I've tried sampling thru mixer instead, with emax output muted so no feedback possible (but emax doesnt seem to output when in Vu mode or while sampling) soundcard outputs are -10dB into mixer into emax. the crap is still there. can someone tell me if emax could generate this kinda digital sound if some kind of converter problem. and can you confirm that there is no possible way of monitoring the emax input? I found a solution to the flanged sound tho, setting up the midi to poly instead of omni and changing the midi basic channel to something else. That is quite obscure and involve a weird behavior of my nord stage as master keyboard, i wont go to long on that, i can explain what i found if someone runs into the same problem, but now my problem is 'just' about that digital noise. thanks --- In emax@yahoogroups.com, "jammie" wrote: > > yes that would cause the chorus fx as its a delayed version > > and will be out of phase this will also cause frequencies to be removed and will give you a dirty muffled noisy sound > ----- Original Message ----- > From: Nik Kinloch > To: emax@yahoogroups.com > Cc: papluss > Sent: Tuesday, January 15, 2013 10:59 AM > Subject: Re: [emax] Re: bad sound > > > > Are you monitoring back through the soundcard? Sounds like the output is > getting fed back into the input. > > On 15/01/2013 10:48, papluss wrote: > > Ok > > I have bypassed the headphone amp, made the signal hotter into emax. > > Sounds perhaps a bit better. (uploaded try2: https://soundcloud.com/paplusse/sets/emax-sampling-noise-problem) > > I know it sounds like a digital noise, but I can't hear it from the RME UFX soundcard. It is very clear when i stop the playback early and keep emax sampling, then when emax stops sampling the noise stops (the recording carries on a little) > > Also at the begining i retriggered the sample to make you hear the nearly flanged type sound i get, with slightly different sound on every trigger. > > At first i though the chorus was on or that the sample was on 2 voices playing together, but chorus is off, and i don't master yet the emax 2 voice architecture, but on a menu quick tour, i couldn't see anything abnormal. > > Could the emax generate that digital noise? Would that be AD/DA conversion problem? > > How do you guys monitor your emax input? > > Thanks for your time guys. > > > > dave > > > > --- In emax@yahoogroups.com, krikor kouchian wrote: > >> yes i didn't see that > >> sure don't use the headphone amp to sample in the emax! > >> > >> Le mardi 15 janvier 2013, Human Being a �crit : > >>> Take the headphone amp out of the equation and post the results. I would > >> guess that is what's raising your noise floor. > >>> On Jan 15, 2013, at 1:18 AM, monsieur escargot wrote: > >>> > >>>> I've uploaded the original file now. yes it is off the computer, > >> unmastered > >>>> drum session bit. > >>>> the gain was set to 0dB on the emax and its Vumeter was going over half > >>>> way. I had tried it hotter, but worse results, and i made sure i was > >>>> sending mono signal and i checked the audio cable. > >>>> It doesnt do it with the few samples on disk supplied with the rack. > >>>> > >>>> for the gain stagging, is it correct that you can't audition what you are > >>>> sampling through the emax? only the result once you trigger it? I send > >>>> signal to emax though an headphone amp which can mono and monitor thru > >> the > >>>> other channels either on headphones or mixer. Can't see what im doing > >> wrong > >>>> with gain staging, but in a way i hope it is me and not the machine! > >>>> > >>>> thanks > >>>> dave > >>>> > >>>> On Tue, Jan 15, 2013 at 9:12 PM, Human Being abigblackwave@ > >>> wrote: > >>>>> Honestly, it sounds like you were sampling something off of your > >> computer > >>>>> and didn't utilize proper gain staging. > >>>>> > >>>>> On Jan 14, 2013, at 9:34 PM, papluss wrote: > >>>>> > >>>>>> hi. > >>>>>> first sampling on my 'new' emax1. And it sounds like there is > >> something > >>>>> wrong with it. > >>>>>> Would you be able to direct me towards the problem by hearing those > >>>>> samples i made? > >>>>>> https://soundcloud.com/paplusse/sets/emax-sampling-noise-problem > >>>>>> > >>>>>> thanks guys! > >>>>>> dave > >>>>>> > >>>>>> > >>>>> > >>>>> > >>>>> [Non-text portions of this message have been removed] > >>>>> > >>>>> > >>>>> > >>>>> ------------------------------------ > >>>>> > >>>>> Emax and Emax II User's Group Website > >>>>> > >>>>> http://www.silveriafamily.comYahoo! Groups Links > >>>>> > >>>>> > >>>>> > >>>>> > >>>> -- > >>>> Monsieur E. > >>>> dave at mamakuproject dot com > >>>> mamakuproject dot com > >>>> youtube dot com/mamakuproject > >>>> NZ:+64 (0)273214581 > >>>> France: +33 (0)675322709 > >>>> > >>>> [Non-text portions of this message have been removed] > >>>> > >>>> > >>> > >>> > >>> [Non-text portions of this message have been removed] > >>> > >>> > >>> > >>> ------------------------------------ > >>> > >>> Emax and Emax II User's Group Website > >>> > >>> http://www.silveriafamily.comYahoo! Groups Links > >>> > >>> > >>> > >>> > >> -- > >> http://www.krikor.fr > >> +33632199413 > >> > >> bookings: > >> France/Suisse/Benelux: fanyktdj@ > >> World: laetitia@ > >> > >> > >> [Non-text portions of this message have been removed] > >> > > > > > > > > ------------------------------------ > > > > Emax and Emax II User's Group Website > > > > http://www.silveriafamily.comYahoo! Groups Links > > > > > > > > > > > > [Non-text portions of this message have been removed] >
Message
Re: bad sound
2013-01-15 by papluss