Emax

Yes, that should work. As well as the DRAMs, you need either need the install disk or to copy the 
EEPROM data from an Emax II that has already had its RAM upgraded. 

/Tristan

Wednesday, November 24, 2010, 11:02:02 PM, you wrote:

>
  
So if I ever come across enough DRAM chips (which is a bit IF anyway) I would only need the 
install disk (if I can get that as well...)

I'm not actively looking for more RAM anyway, it's just if I come across a stash of DRAM second 
hand it would be good to know if it would be useful to get them.

Op 24 nov 2010, om 15:52 heeft tu@... het volgende geschreven:

> I just checked the memory expansion instructions and you are correct. The PALs that come 
installed in the memory expansion board do not need to be 
> changed when expanding an Emax II with 2MB on the motherboard to 4MB, 6MB or 8MB. The 
PALs in the memory expansion kits only need to be 
> swapped in when expanding an Emax II with 1MB on the motherboard.
> 
> /Tristan
> .