Emax

he said to solder 1 - 14 and pin k which is the led ground. don't solder the led + because you already are getting power for the screen by switching the resister on the led board from r7 to r8. please tell me you soldered the led + and jason is right :/





--- In emax@yahoogroups.com, "mlivingston8" <mlivingston8@...> wrote:
>
> I've replaced the header pins 1-14 to the new display but I'm confused on where to solder the A and K pins on the new display.  I see the ground and +5 on the Emax LED board but the spacing on the new display seems a bit wider than the original.  Do I have to solder the pins on the new display and bend them to fit the Emax board?
> 
> --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> >
> > on the rack you would still need the pot as the angle on the rack is a negitive veiw angle voltage
> >   ----- Original Message ----- 
> >   From: Jason Mc 
> >   To: emax@yahoogroups.com 
> >   Sent: Wednesday, March 16, 2011 12:05 AM
> >   Subject: [emax] Re: LCD replacement from RS
> > 
> > 
> >     
> >   Sorry about the last post gave the wrong part number, this is exact part I used.
> > 
> >   I have recently replaced my el foil display with this one:
> > 
> >   Mouser Part #: 763-NHD-0216EZ-FLYBW
> >   Manufacturer Part #: NHD-0216EZ-FL-YBW
> >   Manufacturer: Newhaven Display
> >   Description:LCD Character Display Modules STN- Y/G Transfl 85.0 x 36.0t
> > 
> >   http://www.mouser.com/ProductDetail/Newhaven-Display/NHD-0216EZ-FL-YBW/?qs=sGAEpiMZZMt7dcPGmvnkBq9RSAvEJGmRKdDSboNhMSQ%3d
> > 
> >   $11.35 US
> > 
> >   1) De-soldered the old header pins from the original display, soldered
> >   them into new display.
> >   2) Removed the old EL-Foil Driver (black box)
> >   3) Used router and file on case to accommodate new display thickness
> >   4) De-solder surface mount resistor R7, Solder resistor in R8
> >   location. This supply's the +5v for LED Backlight
> >   5) Header pins 1-14 need to be in place along with pin K (LED ground)
> > 
> >   Nice new low power LED BackLight display, great contrast no need for
> >   added potentiometer.
> > 
> >   [Non-text portions of this message have been removed]
> > 
> > 
> > 
> >   
> > 
> > 
> > ------------------------------------------------------------------------------
> > 
> > 
> > 
> >   No virus found in this incoming message.
> >   Checked by AVG - www.avg.com 
> >   Version: 8.5.449 / Virus Database: 271.1.1/3508 - Release Date: 03/15/11 07:34:00
> > 
> > 
> > [Non-text portions of this message have been removed]
> >
>