Emax

I'm just frustrated:

Just say yes or no: http://www.flickr.com/photos/75453658@N08/6847417353/lightbox/

I would like to kick the pcb board out of my window. Just to safe my reputation. I'll go to the university next year and usually english is one of my best subjects but I simply can't handle this description very well...
I know what you want to say but isn't it possible to do it just from the front ?

Sorry, best
Freddy

--- In emax@yahoogroups.com, "jammie" <jammie.emma@...> wrote:
>
> its a bit different for thew keyboard as all soldering is on the front of the pcb as on the rack its on the back
> 
> with the keyboard pcb you need to place the lcd facing you and you can see which pin is which pin
> 
> then you solder 1 wire to that pin and then solder the wire to the oled which is the corisponding pin
> 
> with a loop of wire you have to do the soldering of this wire from the back of the pcb with the solder on the front of the pcb facing you this needs to be insulated when you fit the
> 
> oled panel
>   ----- Original Message ----- 
>   From: freddy1771994 
>   To: emax@yahoogroups.com 
>   Sent: Thursday, February 09, 2012 4:40 PM
>   Subject: [emax] Re: EMAX II Display Problems ....
> 
> 
>     
>   Hi,
>   sorry it's me again.
>   Just for 2 very simple questions:
> 
>   I finally bought this: http://www.reichelt.de/LCD-Module-organisch/EA-W162-X3LW/index.html?;ACTION=3;LA=444;GROUP=A526;GROUPID=3012;ARTICLE=113317;START=0;SORT=artnr;OFFSET=75;SID=13Ty6HRn8AAAIAAAQA3HEfc2de5c57b939d52ec7f02b00b4acda7
> 
>   Now it is said in jammie emma's description that I have to desolder this old red slider pin box on the pcb. Is that necessary or can I just use the now free holes where the old pins were in? (because I do not own a desoldering pump) (http://www.flickr.com/photos/75453658@N08/6847082909/)
> 
>   And just for check; if I'm standing in front of the pcb as if it's mounted in the emax then the old pin order is 
>   13 14
>   : :
>   1 2
>   Right? I ask this question because on another website it's different(last post: http://www.gearslutz.com/board/electronic-music-instruments-electronic-music-production/624486-emu-emax-new-display.html)
> 
>   Thanks a lot!! This should be my last question....
> 
> 
> 
>   
> 
> [Non-text portions of this message have been removed]
>