Emax

its a bit different for thew keyboard as all soldering is on the front of the pcb as on the rack its on the back

with the keyboard pcb you need to place the lcd facing you and you can see which pin is which pin

then you solder 1 wire to that pin and then solder the wire to the oled which is the corisponding pin

with a loop of wire you have to do the soldering of this wire from the back of the pcb with the solder on the front of the pcb facing you this needs to be insulated when you fit the

oled panel
  ----- Original Message ----- 
  From: freddy1771994 
  To: emax@yahoogroups.com 
  Sent: Thursday, February 09, 2012 4:40 PM
  Subject: [emax] Re: EMAX II Display Problems ....


    
  Hi,
  sorry it's me again.
  Just for 2 very simple questions:

  I finally bought this: http://www.reichelt.de/LCD-Module-organisch/EA-W162-X3LW/index.html?;ACTION=3;LA=444;GROUP=A526;GROUPID=3012;ARTICLE=113317;START=0;SORT=artnr;OFFSET=75;SID=13Ty6HRn8AAAIAAAQA3HEfc2de5c57b939d52ec7f02b00b4acda7

  Now it is said in jammie emma's description that I have to desolder this old red slider pin box on the pcb. Is that necessary or can I just use the now free holes where the old pins were in? (because I do not own a desoldering pump) (http://www.flickr.com/photos/75453658@N08/6847082909/)

  And just for check; if I'm standing in front of the pcb as if it's mounted in the emax then the old pin order is 
  13 14
  : :
  1 2
  Right? I ask this question because on another website it's different(last post: http://www.gearslutz.com/board/electronic-music-instruments-electronic-music-production/624486-emu-emax-new-display.html)

  Thanks a lot!! This should be my last question....



  

[Non-text portions of this message have been removed]