Emax

and that is cheap if you try and buy the chips seperate they will cost you 
more the tim pal chip you have to burn your self

the cheapest i could get the scsi chips was in quantities of 50+ @\ufffd15 each 
which is mega if you only want 1

you still need to do the wire mods and trace cuts to get it to work

as the tim pal has the extra logic for the scsi interface but the mother 
board still has not the traces for the scsi to work so it will not be a plug 
and play option

you might be lucky that they fitted the larger socket as they did on some of 
the later revision boards
----- Original Message ----- 
From: "Ted Summers" <djtbs1@...>
To: <emax@yahoogroups.com>
Sent: Sunday, October 21, 2012 4:59 AM
Subject: Re: [emax] Re: Emuser & RS-232


>I only sell the kit as a whole.
>
> The kit is $60 USD including shipping.
>
> I take paypal: djtbs1@...
>
> Regards,
> Ted
>
> On Oct 20, 2012, at 5:26 PM, emax1user wrote:
>
> Thanks Ted. I opened up my Emax today and found that I have the PC327 
> version 2 rev C board with a SCSI-capable TIM PAL (IP356). I don't have a 
> 5380 and my EPROM is IP349. Are you selling any parts?
>
> --- In emax@yahoogroups.com, Ted Summers <djtbs1@...> wrote:
>>
>> The EMuSer is a custom device just for Emax amd I think Emulator 2???
>>
>> Additionally- Emax does use RS422.
>> That is why a custom box needs built because a standard PC RS-232 port 
>> doesn't work.
>>
>> If you have any questions regarding getting SCSI, let me know.
>> I am "the guy" for that.
>>
>> My Emax SCSI related page:
>> http://djtbs1.wordpress.com/
>>
>> Regards,
>> Ted Summers
>> Group Moderator
>>
>>
>> On Oct 19, 2012, at 10:24 AM, emax1user wrote:
>>
>> Hi, noob here but I'm interested in building an Emuser for my newly 
>> acquired Emax 1 keyboard. I haven't had the time to crack open the case 
>> and examine the PCBs to see what version. However, it is a non-HD model.
>>
>> The main question I have before buying the parts is:
>>
>> The port on the back of my Emax says RS-232, not RS-422, will this still 
>> work with the Emuser? Or am I out of luck?
>>
>>
>>
>>
>>
>> [Non-text portions of this message have been removed]
>>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Emax and Emax II User's Group Website
>
> http://www.silveriafamily.comYahoo! Groups Links
>
>
>