Emax

----- Original Message -----
From: "jg" <studioscience@...>
To: <emax@yahoogroups.com>
Sent: Monday, October 07, 2002 4:44 AM
Subject: Re: [emax] Emax & Akai MPC 3000


> I actually did end up getting it to work.
>
> What I am stumped on now is trying to get the Note
> Variation Slider of my MPC 3000 to control the Fc
> (Frequency Cut-Off) on my sample in the Emax Rack
> Sampler.
>
> I studied the manual.
> It says to assign it to the "Right Wheel".
> I go into Realtime Controls, select 2 (for "Fc") then
> assign it to Control Source #2 which is assigned to
> the "Right Wheel" & is set up as MIDI Controller # 1.
>
> I assign my MPC Slider to Controller # 1.
> No go.
>
> Anyone else here tried anything like this?
>
I don't know if the EMAX has this function, but the EMAXII has the MIDI
Analyzer.  This will show any MIDI data comming into the EMAX.  You will be
able to see if the controller data is getting to the EMAX in the first place
and then if the controller is the same one that you want the EMAX to use to
control the Fc.  On the EMAXII the MIDI analyzer is under the MASTER#9,
SPECIAL#5 menu.

Hope this helps
Steve