Emax

OK- so that means the reader is fine.

It is possible there is some incompatibility with the Card or Adapter.
What do you have for those?

Please be as specific as possible - model #s and specs of the media, etc.

Did you use the same SCSI cable with the drive in the Emax as in the PC?


On Wed, Dec 14, 2011 at 1:42 PM, mcnik_k <nikkinloch@...> wrote:

> **
>
>
> Just took the SCSI Card Reader out of the Emax, installed my old SCSI card
> in my PC, attached the reader...
>
> Firmware is 01.28.
>
> Can read and write to the card reader fine when it was on the PC.
>
> Reattached everything to the EMAX.
>
> Still not working :-(
>
> Don't know what else to do.
>
> Could it be the card adapter?
>
> Can anyone throw me a line?
>
>
> --- In emax@yahoogroups.com, Ted Summers <djtbs1@...> wrote:
> >
> > That is the same firmware I have, as far as I can tell (without loading
> it
> > actually into a PC and looking at it).
> >
> > v1.28 is the latest (which is what that is).
> >
> > There is a version of 1.28 that is Read ONLY- that is denoted by "R" in
> the
> > version of firmware that is shown in the updater.
> >
> > You can't see it just looking at the drive in windows device manager,
> IIRC.
> >
> >
>
>  
>


[Non-text portions of this message have been removed]