Emax

My scsi zip is using 5 or 6, with same known problem.
Anybody knows if it's possible replace the eeprom or not.
On 2012-12-18 1:37 PM, "dwv1957" <dwv1957@...> wrote:

> **
>
>
> You cannot use ID7, 7 is the address of the scsi controller, set it to
> something between 1 and 6 and it should be fine (0 is the floppy)
>
> Dave
>
> --- In emax@yahoogroups.com, Francis Cote wrote:
>
> I have the same annoying issue. Is this EEPROM replaceable?
> On 2012-12-18 12:10 PM, "Simon" wrote:
>
> **
>
>
> Hi Guys.. I posted this up a while ago, but am looking for a solution here
>
> The Emax boots from floppy, but when I try to assign it to boot from an
> internal SCSI drive (ID7) it says it saves the setting but still searches
> for the floppy on bootup.
>
> The settings appear to be saved as it is still set to ID 7 when you go
> back into boot ID settings but the Emax still insists on a floppy being
> inserted to boot
> The Emax should be able to boot from any ID right?..
>
> Is this likely a failing of the EEPROM at IC24?..
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>  
>


[Non-text portions of this message have been removed]