Emax

if you left pin 3 disconected how are you getting the angle

also if you took away the backlight connectio how are you getting the 5v for the led

also led displays are much thicker than the original displays

by about 7mm to 9mm thicker


  ----- Original Message ----- 
  From: Mark 
  To: emax@yahoogroups.com 
  Sent: Monday, December 12, 2011 11:44 PM
  Subject: [emax] oled display


    
  just in case anyone is interested I purchased a WEH001602A-Y from rapidonline.com
  i bought a pin header off ebay and soldered it on to the display plugged it in
  and it worked. set me back 25 gbp in total and i didnt have to cut away at anything.
  it just fitted straight in as the dimensions are exactly the same.
  left pin 3 disconnected and desoldered the old backlight connecter and inverter.
  the new display has 16 pins but you just leave 15-16 disconnected.
  I hope this helps anyone wanting to upgrade their screen.
  Thanks to everyone who supplied info before hand.



  

[Non-text portions of this message have been removed]