Emax

Ooops. Be careful, a few weeks ago I connected the SCSIForSamplers drive again to my EIII and did some extensive testing, and to be honest it had problems - the EIII could not (always) save banks to the CF card, neither the OS. This drive uses that old R-IDSC-E/R board; I was going to replace it by the Acard 7720U now.
The drive works fine however on the Emax-II.
It doesn't work on the Emax-I.

///E-Synthesist 


--- In emax@yahoogroups.com, "dutchbeats" <dutchbeats@...> wrote:
>
> on the eiii forum esynthesist(hey!) said that the R-IDSC-E/R works with
> the eiii as long as it has the earlier 1.28 firmware, maybe also emax?
> also what about the yamaha V769970?
> 
> 
> --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> >
> > yes but be aware not all ide to scsi works with emax
> >
> > the scsi cards used in the akai are the idsc 2/r and dont work with
> emax or ensoniq the 7720u work with emaxes but dont with ensoniqs
> >
> > the idsc 2/r work with kurzweils with out latency
> >
> > but the acards and the iscde12 work with kursweils but have a 5
> seconds latency will trying to access drives andf folders and samples
> >   ----- Original Message -----
> >   From: dutchbeats
> >   To: emax@yahoogroups.com
> >   Sent: Saturday, October 09, 2010 6:29 PM
> >   Subject: [emax] Re: Heeere's Emax!
> >
> >
> >
> >   do you think the special mcp 2000xl scsi upgrade kit they sell is
> just an ide to scsi bridge though? it probably costs 70 dollars i'm
> guessing, bringing the total price back up to the normal cf drive price
> d'oh!
> >
> >   --- In emax@yahoogroups.com, "jammie" jammie.emma@ wrote:
> >   >
> >   > the mpc cf ide drive you can buy direct from manufacturer they are
> $50 the company is apro
> >   > ----- Original Message -----
> >   > From: dutchbeats
> >   > To: emax@yahoogroups.com
> >   > Sent: Saturday, October 09, 2010 4:32 AM
> >   > Subject: [emax] Re: Heeere's Emax!
> >   >
> >   >
> >   >
> >   > all of this just to save 40 dollars by not going to
> scsiforsamplers! the cf drives there are 'currently' $139 but they also
> sell an mpc 2000xl cf drive for $69 since it the mpc uses ide already.
> therefore there is no acard 77xx type connection in it and doesn't cost
> twice as much, but, he offers an upgrade kit if you have an mpc with the
> cf drive already you can get this kit and it (if i'm guessing correctly)
> will contain the acard bridge. for some reason i'm thinking this drive
> will work with emax with the 'kit'.
> >   >
> >   > but i'd have to pretend i have an mpc that's the only catch...lol
> >   >
> >   > --- In emax@yahoogroups.com, Ted Summers <djtbs1@> wrote:
> >   > >
> >   > > The acard- perhaps but you would need to convert from 68pin to
> 50 pin.
> >   > > The ide cannot say- maybe, maybe not- since it is a laptop IDE
> it would also need to be converted to plug in to the acard....
> >   > >
> >   > > Seems kind of kludge-y to me- a total of 4 pieces to make the
> connection...
> >   > >
> >   > >
> >   > > On Oct 8, 2010, at 8:03 PM, dutchbeats wrote:
> >   > >
> >   > >
> http://www.addonics.com/products/flash_memory_reader/ad44midecf.asp
> >   > >
> >   > >
> >   > >
> >   > > [Non-text portions of this message have been removed]
> >   > >
> >   >
> >   >
> >   >
> >   >
> >   >
> >   >
> >   > ----------------------------------------------------------
> >   >
> >   >
> >   >
> >   > No virus found in this incoming message.
> >   > Checked by AVG - www.avg.com
> >   > Version: 8.5.448 / Virus Database: 271.1.1/3183 - Release Date:
> 10/07/10 18:34:00
> >   >
> >   >
> >   > [Non-text portions of this message have been removed]
> >   >
> >
> >
> >
> >
> >
> >
> >
> ------------------------------------------------------------------------\
> ------
> >
> >
> >
> >   No virus found in this incoming message.
> >   Checked by AVG - www.avg.com
> >   Version: 8.5.448 / Virus Database: 271.1.1/3186 - Release Date:
> 10/09/10 06:34:00
> >
> >
> > [Non-text portions of this message have been removed]
> >
>