Emax

Congrats!

and thanks for the update.

I always use a 5 in 1 or 6 in 1 adapter in the PC Card slot.
Dazzle works OK.
Also, MCR-5A works ok.



On Wed, Mar 13, 2013 at 9:47 AM, Scott Stanley <scartattack@...>wrote:

> Yes, I replied to this last night so I am not sure why it did not post.  I
> apologize for the delay but my wife and I recently had our second son (2
> weeks early) so I have been a bit busy.  I did test the pcd-60b on my Emax
> I and II and they both worked fine.  One thing to note about the Emax I is
> that it must be running SE (at least this is the case in the 2 units that I
> upgraded.). Also, I have 3 different models of PCMCIA card adapters. 2 of
> them say "type II" on them.  The other says nothing and it would not fit
> into the slot properly as one side had a slightly thicker plastic mould.  I
> shaved off some plastic with an exacto knife and managed to get it to fit
> ok but, even though the SCSI seemed to be recognized, the card itself could
> not be accessed.  Only the type II pcmcia adapters seem to work for me.  If
> anyone knows of where to acquire PCMCIA type II sd (not compact flash)
> adapters, I would be interested.
>
> Regards,
>
> -Scott
>
> On 2013-03-13, at 12:32 PM, dutchbeats <dutchbeats@...> wrote:
>
>
>
> was hoping this might be of interest but i tried to use a pcd-50b with my
> e-mu eiiix sampler and i don't think it works. no matter what jumper
> settings i try it hangs at startup cycling through scsi id numbers
>
> months ago i had an acard/cf drive combo that did work with it, so if i
> can't get the pcd to work i'll have to get another acard
>
> --- In emax@yahoogroups.com, Krikor Kouchian <krikorola@...> wrote:
> >
> > It's installed but I could not test it yet, as my emax is still not
> operational due to the lack of a floppy OS (I got hold of a pc with an
> internal floppy drive to write new ones just today), It will be hopefully
> next week, I will report then.
> >
> > http://www.krikor.fr
> > +33632199413
> >
> > Booking dj & live: cedric@...
> >
> > Le 5 mars 2013 à 19:32, Scott Stanley <scartattack@...> a écrit :
> >
> > > I can test it. It works on my e6400 and esynth. I'll try it on my Emax
> I
> > > and II and get back to you.
> > >
> > > -s*
> > >
> > > On 2013-03-05, at 12:19 PM, Ted Summers <djtbs1@...> wrote:
> > >
> > >
> > >
> > > I have never had confirmation on this drive working or not.
> > >
> > > Can someone confirm it works or doesn't?
> > >
> > > Thanks,
> > > Ted
> > >
> > > [Non-text portions of this message have been removed]
> > >
> > >
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> > >
> > >
> > > ------------------------------------
> > >
> > > Emax and Emax II User's Group Website
> > >
> > > http://www.silveriafamily.comYahoo! Groups Links
> > >
> > >
> > >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Emax and Emax II User's Group Website
>
> http://www.silveriafamily.comYahoo! Groups Links
>
>
>
>


[Non-text portions of this message have been removed]