Emax

i can do it for you

were abouts are you  in the uk
  ----- Original Message ----- 
  From: deanhoner@... 
  To: emax@yahoogroups.com 
  Sent: Monday, August 27, 2012 8:33 PM
  Subject: [emax] Re: Hard Drive for Emax HD


    
  OK thanks for that. Sounds a bit complicated to me...
  Is there anyone in the UK that could sort this out for me? I dont mind paying!

  --- In emax@yahoogroups.com, "jammie" <jammie.emma@...> wrote:
  >
  > yes if its a hd it has an internal 50 pin scsi copnnector and a 26 pin idc connectorfor adding a 25db scsi cable but you need to punch a hole for the 25db socket
  > 
  > if you fit the pcd-50b you will need a slim floppy drive and convertor 
  > 
  > for every thing to work properly other wise you have to do some jumper wires to disable floppy drive so that it can boot from just a hd
  > ----- Original Message ----- 
  > From: deanhoner@... 
  > To: emax@yahoogroups.com 
  > Sent: Sunday, August 26, 2012 11:55 AM
  > Subject: [emax] Re: Hard Drive for Emax HD
  > 
  > 
  > 
  > OK So the PCD-50b is installed in place of the floppy drive and I simply disconnect or remove the Hard Drive internally? 
  > 
  > The PCD50b is SCSI, are there SCSI connectors inside the EMAX HD or will it need modifying?
  > 
  > Thanks
  > 
  > --- In emax@yahoogroups.com, Ted Summers <djtbs1@> wrote:
  > >
  > > Get a flash drive like a PCD-50b from mechware.
  > > Note only the PC-Card slot works in the drive with the Emax....
  > > 
  > > Then you can ditch the noise and easily change the media
  > > And use EMXP to build up some images.
  > > 
  > > If you want it internal you can get a slim floppy drive.
  > > 
  > > See my site for examples
  > > 
  > > http://djtbs1.wordpress.com/
  > > 
  > > 
  > > On Aug 25, 2012, at 8:15 AM, Dean Honer wrote:
  > > 
  > > Hi
  > > I'm a new member of the forum.
  > > I have just bought a nice Emax HD keyboard. It came with no floppies. The
  > > hard drive is incredibly noisy and only works intermittently. Are there any
  > > replacement hard drives available for the Emax? When working the software
  > > and sound banks load up just fine.
  > > 
  > > Thanks
  > > 
  > > [Non-text portions of this message have been removed]
  > > 
  > > 
  > > 
  > > 
  > > 
  > > [Non-text portions of this message have been removed]
  > >
  > 
  > 
  > 
  > 
  > 
  > [Non-text portions of this message have been removed]
  >



  

[Non-text portions of this message have been removed]