Emax

If in a keyboard....
The holes for the PCD-50b on the bottom match up with the old floppy, though you need different threaded screws.
From there I made flat metal brackets that attach to the side of the PCD-50b.
Mount the slim floppy on top
the hole distance from the side holes front to back for PCD-50b and slim floppy are the same.
From the holes up and down is .9 inches. 
The slim floppy mounts with 2.6MM screws and use spacers to shore it up.
The 2.6MM screws are available at hobby shops selling RC car parts.
Duratrax sells a baggie that is an assortment.


On Dec 29, 2011, at 6:37 PM, brendanrenne@... wrote:

so I got the floppy drive working, I got the card reader working and everything is great except for the fact that they're just kind of floating around inside my emax 1. Neither device came with mounting hardware, nor do they fit onto the existing plates (the one the original emax 1 hard drive was mounted to and the mounting plate that also houses the pitch bend and mod wheel). Currently I am planning on getting clamps or something and trying to sandwich the floppy between the existing mounting plate and the PCD-50B, but there must be a better way! any advice would be greatly appreciated.





[Non-text portions of this message have been removed]