Emax

no. I don't have a picture.
but I basically put the slim floppy on top of the media drive.
Measured from top to bottom the made it a quarter inch shorter height-wise.
Front to back I made it about 3/4 an inch longer than the holes are.

Then figured out the placement for the holes for the media drive first,
then the slim floppy from there (.9 inches upwards).



On Tue, Jan 22, 2013 at 1:11 PM, krikor kouchian <krikorola@...>wrote:

> **
>
>
> I will take a pict of the reader with the card and send it to you regarding
> the pc card.
> would you have a pict of the brackets?
>
> best
> K
>
> 2013/1/22 Ted Summers djtbs1@...>
>
>
> > Yes - let us know regards PCB-60B.
> > Especially if the PC Card doesn't stick out.
> >
> > As to the slim floppy on the top- simple.
> >
> > For rack I modify the existing bracket on one side and the other side I
> > fabricate an add on bracket.
> >
> > For Keyboard, I get two flat pieces of metal.
> > drill holes in the side to mount to the sides of the 3.5" media drive.
> > The holes line up from to back.
> > So then you just have to do the measurement from top to bottom and add
> some
> > small spacers to center the floppy drive on top of the other one.
> >
> > if I recall correctly it is .9 inches from the side hole on media drive
> in
> > the upwards direction to drill the holes for the slim floppy mounting.
> >
> > The slim floppy uses 2.6mm screws- but I don't know the length exactly.
> > I can tell you that if the length of the 2.6mm screws are too long on the
> > front, the floppy won't eject properly and also can cause the drive to
> not
> > read the disk properly (therefore causing emax not to boot).
> >
> > Fix the length problem, and the same disk will boot it ok.
> >
> >
> > On Tue, Jan 22, 2013 at 12:51 PM, krikor kouchian krikorola@...
> > >wrote:
> >
> > > **
>
> > >
> > >
> > > Hi,
> > >
> > > i'm working on my emax to get the slim floppy in, but i was wondering
> how
> > > you guys made it stay on top of the Scsi card reader? it's a bit thiner
> > and
> > > i don't see how i can do it except by gluing it to the top of the Card
> > > reader.
> > >
> > > Also i ordered a PCD-60b as replacement, it fits and looks exactly the
> > > same, except for the bezel that i need to dremel a bit.
> > > I haven't tested it yet, i will report as soon as i do, i noticed that
> > the
> > > pcmcia adaptor doesn't stick out like on the 50b version, so if it
> works
> > > that would be a better solution as they are cheaper on ebay those days.
> > >
> > > Best
> > > K
> > >
> > > http://www.krikor.fr
> > > +33632199413
> > >
> > > bookings:
> > > France/Suisse/Benelux: fanyktdj@...
> > > World: laetitia@decked-out.co.uk
> > >
> > > [Non-text portions of this message have been removed]
> > >
> > >
> > >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > ------------------------------------
>
> >
> > Emax and Emax II User's Group Website
> >
> > http://www.silveriafamily.comYahoo! Groups Links
>
> >
> >
> >
> >
>
> [Non-text portions of this message have been removed]
>
>  
>


[Non-text portions of this message have been removed]