Emax

I tried all ways, set a scsi 0 and 1, but nothing changes,  Iomega jaz disc and the floppy disc can be formatted, but HD not. What other options are?


________________________________
From: Ted Summers <djtbs1@...>
To: emax@yahoogroups.com
Sent: Thursday, October 6, 2011 5:19 AM
Subject: Re: [emax] Re: problem with internal HD

That isn't entirely true. 
While it is correct that on Emax 2 the SCSI ID cannot be 0 for the HD, I have Emax 1 and Emax 2 BOTH with SD card media and it boots from them.

If you have set the setting for SCSI ID in Emax 2 after booting once from floppy, from there you should be able to boot from that SCSI ID.

The 5380 SCSI controller in Emax is not smart enough to really know that a drive is a removable media or not, from my experience, or research.

Regards,
Ted


On Oct 5, 2011, at 4:27 PM, jaumemod wrote:


Dear folk, checking your SCSI ID , in EMAX SCSI 0 is reserved to floppy. Checking your default SCSI HD ID, must be 1 to 7.

Put terminator jumper on HD if it is in the end of SCSI chain.

In case you use a SCSI chain disconect other devices letting alone HD and tr y to format.

Emax OS won't start from removable media HD.

--- In emax@yahoogroups.com, "Aivis Mamajevs" <pelecis@...> wrote:
>
> Hi, what could be the fault? When I turn on the internal Quantum HD LCD read "not emax2 drive." Trying to format HD LCD read "scsi hardware error". I tried to connect to other HD, but it is the same.
> Help please!
> 
> Regards,
> Aivis
>





[Non-text portions of this message have been removed]



------------------------------------

Emax and Emax II User's Group Website

http://www.silveriafamily.comYahoo! Groups Links



[Non-text portions of this message have been removed]