Emax

yes and no if you dont have one then you need to cut the lcd and the connector so that you can desolder 1 pin at a time

if you want to keep the connector then a desoldering station is required as you need to desolder the pins on the old lcd

as for colour there is only yellow that i know of in the oled versions

if you want blue then vfd will be best but is more work involved and are a little hight in hieght is it going into a rack or keyboard

as a keyboard you can cut holes in the pcb as the traces are directly behind the lcd panel but on the rack they re not and so you can cut o hole for the large piece on the back that stops the vfd from sitting close to the pcb
  ----- Original Message ----- 
  From: freddy1771994 
  To: emax@yahoogroups.com 
  Sent: Saturday, February 04, 2012 3:02 PM
  Subject: [emax] Re: EMAX II Display Problems ....


    
  A display like that ?

  http://www.mostron.de/de/oled-mono/rheinlandpfalz/bachenberg/weh001602c001136.html

  Do I understand it correctly, can I change the colour of the letters?

  Finally, I really need nothing else?

  BTW ... is it necessary to have a desoldering pump?

  Thanks! 



  

[Non-text portions of this message have been removed]