Emax

Sounds like time for a service to me... electronic fault suggested by the nature of the interference changing when you change sample rates.... 

could be pre a to d, which would be relatively simple but depending on the type of noise you're getting it may be a purely digital problem... If you don't have signal tracing experience you're best off taking it to someone who does.

Ps don't buy monster products.... Mogami, canare, klotz are all great cable material. Buy from a cable maker who uses these cable brands. Or use them yourself to make your own cables.

--- Original Message ---

From: roy thomas <melechdidymus20012001@yahoo.com>
Sent: 4 November 2010 4/11/10
To: emax@yahoogroups.com
Subject: Re: [emax] Emax 1 Rack HD - Dirty Noise when sampling

ITS THE TYPE OF CABLE YOUR USEING TO PLUG UP TO THE EMAX TRY MONSTAR CABLE'S 




________________________________
From: Twelve bits addicted <twelvebitsaddict@yahoo.com>
To: emax@yahoogroups.com
Sent: Wed, November 3, 2010 5:33:15 AM
Subject: [emax] Emax 1 Rack HD - Dirty Noise when sampling

  
Hi everybody,

Since a few days, when sampling with my Emax 1 Rack HD, I get a "dirty noise", 
something that looks like an old time code signal, a clock signal, or something 
like that... 


I tried differents sampling frequencies, and it's still here, but at a different 
freqency... 


I also tried to unplug the HD : same results. Any idea of what I can do ?

Is my best sampler dead ?

Thanks for your help !





      

[Non-text portions of this message have been removed]



------------------------------------

Emax and Emax II User's Group Website

http://www.silveriafamily.comYahoo! Groups Links