Emax

Ever hear / seen a wire / cable hooked to nothing that ends up acting as an
antenna and injecting signal into a circuit from a radio station to that
circuit?
I have.....on mixing boards no less. Wire was less then 6 ft long and there
is not a radio station within less than 8 miles proximity to that location.

Electronics can (and sometimes do) things that can be explained, but
require a lot of investigation into the cause.

-T




On Wed, Mar 27, 2013 at 9:11 AM, krikor kouchian <krikorola@...>wrote:

> **
>
>
> even if the emuser USB is unplugged from the computer and off?
>
>
> Le mercredi 27 mars 2013, Ted Summers <djtbs1@...> a �crit :
> >
> >
> > It wouldn't be recommended to have both cables plugged at the same time.
> > you could get some feedback / signal that shouldn't be there, difference
> in
> > reference ground that could cause weird errors, etc.
> >
> > -T
> >
> > On Wed, Mar 27, 2013 at 9:03 AM, krikor kouchian <krikorola@...
> >wrote:
> >
> >> Hi
> >> you mean that if a midi cable and a serial cable are connected to the
> >> machine at the same time it won't work, even i'm not using only one?
> >> that could be the reason then.
> >> but weirdly it worked on OS3.2 via midi in DSP-quattro, with both cable
> >> connected, but not via RS.
> >> i'm not at the studio right not but i'll try again with only one cable
> when
> >> i'm back.
> >> Midi control of the machine (note on/off, pitchbend...) works normaly
> with
> >> any OS
> >> best
> >> K
> >>
> >>
> >> Le mercredi 27 mars 2013, Ted Summers <djtbs1@...> a �crit :
> >> >
> >> >
> >> > It could be the IC, or the other components in the midi / serial
> circuit
> >> as
> >> > this is shared.
> >> > You don't have MIDI and serial both hooked up at same time, correct?
> >> (that
> >> > doesn't work).
> >> >
> >> > Have you tried regular MIDI transfer / data commands (no EmuSer) and
> >> > verified it works?
> >> > If MIDI doesn't work, then that would give greater possibility that
> the
> >> > circuit has a problem.
> >> >
> >> > Just my .02
> >> > -T
> >> >
> >> > On Wed, Mar 27, 2013 at 5:58 AM, krikor kouchian <krikorola@...
> >> >wrote:
> >> >
> >> >> Can it be that the IC8 6850 being defective?
> >> >> i don't get the error messages.
> >> >>
> >> >> Le jeudi 21 mars 2013, krikorola <krikorola@...> a �crit :
> >> >> >
> >> >> >
> >> >> > hello
> >> >> > the only info i could find is on the emax group here:
> >> >> > http://launch.groups.yahoo.com/group/emax/message/200
> >> >> > I really don't understand what's the problem.
> >> >> > Any EMUSER user had the same experience?
> >> >> > best
> >> >> > K
> >> >> >
> >> >> > --- In emax@yahoogroups.com, krikor kouchian <krikorola@...>
> wrote:
> >> >> >>
> >> >> >> i tried with different OS, with the original OS 3.2, midi dump
> works
> >> >> >> perfectly, but not with EMuser EMXP.
> >> >> >> With all other os it doesn't work either with midi dump in
> >> DSP-quattro
> >> >> or
> >> >> >> Emuser/EMXP
> >> >> >> i get the message on the attached picture in EMXP.
> >> >> >>
> >> >> >> http://www.krikor.fr
> >> >> >> +33632199413
> >> >> >>
> >> >> >> For Live&Dj bookings contact: cedric@...
> >> >> >>
> >> >> >>
> >> >> >>
> >> >> >>
> >> >> >> 2013/3/19 krikor kouchian <krikorola@...>
> >> >> >>
> >> >> >> > And i get the same message using the EMUSER, and the emax
> freezes,
> >> i
> >> >> need
> >> >> >> > to reboot it.
> >> >> >> >
> >> >> >> > http://www.krikor.fr
> >> >> >>
> >
> >
>
> --
> http://www.krikor.fr
> +33632199413
>
> For Live&Dj bookings contact: cedric@referenceprods.fr
>
> [Non-text portions of this message have been removed]
>
>  
>


[Non-text portions of this message have been removed]