Emax

yes if its a hd it has an internal 50 pin scsi copnnector and a 26 pin idc connectorfor adding a 25db scsi cable but you need to punch a hole for the 25db socket

if you fit the pcd-50b you will need a slim floppy drive and convertor 

for every thing to work properly other wise you have to do some jumper wires to disable floppy drive so that it can boot from just a hd
  ----- Original Message ----- 
  From: deanhoner@... 
  To: emax@yahoogroups.com 
  Sent: Sunday, August 26, 2012 11:55 AM
  Subject: [emax] Re: Hard Drive for Emax HD


    
  OK So the PCD-50b is installed in place of the floppy drive and I simply disconnect or remove the Hard Drive internally? 

  The PCD50b is SCSI, are there SCSI connectors inside the EMAX HD or will it need modifying?

  Thanks

  --- In emax@yahoogroups.com, Ted Summers <djtbs1@...> wrote:
  >
  > Get a flash drive like a PCD-50b from mechware.
  > Note only the PC-Card slot works in the drive with the Emax....
  > 
  > Then you can ditch the noise and easily change the media
  > And use EMXP to build up some images.
  > 
  > If you want it internal you can get a slim floppy drive.
  > 
  > See my site for examples
  > 
  > http://djtbs1.wordpress.com/
  > 
  > 
  > On Aug 25, 2012, at 8:15 AM, Dean Honer wrote:
  > 
  > Hi
  > I'm a new member of the forum.
  > I have just bought a nice Emax HD keyboard. It came with no floppies. The
  > hard drive is incredibly noisy and only works intermittently. Are there any
  > replacement hard drives available for the Emax? When working the software
  > and sound banks load up just fine.
  > 
  > Thanks
  > 
  > [Non-text portions of this message have been removed]
  > 
  > 
  > 
  > 
  > 
  > [Non-text portions of this message have been removed]
  >



  

[Non-text portions of this message have been removed]