Emax

p00 is the defualt program now if you are pressing buttons but nothing 
happens there could be a problem with the keyboard scanner ic chip

this deals with the scanning of the keyboard and all buttons and led control

if it fails you basically cant do anything

have you checked that the ribboncable is seated correctly
----- Original Message ----- 
From: "Tony Court" <anthony.court@...>
To: <emax@yahoogroups.com>
Sent: Friday, October 05, 2012 9:02 PM
Subject: Re: [emax] Re: New Emax II user


> Thanks for your reply... so, if I'm using the correct OS for the Emax II
> (2.14), any idea why none of the buttons are responsive and all I can get
> after booting from floppy is the default P00 Untitled?
>
> On Fri, Oct 5, 2012 at 12:57 PM, jammie 
> <jammie.emma@...>wrote:
>
>> **
>>
>>
>> sorry i miss understood i thought you were talking about a emax1
>>
>> no the emax 2 os is fine
>>
>> ----- Original Message -----
>> From: "Tony Court" <anthony.court@...>
>> To: <emax@yahoogroups.com>
>> Sent: Friday, October 05, 2012 8:31 PM
>> Subject: Re: [emax] Re: New Emax II user
>>
>> > But (and I may just not understand things correctly as this is my first
>> > Emax II) NONE of the buttons are responsive.
>> >
>> > I currently have JUST the floppy and external Zip 100 connected (for
>> > testing), no CF, no internal HD. With no floppy in the drive, it cycles
>> > through 'Checking SCSI 1-7 but does not boot. With the floppy inserted
>> (OS
>> > 2.14) it boots up and displays P00 Untitled, the enter button flashes,
>> and
>> > none of the buttons are responsive.
>> >
>> > Are you saying that if I make another OS floppy disk using EMXP and the
>> > emaxplus10.zip from the groups files section, it should boot to the
>> 'plus'
>> > OS, the buttons will become responsive, and I can then manually select 
>> > to
>> > load sounds from the external zip drive? (SCSI 5)
>> >
>> > On Fri, Oct 5, 2012 at 12:19 PM, jammie
>> > <jammie.emma@...>wrote:
>> >
>> >> **
>>
>> >>
>> >>
>> >> you need the plus os to change scsi id
>> >>
>> >> otherwise it will only see scsi id0 which if you connected the cf 
>> >> drive
>> >> right that willbe scsi id 0
>> >>
>> >> ----- Original Message -----
>> >> From: Tony Court
>> >> To: emax@yahoogroups.com
>> >> Sent: Friday, October 05, 2012 7:54 PM
>> >> Subject: Re: [emax] Re: New Emax II user
>> >>
>> >> so - I have the new slim floppy and CF drives installed......
>> >>
>> >> I load the OS from floppy (it's the first time I've seen it load), and 
>> >> I
>> >> now get on my screen 'P00 Untitled' and the enter light is flashing.
>> >>
>> >> I have attached my SCSI Zip100 drive with some Emax II sounds on those
>> >> disks, but I can't seem to select the drive ('Drive Select' button 
>> >> does
>> >> nothing). It's definitely a SCSI zip (it has the 5/6 selector and the
>> >> termination switch).
>> >>
>> >> Any ideas how to load the sounds from the SCSI zip drive?
>> >>
>> >> On Fri, Oct 5, 2012 at 10:12 AM, Tony Court <anthony.court@...>
>> >> wrote:
>> >>
>> >> > Thanks Ted - JM-215A mods completed..... time to fabricate some
>> >> > brackets
>> >> > and get everything in place :)
>> >> >
>> >> >
>> >> > On Thu, Oct 4, 2012 at 10:08 PM, Ted Summers <djtbs1@...>
>> wrote:
>> >> >
>> >> >> The screwholes on the bottom of the PCD drive match the original
>> >> >> floppy
>> >> >> exactly.
>> >> >> However, the thread is different, if I recall.
>> >> >> For mounting you get some flat metal and drill the holes.
>> >> >> The holes front to back are the same for slim and PCD.
