Emax

Plus OS is SE + HD support

That is what I normally ship with the SCSI update kits, as I assume you normally would have updated to SE already....

Regards,
Ted

On Oct 11, 2010, at 3:56 PM, dutchbeats wrote:

Thanks to everyone! One last question promise, does the plus os have the se functions in it? Also, can the se os boot with the cf drive or does that require the plus os with the scsi selection feature? 

--- In emax@yahoogroups.com, "esynthesist" <esynthesist@...> wrote:
>
> ...I have the old firmware IOData board, but it doesn't work with the Ensoniq EPS Classic. Unfortunately that was the original reason why I bought the CF Drive - anyway, I'm using it now with other samplers.
> I will simply put one of those HxC SD card devices now in my Ensoniq and live with the slow speed compared to the SCSI devices :-)
> 
> --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> >
> > you cant get the earlier firmware ive tried as i was trying to make that board work with the ensoniqs as the old versions work 
> > 
> > but as of yet i have not been able to source a copy
> > 
> > as for the yam it would be easier to find a needle in a hay stack
> > ----- Original Message ----- 
> > From: dutchbeats 
> > To: emax@yahoogroups.com 
> > Sent: Saturday, October 09, 2010 9:00 PM
> > Subject: [emax] Re: Heeere's Emax!
> > 
> > 
> > 
> > on the eiii forum someone said that the R-IDSC-E/R works with the eiii as long as it has the earlier 1.28 firmware, maybe also emax? also what about the yamaha V769970?
> > 
> > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> > >
> > > yes but be aware not all ide to scsi works with emax 
> > > 
> > > the scsi cards used in the akai are the idsc 2/r and dont work with emax or ensoniq the 7720u work with emaxes but dont with ensoniqs
> > > 
> > > the idsc 2/r work with kurzweils with out latency 
> > > 
> > > but the acards and the iscde12 work with kursweils but have a 5 seconds latency will trying to access drives andf folders and samples
> > > ----- Original Message ----- 
> > > From: dutchbeats 
> > > To: emax@yahoogroups.com 
> > > Sent: Saturday, October 09, 2010 6:29 PM
> > > Subject: [emax] Re: Heeere's Emax!
> > > 
> > > 
> > > 
> > > do you think the special mcp 2000xl scsi upgrade kit they sell is just an ide to scsi bridge though? it probably costs 70 dollars i'm guessing, bringing the total price back up to the normal cf drive price d'oh!
> > > 
> > > --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> > > >
> > > > the mpc cf ide drive you can buy direct from manufacturer they are $50 the company is apro 
> > > > ----- Original Message ----- 
> > > > From: dutchbeats 
> > > > To: emax@yahoogroups.com 
> > > > Sent: Saturday, October 09, 2010 4:32 AM
> > > > Subject: [emax] Re: Heeere's Emax!
> > > > 
> > > > 
> > > > 
> > > > all of this just to save 40 dollars by not going to scsiforsamplers! the cf drives there are 'currently' $139 but they also sell an mpc 2000xl cf drive for $69 since it the mpc uses ide already. therefore there is no acard 77xx type connection in it and doesn't cost twice as much, but, he offers an upgrade kit if you have an mpc with the cf drive already you can get this kit and it (if i'm guessing correctly) will contain the acard bridge. for some reason i'm thinking this drive will work with emax with the 'kit'. 
> > > > 
> > > > but i'd have to pretend i have an mpc that's the only catch...lol
> > > > 
> > > > --- In emax@yahoogroups.com, Ted Summers <djtbs1@> wrote:
> > > > >
> > > > > The acard- perhaps but you would need to convert from 68pin to 50 pin.
> > > > > The ide cannot say- maybe, maybe not- since it is a laptop IDE it would also need to be converted to plug in to the acard....
> > > > > 
> > > > > Seems kind of kludge-y to me- a total of 4 pieces to make the connection...
> > > > > 
> > > > > 
> > > > > On Oct 8, 2010, at 8:03 PM, dutchbeats wrote:
> > > > > 
> > > > > http://www.addonics.com/products/flash_memory_reader/ad44midecf.asp
> > > > > 
> > > > > 
> > > > > 
> > > > > [Non-text portions of this message have been removed]
> > > > >
> > > > 
> > > > 
> > > > 
> > > > 
> > > > 
> > > > 
> > > > ----------------------------------------------------------
> > > > 
> > > > 
> > > > 
> > > > No virus found in this incoming message.
> > > > Checked by AVG - www.avg.com 
> > > > Version: 8.5.448 / Virus Database: 271.1.1/3183 - Release Date: 10/07/10 18:34:00
> > > > 
> > > > 
> > > > [Non-text portions of this message have been removed]
> > > >
> > > 
> > > 
> > > 
> > > 
> > > 
> > > 
> > > ----------------------------------------------------------
> > > 
> > > 
> > > 
> > > No virus found in this incoming message.
> > > Checked by AVG - www.avg.com 
> > > Version: 8.5.448 / Virus Database: 271.1.1/3186 - Release Date: 10/09/10 06:34:00
> > > 
> > > 
> > > [Non-text portions of this message have been removed]
> > >
> > 
> > 
> > 
> > 
> > 
> > 
> > ----------------------------------------------------------
> > 
> > 
> > 
> > No virus found in this incoming message.
> > Checked by AVG - www.avg.com 
> > Version: 8.5.448 / Virus Database: 271.1.1/3186 - Release Date: 10/09/10 06:34:00
> > 
> > 
> > [Non-text portions of this message have been removed]
> >
>





[Non-text portions of this message have been removed]