Emax

It just sticks out 1/4 of an inch, a lot better than the 50b

http://www.krikor.fr
+33632199413

Booking dj & live: cedric@...

Le 19 mars 2013 à 04:52, Ted Summers <djtbs1@...> a écrit :

> on the PCD-60b does the card adapter sit farther back, or does it stick out just as much as the 50b?
> 
> Thx,
> Ted
> 
> On Mar 18, 2013, at 5:03 PM, Scott Stanley wrote:
> 
> This kind of makes sense as I always keep a Plus OS floppy in the Emax
> floppy drive. Once booted, I can load whatever I want from the SD/CF card.
> 
> Btw, I managed to find some relatively inexpensive multi format PCMCIA card
> adapters. Unfortunately the dazzle and the mcr-5a are a bit difficult to
> come by and of you can find them they are fairly costly now. The good news
> is, it seems as though any type II adapter should work. I am not in front
> of the ones I bought now but, when I get a chance I will take a photo of
> the PCMCIA adapters that do work.
> 
> -Scott
> 
> On 2013-03-18, at 7:47 PM, krikor kouchian <krikorola@...> wrote:
> 
> I finaly could finish the upgrade of my emax to a SE/HD.
> The PCD60b was recognized by the machine, but only with the PLUS OS.
> It is a bit weird because my jumper were set to ID0 on the card reader.
> i formated a few compact flash and copied the os to those, also copied the
> SE presets, it boots up from the CF and loads all progs perfectly.
> 
> i found the reason why i could not upgrade to SE, the slim floppy i got
> seem to have a not so sensible write protect detection system, i had to put
> 2 layer of tape to get it to see it as a writable floppy.
> 
> i will check for the jumper on the reader but i'm almost certain it is set
> to be on ID0.
> 
> best
> K
> 
> http://www.krikor.fr
> +33632199413
> 
> For Live&Dj bookings contact: cedric@...
> 
> [Non-text portions of this message have been removed]
> 
> [Non-text portions of this message have been removed]
> 
> ------------------------------------
> 
> Emax and Emax II User's Group Website
> 
> http://www.silveriafamily.comYahoo! Groups Links
> 
> 


[Non-text portions of this message have been removed]