>> >> >> The distance is .9 inches up, center to center of the holes on the
>> >> >> side
>> >> >> of the PCD drive.
>> >> >>
>> >> >> Slim floppy drives use 2.6MM screws.
>> >> >> They are used in RC cars also.
>> >> >> Duratrax makes a kit of screws.
>> >> >> Use the shortest screws on the front.
>> >> >> If they are put in too far, they will make the disk appear out of
>> >> >> alignment and you will get CRC errors and the disk may not easily
>> >> >> eject.
>> >> >> So use 3 washers on the outside of the metal bracket to keep the
>> >> >> screws
>> >> >> from going in too far.
>> >> >>
>> >> >> As to spacers- use some washers or fab them from metal or nylon or
>> use
>> >> >> some small nuts.
>> >> >>
>> >> >> There isn't anything pre-made for it- you just have to fabricate 
>> >> >> it.
>> >> >>
>> >> >>
>> >> >>
>> >> >>
>> >> >>
>> >> >> On Oct 4, 2012, at 9:23 PM, Tony Court wrote:
>> >> >>
>> >> >> So..... I now have all the parts required for the slim floppy and 
>> >> >> cf
>> >> >> upgrade, including a 2nd JM-215A (just in case!). Hopefully I'll 
>> >> >> get
>> a
>> >> >> chance to complete this upgrade tomorrow.
>> >> >>
>> >> >> Do you have any recommendations for how to position and secure both
>> >> >> drives? The Teac floppy drive is narrower than the PCD-50B. All the
>> >> pics on
>> >> >> Teds website show the floppy on top. How are they secured to each
>> >> >> other
>> >> and
>> >> >> then to the original floppy drive mounting?
>> >> >>
>> >> >> Thanks
>> >> >>
>> >> >> Tony
>> >> >>
>> >> >> Sent from my iPhone
>> >> >>
>> >> >> On Sep 27, 2012, at 22:29, Ted Summers <djtbs1@...> wrote:
>> >> >>
>> >> >> > TEAC FD-05 for slim floppy- check ebay.
>> >> >> > JM-215A to convert it for use with Emax
>> >> >> > Instructions for modification at my website.
>> >> >> > PCD-50b using the PC- Card slot for whatever flash media you
>> choose.
>> >> >> > 32MB flash media.
>> >> >> >
>> >> >> > Again- see my website.
>> >> >> > http://djtbs1.wordpress.com/
>> >> >> >
>> >> >> >
>> >> >> > On Sep 27, 2012, at 8:45 PM, sofad_1999 wrote:
>> >> >> >
>> >> >> > any idea where to purchase them from/instructions/part numbers 
>> >> >> > etc?
>> >> I'm
>> >> >> confident I can do the work, just unsure what parts to get and how 
>> >> >> to
>> >> >> install.
>> >> >> >
>> >> >> > thanks again
>> >> >> >
>> >> >> > --- In emax@yahoogroups.com, "jammie" <jammie.emma@...> wrote:
>> >> >> >>
>> >> >> >> i would not bother that get your self a slimfloppy and cf drive
>> >> >> >>
>> >> >> >> the costing wont be much different
>> >> >> >> ----- Original Message -----
>> >> >> >> From: Tony Court
>> >> >> >> To: emax@yahoogroups.com
>> >> >> >> Sent: Thursday, September 27, 2012 9:57 PM
>> >> >> >> Subject: Re: [emax] New Emax II user
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >> I had already tried a floppy boot with the HD disconnected :(
>> >> >> >>
>> >> >> >> I'm going to take the plunge and order a new floppy drive from
>> >> >> route66studios and see if that fixes things.
>> >> >> >>
>> >> >> >> I'll report back when I've tested it :)
>> >> >> >>
>> >> >> >> Thanks again for your help.
