Emax

I know this was the case with Emax Is, but my other Emax II will happily boot from any SCSI ID once set in the master settings. 
The uncooperative Emax doesn't do the SCSI ID scan either but simply demands a system floppy.
Were there many differences between the board revisions?..


Simon

--- In emax@yahoogroups.com, "jammie" <jammie.emma@...> wrote:
>
> hd needs to be on scsi id 0 for booting from 
> 
> as its the same for the emax1 as we have also done the same but when you switch of the machine the machine does not know this sollection becuase there is no os in the machine so it loads from floppy becuase there is no hd on scsi id 0
>   ----- Original Message ----- 
>   From: Simon 
>   To: emax@yahoogroups.com 
>   Sent: Sunday, December 11, 2011 1:52 PM
>   Subject: [emax] Emax II not booting from HD
> 
> 
>     
>   Hi All
> 
>   I have an Emax II which will only boot from floppy, despite setting the boot ID differently in the System.
>   It will happily read the HD and all the banks on it, but will only boot from floppy. 
>   I have tried other HDs but still no joy.. is this likely to be a boot ROM issue?.. can this be easily fixed?..
> 
>   Simon
> 
> 
> 
>   
> 
> [Non-text portions of this message have been removed]
>