Emax

yes you can solder to them pins if you want thats your choice

the pin order is usually from behind when your soldering

on the keyboard you solder from the front so that the pin order is backwards

thats why i said place your old lcb on the pcb the numbers are on the front of the lcd

and you will see how the pins are in the sockets

so that you wire correctly
  ----- Original Message ----- 
  From: freddy1771994 
  To: emax@yahoogroups.com 
  Sent: Thursday, February 09, 2012 5:31 PM
  Subject: [emax] Re: EMAX II Display Problems ....


    
  So I'm annoyed now by my comprehension problems.

  It's very kind that jammie emma tries to help me so much, but I guess he's a few levels above my comprehension of microelectronic language.
  I really don't want to annoy you with questions anymore. 

  I will do this now (I don't understand why I have to remove the red pin slider box on the backside) 
  PLEASE look at the link (I will just solder each wire from those points to the right position on the display)

  http://www.flickr.com/photos/75453658@N08/6847316795/lightbox/

  The pin order is right? According to the other forum, it's wrong.
  13 14 ?
  1 2 ?
  [from the position as if it's mount in the keyboard.]

  --- In emax@yahoogroups.com, "jammie" <jammie.emma@...> wrote:
  >
  > yes as its a top solder connection so you will have to hard wire the lcd as the connections are for a side parallel solder connection if you brought the one we said then you would of not have to
  > ----- Original Message ----- 
  > From: freddy1771994 
  > To: emax@yahoogroups.com 
  > Sent: Thursday, February 09, 2012 4:40 PM
  > Subject: [emax] Re: EMAX II Display Problems ....
  > 
  > 
  > 
  > Hi,
  > sorry it's me again.
  > Just for 2 very simple questions:
  > 
  > I finally bought this: http://www.reichelt.de/LCD-Module-organisch/EA-W162-X3LW/index.html?;ACTION=3;LA=444;GROUP=A526;GROUPID=3012;ARTICLE=113317;START=0;SORT=artnr;OFFSET=75;SID=13Ty6HRn8AAAIAAAQA3HEfc2de5c57b939d52ec7f02b00b4acda7
  > 
  > Now it is said in jammie emma's description that I have to desolder this old red slider pin box on the pcb. Is that necessary or can I just use the now free holes where the old pins were in? (because I do not own a desoldering pump) (http://www.flickr.com/photos/75453658@N08/6847082909/)
  > 
  > And just for check; if I'm standing in front of the pcb as if it's mounted in the emax then the old pin order is 
  > 13 14
  > : :
  > 1 2
  > Right? I ask this question because on another website it's different(last post: http://www.gearslutz.com/board/electronic-music-instruments-electronic-music-production/624486-emu-emax-new-display.html)
  > 
  > Thanks a lot!! This should be my last question....
  > 
  > 
  > 
  > 
  > 
  > [Non-text portions of this message have been removed]
  >



  

[Non-text portions of this message have been removed]