>> >> >> >>
>> >> >> >> Tony
>> >> >> >>
>> >> >> >> On Sep 27, 2012, at 9:55, "jammie" <jammie.emma@...> wrote:
>> >> >> >>
>> >> >> >>> sounds like you got a dud floppy drive and a bad scsi drive
>> >> >> >>>
>> >> >> >>> as the person who owned it before if there was a scsi drive
>> would
>> >> >> >>> of
>> >> >> definetly put the os on it
>> >> >> >>>
>> >> >> >>> have you tried removing the scsi cable
>> >> >> >>>
>> >> >> >>> and seeing if the floppy will boot as the hard drive could be 
>> >> >> >>> on
>> >> >> constant seek which would stop the floppy drive from booting
>> >> >> >>> ----- Original Message -----
>> >> >> >>> From: Tony Court
>> >> >> >>> To: emax@yahoogroups.com
>> >> >> >>> Sent: Thursday, September 27, 2012 5:50 PM
>> >> >> >>> Subject: Re: [emax] New Emax II user
>> >> >> >>>
>> >> >> >>> So..... I have cleaned the floppy drive and tried again with 
>> >> >> >>> both
>> >> the
>> >> >> OS floppy in (the original E-mu disk and the 2 I made using emxp), 
>> >> >> I
>> >> also
>> >> >> tried with no floppy disk inserted (but the floppy drive still
>> >> connected)
>> >> >> to see if it would boot from HD.
>> >> >> >>>
>> >> >> >>> Unfortunately I still get exactly the same errors. Both the
>> floppy
>> >> >> and the hard drive are clicking/spinning up, so they have power.
>> >> >> >>>
>> >> >> >>> I was aware that the floppies needed to be DD, not HD, and
>> covered
>> >> up
>> >> >> the relevant holes.
>> >> >> >>>
>> >> >> >>> Is there a way to confirm that SCSI is working? Could that be 
>> >> >> >>> the
>> >> >> issue? Or should I go for a replacement floppy drive? I'm a bit 
>> >> >> stuck
>> >> now :(
>> >> >> >>>
>> >> >> >>> I look forward to your replies!
>> >> >> >>>
>> >> >> >>> Tony
>> >> >> >>>
>> >> >> >>> On Sep 25, 2012, at 7:51, Ted Summers <djtbs1@...> wrote:
>> >> >> >>>
>> >> >> >>>> Emax 1 / 2 requires the floppy drive to be attached.
>> >> >> >>>> You can't not have a floppy drive unless you jumper the floppy
>> >> >> connector-
>> >> >> >>>> that will definitely prevent a successful boot.
>> >> >> >>>> As to the floppy, you can create a new one with EMX (DOS) or
>> EMXP
>> >> >> utilities
>> >> >> >>>> and try and boot from it.
>> >> >> >>>> You may wish to use this existing floppy as it was probably
>> >> >> formatted by
>> >> >> >>>> Emax initially and write the OS to it with one of the 
>> >> >> >>>> utilities.
>> >> >> >>>>
>> >> >> >>>> Also, please note that Emax uses DSDD not DSHD disks.
>> >> >> >>>> So you have to use either DSDD or cover the hole which 
>> >> >> >>>> indicates
>> >> >> >>>> High-density disk.
>> >> >> >>>>
>> >> >> >>>> or you can also buy an Emax OS floppy disk off ebay if the 
>> >> >> >>>> above
>> >> >> doesn't
>> >> >> >>>> work for you.
>> >> >> >>>>
>> >> >> >>>> Regards,
>> >> >> >>>> Ted
>> >> >> >>>>
>> >> >> >>>> On Tue, Sep 25, 2012 at 7:38 AM, Tony Court 
>> >> >> >>>> <anthony.court@...>
>> >> >> wrote:
>> >> >> >>>>
>> >> >> >>>>> Hi Jammie and thanks for the info.
>> >> >> >>>>>
>> >> >> >>>>> I'm sure at some stage during my testing I tried just the HD
>> >> >> connected and
>> >> >> >>>>> was getting the same issue..... I will test again tonight and
>> >> >> >>>>> let
>> >> >> you know.
>> >> >> >>>>>
>> >> >> >>>>> If the HD does not have the OS installed, and the Floppy 
>> >> >> >>>>> drive
>> >> >> >>>>> is
>> >> >> fried....
>> >> >> >>>>> do you have any recommendations on how to get the OS onto the
>> >> >> >>>>> HD?
