest
> > > > OS (2.14)? My Emax II was running 2.14 when I formatted the cards.
> > > >
> > > >
> > > > On Feb 6, 2010, at 6:09 PM, drifter7508 wrote:
> > > >
> > > >> I have tried a bunch of different CF cards.
> > > >> Most recently Sandisk 512 Mb oldschool
> > > >> Dos fat 16 preform. cards. No luck.
> > > >> The Emax wont even find the
> > > >> units in the scsi connection. So I cant
> > > >> format anything. :-(
> > > >>
> > > >> --- In emax@yahoogroups.com, "Brandt R. Gassman" <brandt@> wrote:
> > > >> >
> > > >> > What brand of CF cards are you using? How long are you allowing for
> > > >> > the cards to format? I just successfully formatted two 1GB CF cards
> > > >> > on an Emax II Turbo rack, but each card took about three hours to
> > > >> > complete the "Verifying" process.
> > > >> >
> > > >> >
> > > >> > On Feb 6, 2010, at 5:16 PM, drifter7508 wrote:
> > > >> >
> > > >> > > Isnt that exactly what I recently bought and
> > > >> > > failed with? Not the same brand "Acard"
> > > >> > > but exactly the same spec.
> > > >> > >
> > > >> > > I got 2 scsi cases allready. :)
> > > >> > >
> > > >> > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> > > >> > > >
> > > >> > > > you are going to find it hard now most kits have been sold buy a
> > > >> > > acard 7720u scsi to ide adapter by an external scsi cdrom case
> > > >> get a
> > > >> > > ide to cf adapter try and get a atapi compliant so that it is hot
> > > >> > > swappable
> > > >> > > >
> > > >> > > > and a 5.25"plate to 3.5" plate reducer for the 3.5" floppy size
> > > >> > > ide to cf card drive this set up is going to cost you a bit so
> > > >> shop
> > > >> > > around on ebay for the scsi xternal cdrom case discard the cdrom
> > > >> and
> > > >> > > the scsi to ide interface
> > > >> > > > ----- Original Message -----
> > > >> > > > From: drifter7508
> > > >> > > > To: emax@yahoogroups.com
> > > >> > > > Sent: Saturday, February 06, 2010 9:20 PM
> > > >> > > > Subject: [emax] Point me to the places where to buy the right CF
> > > >> > > kit.
> > > >> > > >
> > > >> > > >
> > > >> > > >
> > > >> > > > So, Im fed up with all failures now.
> > > >> > > >
> > > >> > > > Can somebody please point me to a CF kit that actually 100%
> > > >> > > > works with EMAX II.
> > > >> > > >
> > > >> > > > I would not like to buy a slim floppy and such, I'd rather
> > > >> have a
> > > >> > > > the CF kit installed in an external scsi case.
> > > >> > > >
> > > >> > > > Thx.
> > > >> > > >
> > > >> > > >
> > > >> > > >
> > > >> > > >
> > > >> > > >
> > > >> > > >
> > > >> > > > ----------------------------------------------------------
> > > >> > > >
> > > >> > > >
> > > >> > > >
> > > >> > > > No virus found in this incoming message.
> > > >> > > > Checked by AVG - www.avg.com
> > > >> > > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date:
> > > >> > > 02/06/10 07:35:00
> > > >> > > >
> > > >> > > >
> > > >> > > > [Non-text portions of this message have been removed]
> > > >> > > >
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> >
> > > >> >
> > > >> >
> > > >> > [Non-text portions of this message have been removed]
> > > >> >
> > > >>
> > > >>
> > > >>
> > > >
> > > >
> > > >
> > > > [Non-text portions of this message have been removed]
> > > >
> > > >
> > > >
> > > > ------------------------------------
> > > >
> > > > Emax and Emax II User's Group Website
> > > >
> > > > http://www.silveriafamily.comYahoo! Groups Links
> > > >
> > > >
> > > >
> > >
> > >
> > > ----------------------------------------------------------
> > >
> > >
> > >
> > > No virus found in this incoming message.
> > > Checked by AVG - www.avg.com
> > > Version: 8.5.435 / Virus Database: 271.1.1/2671 - Release Date: 02/06/10
> > > 07:35:00
> > >
> >
> >
> >
> >
> >
> >
> > ----------------------------------------------------------
> >
> >
> >
> > No virus found in this incoming message.
> > Checked by AVG - www.avg.com
> > Version: 8.5.435 / Virus Database: 271.1.1/2672 - Release Date: 02/06/10 19:35:00
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>
>
>
>
> ----------------------------------------------------------
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.435 / Virus Database: 271.1.1/2672 - Release Date: 02/06/10 19:35:00
>
>
> [Non-text portions of this message have been removed]
>
------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.435 / Virus Database: 271.1.1/2673 - Release Date: 02/07/10 07:22:00
[Non-text portions of this message have been removed]Message
Re: [emax] Re: Point me to the places where to buy the right CF kit.
2010-02-07 by jammie