Emax

Try to bootYOur Emax with the ones saying "Different Software Rev".
  as emax is booted with a disk it reads and loads the software rev., 
now when trying to do something it reads the disk again, but now you 
have inserted another software rev. and it does not recognise something.
a way around is either to put the never software into the old disk. Or 
simply switch the OS disks when working, so you work on a 'soundset' and 
a disk belonging to one software rev. but the disk you have inserted 
belongs to a different 'the Booted' software rev. . Just remember if 
doing things like that, to Write protect the disk........ or you will 
forget and overwrite the wrong disk.
   Easier would be to copy the Software to the old disks. .


On 01-04-2013 05:35, Julio Herrera wrote:
>
> Hi folks,
>
> New to the group and to the Emax samplers. Never have worked with any 
> kind of samplers (mostly keyboards) and decided to grab a bargain on 
> eBay (for an Emax I) and drove to L.A. (From Tijuana) to get another 
> one that says it's an SE.
>
> Here is my problem. I have about a hundred disks (original Emax with 
> it's ZD #) and only the ones that are the oldest (based on the year on 
> it) are workable as the other ones when trying to do the Preset 
> Management it gives me the "Different Software Rev" error... How can I 
> use all of these disks?
>
> Really appreciate all the support that all of you knowledgeable Emax 
> users can provide.
>
> Thanks
>
> Sent from my iPad
>
> 



[Non-text portions of this message have been removed]