>> >> I
>> >> >> >>>>> currently have no way of connecting the 50-pin SCSI to my
>> >> computer,
>> >> >> but am
>> >> >> >>>>> willing to purchase PCI-E cards etc if the price is right ;)
>> >> >> >>>>>
>> >> >> >>>>> Thanks again for your help so far and I'll let you know about
>> >> >> >>>>> the
>> >> >> OS on the
>> >> >> >>>>> HD when I get home tonight.
>> >> >> >>>>>
>> >> >> >>>>> I also have a zip100 drive that I have yet to play with, and 
>> >> >> >>>>> 2
>> >> >> >>>>> zip
>> >> >> disks
>> >> >> >>>>> full of sounds. Not sure if the OS might be on one of the zip
>> >> disks
>> >> >> as
>> >> >> >>>>> well?
>> >> >> >>>>>
>> >> >> >>>>> Tony
>> >> >> >>>>>
>> >> >> >>>>> On Mon, Sep 24, 2012 at 11:57 PM, jammie <jammie.emma@...
>> >> >> >>>>>> wrote:
>> >> >> >>>>>
>> >> >> >>>>>> **
>> >> >> >>>>>>
>> >> >> >>>>>>
>> >> >> >>>>>> if it has an internal drive that should have the os on it 
>> >> >> >>>>>> and
>> >> >> should boot
>> >> >> >>>>>> from the hd
>> >> >> >>>>>>
>> >> >> >>>>>> dont put a disk in the floppydrive and just have the hd load
>> os
>> >> >> >>>>>>
>> >> >> >>>>>> disk not formated means that the floppy drive is being seen
>> and
>> >> is
>> >> >> doing
>> >> >> >>>>> a
>> >> >> >>>>>> floppy read when it comes up as not formated its either a 
>> >> >> >>>>>> bad
>> >> disk
>> >> >> or the
>> >> >> >>>>>> floppy drive is shot
>> >> >> >>>>>>
>> >> >> >>>>>> do try the cleaning kit first as it can just need a good 
>> >> >> >>>>>> clean
>> >> >> >>>>>>
>> >> >> >>>>>> which i have had todo on a number of old floppy drives
>> >> >> >>>>>>
>> >> >> >>>>>> none of the buttons will be functional until the os is 
>> >> >> >>>>>> present
>> >> >> >>>>>>
>> >> >> >>>>>>
>> >> >> >>>>>> ----- Original Message -----
>> >> >> >>>>>> From: sofad_1999
>> >> >> >>>>>> To: emax@yahoogroups.com
>> >> >> >>>>>> Sent: Tuesday, September 25, 2012 5:59 AM
>> >> >> >>>>>> Subject: [emax] New Emax II user
>> >> >> >>>>>>
>> >> >> >>>>>> Hi all,
>> >> >> >>>>>>
>> >> >> >>>>>> I just got a cheap Emax II 2212 model, and am currently
>> >> >> >>>>>> wondering
>> >> >> if it
>> >> >> >>>>>> wasn't such a good deal after all....
>> >> >> >>>>>>
>> >> >> >>>>>> FYI - It has a 250mb Apple SCSI drive inside, and the 
>> >> >> >>>>>> original
>> >> SCSI
>> >> >> >>>>> floppy
>> >> >> >>>>>> drive.
>> >> >> >>>>>>
>> >> >> >>>>>> I have the original 2.14 OS disk, and I have also created
>> >> >> additional 2.14
>> >> >> >>>>>> OS disks using EMXP
>> >> >> >>>>>>
>> >> >> >>>>>> When I power on the Emax II with the OS floppy disk in the
>> >> >> >>>>>> drive
>> >> I
>> >> >> get
>> >> >> >>>>> the
>> >> >> >>>>>> following messages:
>> >> >> >>>>>>
>> >> >> >>>>>> Checking Floppy
>> >> >> >>>>>>
>> >> >> >>>>>> Loading Software
>> >> >> >>>>>>
>> >> >> >>>>>> Disk Not Formatted
>> >> >> >>>>>>
>> >> >> >>>>>> and then a loop of Loading Software/Disk Not Formatted
>> >> >> >>>>>>
>> >> >> >>>>>> I can hear the floppy drive clicking every 10-15 seconds. I
>> get
>> >> red
>> >> >> >>>>> lights
>> >> >> >>>>>> on STOP and RECORD.
