Emax

The SE functions are on this panel print.... confirmed the PLUS 1.0 OS only added the feature of "TRANSPOSE" for SCSI ID change.
This isn't on the print, but that doesn't surprise me- it is 1 function for 1 button....

I figured out the LED hole spacings.
I even punched them through on the print (made a little tool).
What I found then was that it is difficult to cut the oval button holes. 
In doing so, you run the risk of damaging the print or making it unsightly.

So what I did was cut at exactly the same angle as the print right at the edge of the button holes below Master.
The IKE says "Part 1, Part 2, etc" on the casing, where the print shows "Master, Sample, Digital Processing", etc.

I then lined up and stuck the sticker, masked off the keyboard keys, vents, buttons, etc- and to protect the print, applied a flat clearcoat spray.

Looks pretty good in my opinion. 

Regards,
Ted



On Mar 7, 2012, at 9:28 AM, Ted Summers wrote:

I dunno if it has 1.0 Plus OS functions- I never looked at it for that.... as far as I know the only thing PLUS OS bought was the ability to use the Transpose key to choose the SCSI ID.
But if the SE functions are on it or not, I can double check that.


I had Kinko's scan in the original and had them print me a sticker and give me the file.
The lettering of the sticker is much brighter than the original.
I have not (as yet) determined the cut-out holes for the LED's but I plan to do that by end of the weekend if not sooner (other projects permitting).

Thanks,
Ted


On Wed, Mar 7, 2012 at 9:05 AM, soundsubs <soundsubs@gmail.com> wrote:
 

Hey Ted--- 
does your sticker reprint include all the functions of the last plus 1.0 OS? 

Did you redo the font or just scan it in and print it? 

-----shane







[Non-text portions of this message have been removed]