Emax

So now it works... i got lucky...
I had looked inside before and nothing seemed loose, but I decided to take
off the analog board to look underneath it at the traces and solder points
and when I reconnected the analog board I noticed I could push the connector
farther than it had been on before!

Thanks for the help though guys

I guess the lesson is always check all the connectors thoroughly..disconnect
and reconnect!  whoot whoot!



On Thu, Feb 25, 2010 at 7:31 PM, leavesstillgreen
<errorspending@...>wrote:

>
>
> Thanks! I was still wondering about that.
>
> So, then I have no idea why i can kind of hear the sample input coming out
> of the mono output, granted this is only by amplifying the singal a ton!
>
> Anyone have an explanation for this? or why I can hear sounds that are
> tracking with the midi input, but only barely hear them?
>
> So sad this doesn't work :/ I was so excited for it! I wish I had room for
> the keyboard version...those are so plentiful it seems.
>
> It is pretty strange that I can hear the sample input barely when
> amplifying the sig
>
>
> --- In emax@yahoogroups.com <emax%40yahoogroups.com>, Dave Sotnick
> <sotnickd@...> wrote:
> >
> > On Thu, Feb 25, 2010 at 9:25 AM, leavesstillgreen
> > <errorspending@...>wrote:
>
> >
> > >
> > > When plugging into the sample input, should I be able to hear whatever
> is
> > > being fed into it easily? I'm very unfamiliar with how one should work.
> > >
> >
> > This doesn't address the other symptoms you describe, but to clarify:
> >
> > The sample input does not mirror its input signal to any outputs. If you
> > want to monitor the sample input, you must monitor it at the source. You
> can
> > only hear the sample input after it is sampled and you hit a key to play
> it
> > back.
> >
> > -Dave
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>  
>


[Non-text portions of this message have been removed]