>> >> >> >>>>>>
>> >> >> >>>>>> None of the buttons are functional.
>> >> >> >>>>>>
>> >> >> >>>>>> I have tried disconnecting the internal Hard Drive to see if
>> >> >> >>>>>> that
>> >> >> makes a
>> >> >> >>>>>> difference and nothing changes. I have also tried
>> disconnecting
>> >> the
>> >> >> >>>>> Floppy
>> >> >> >>>>>> to see if it will boot from the HD, and again nothing.
>> >> >> >>>>>>
>> >> >> >>>>>> Can anyone point me in the right direction as to what may be
>> >> >> >>>>>> the
>> >> >> problem?
>> >> >> >>>>>> I have a floppy drive cleaning kit on order, just in case...
>> >> >> >>>>>> and
>> >> am
>> >> >> >>>>>> prepared to splash out on a new floppy drive if that is
>> >> definitely
>> >> >> the
>> >> >> >>>>>> problem.
>> >> >> >>>>>>
>> >> >> >>>>>> Thanks
>> >> >> >>>>>>
>> >> >> >>>>>> Tony
>> >> >> >>>>>>
>> >> >> >>>>>> [Non-text portions of this message have been removed]
>> >> >> >>>>>>
>> >> >> >>>>>>
>> >> >> >>>>>>
>> >> >> >>>>>
>> >> >> >>>>>
>> >> >> >>>>> [Non-text portions of this message have been removed]
>> >> >> >>>>>
>> >> >> >>>>>
>> >> >> >>>>>
>> >> >> >>>>> ------------------------------------
>> >> >> >>>>>
>> >> >> >>>>> Emax and Emax II User's Group Website
>> >> >> >>>>>
>> >> >> >>>>> http://www.silveriafamily.comYahoo! Groups Links
>> >> >> >>>>>
>> >> >> >>>>>
>> >> >> >>>>>
>> >> >> >>>>>
>> >> >> >>>>
>> >> >> >>>> [Non-text portions of this message have been removed]
>> >> >> >>>>
>> >> >> >>>>
>> >> >> >>>
>> >> >> >>> [Non-text portions of this message have been removed]
>> >> >> >>>
>> >> >> >>> [Non-text portions of this message have been removed]
>> >> >> >>>
>> >> >> >>>
>> >> >> >>
>> >> >> >> [Non-text portions of this message have been removed]
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >> [Non-text portions of this message have been removed]
>> >> >> >>
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> > [Non-text portions of this message have been removed]
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> > ------------------------------------
>> >> >> >
>> >> >> > Emax and Emax II User's Group Website
>> >> >> >
>> >> >> > http://www.silveriafamily.comYahoo! Groups Links
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >>
>> >> >>
>> >> >>
>> >> >>
>> >> >> [Non-text portions of this message have been removed]
>> >> >>
>> >> >>
>> >> >>
>> >> >> ------------------------------------
>> >> >>
>> >> >> Emax and Emax II User's Group Website
>> >> >>
>> >> >> http://www.silveriafamily.comYahoo! Groups Links
>> >> >>
>> >> >>
>> >> >>
>> >> >>
>> >> >
>> >>
>> >> [Non-text portions of this message have been removed]
>> >>
>> >> [Non-text portions of this message have been removed]
>> >>
>> >>
>> >>
>> >
>> >
>> > [Non-text portions of this message have been removed]
>> >
>> >
>> >
>> > ------------------------------------
>> >
>> > Emax and Emax II User's Group Website
>> >
>> > http://www.silveriafamily.comYahoo! Groups Links
>> >
>> >
>> >
>>
>>
>>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Emax and Emax II User's Group Website
>
> http://www.silveriafamily.comYahoo! Groups Links
>
>
>