Emax

If you don´t wanna spend money first try  reseating IC´s on a garbage circuit board. Same opinion as Ted....i had the same event on my EMax, finally resolved by this way.
good luck hunting the IC.


--- In emax@yahoogroups.com, "peccisteve" <peccisteve@...> wrote:
>
> I forgot to mention I'm not into electronics at all, so I wouldn't risk myself inside the Emax... Tha would make things worse! Any idea who could help me out?
> 
> --- In emax@yahoogroups.com, Ted Summers <djtbs1@> wrote:
> >
> > Start by reseating your ICs and the connectors to the main logic board.
> > 
> > 
> > On Thu, Feb 28, 2013 at 2:26 PM, peccisteve <peccisteve@> wrote:
> > 
> > > **
> > >
> > >
> > > Hi there!
> > >
> > > I'm having some trouble with my recently acquired Emax II Keyboard.
> > >
> > > When powered up, LED's for Transpose, Drive Select and Dynamic Processing
> > > remain on. After a few seconds, Transpose turns off, but the two other
> > > LED's are still on and the unit doesn't completely boot. Furthermore, the
> > > LCD show no letters at all, just a black stripe on the first line.
> > >
> > > What can I do to get the unit working again?
> > >
> > > P.S. Here are some pictures of the Emax when powering up.
> > >
> > > http://img4.hostingpics.net/pics/730991Picture3.jpg
> > >
> > > http://img4.hostingpics.net/pics/139651Picture2.jpg
> > >
> > >  
> > >
> > 
> > 
> > [Non-text portions of this message have been removed]
> >
>