Emax

many thanks! 



--- In emax@yahoogroups.com, "jammie" <jammie.emma@...> wrote:
>
> on the rack you would still need the pot as the angle on the rack is a negitive veiw angle voltage
>   ----- Original Message ----- 
>   From: Jason Mc 
>   To: emax@yahoogroups.com 
>   Sent: Wednesday, March 16, 2011 12:05 AM
>   Subject: [emax] Re: LCD replacement from RS
> 
> 
>     
>   Sorry about the last post gave the wrong part number, this is exact part I used.
> 
>   I have recently replaced my el foil display with this one:
> 
>   Mouser Part #: 763-NHD-0216EZ-FLYBW
>   Manufacturer Part #: NHD-0216EZ-FL-YBW
>   Manufacturer: Newhaven Display
>   Description:LCD Character Display Modules STN- Y/G Transfl 85.0 x 36.0t
> 
>   http://www.mouser.com/ProductDetail/Newhaven-Display/NHD-0216EZ-FL-YBW/?qs=sGAEpiMZZMt7dcPGmvnkBq9RSAvEJGmRKdDSboNhMSQ%3d
> 
>   $11.35 US
> 
>   1) De-soldered the old header pins from the original display, soldered
>   them into new display.
>   2) Removed the old EL-Foil Driver (black box)
>   3) Used router and file on case to accommodate new display thickness
>   4) De-solder surface mount resistor R7, Solder resistor in R8
>   location. This supply's the +5v for LED Backlight
>   5) Header pins 1-14 need to be in place along with pin K (LED ground)
> 
>   Nice new low power LED BackLight display, great contrast no need for
>   added potentiometer.
> 
>   [Non-text portions of this message have been removed]
> 
> 
> 
>   
> 
> 
> ------------------------------------------------------------------------------
> 
> 
> 
>   No virus found in this incoming message.
>   Checked by AVG - www.avg.com 
>   Version: 8.5.449 / Virus Database: 271.1.1/3508 - Release Date: 03/15/11 07:34:00
> 
> 
> [Non-text portions of this message have been removed]
>