Emax

Yes, I replied to this last night so I am not sure why it did not post.  I
apologize for the delay but my wife and I recently had our second son (2
weeks early) so I have been a bit busy.  I did test the pcd-60b on my Emax
I and II and they both worked fine.  One thing to note about the Emax I is
that it must be running SE (at least this is the case in the 2 units that I
upgraded.). Also, I have 3 different models of PCMCIA card adapters. 2 of
them say "type II" on them.  The other says nothing and it would not fit
into the slot properly as one side had a slightly thicker plastic mould.  I
shaved off some plastic with an exacto knife and managed to get it to fit
ok but, even though the SCSI seemed to be recognized, the card itself could
not be accessed.  Only the type II pcmcia adapters seem to work for me.  If
anyone knows of where to acquire PCMCIA type II sd (not compact flash)
adapters, I would be interested.

Regards,

-Scott

On 2013-03-13, at 12:32 PM, dutchbeats <dutchbeats@...> wrote:



was hoping this might be of interest but i tried to use a pcd-50b with my
e-mu eiiix sampler and i don't think it works. no matter what jumper
settings i try it hangs at startup cycling through scsi id numbers

months ago i had an acard/cf drive combo that did work with it, so if i
can't get the pcd to work i'll have to get another acard

--- In emax@yahoogroups.com, Krikor Kouchian <krikorola@...> wrote:
>
> It's installed but I could not test it yet, as my emax is still not
operational due to the lack of a floppy OS (I got hold of a pc with an
internal floppy drive to write new ones just today), It will be hopefully
next week, I will report then.
>
> http://www.krikor.fr
> +33632199413
>
> Booking dj & live: cedric@...
>
> Le 5 mars 2013 � 19:32, Scott Stanley <scartattack@...> a �crit :
>
> > I can test it. It works on my e6400 and esynth. I'll try it on my Emax I
> > and II and get back to you.
> >
> > -s*
> >
> > On 2013-03-05, at 12:19 PM, Ted Summers <djtbs1@...> wrote:
> >
> >
> >
> > I have never had confirmation on this drive working or not.
> >
> > Can someone confirm it works or doesn't?
> >
> > Thanks,
> > Ted
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > ------------------------------------
> >
> > Emax and Emax II User's Group Website
> >
> > http://www.silveriafamily.comYahoo! Groups Links
> >
> >
> >
>
>
> [Non-text portions of this message have been removed]
>

 


[Non-text portions of this message have been removed]