Synth-DIY Yahoo! Groups Archives

Thread

Warning Sound Memory Size Error

2015-01-25 by Kirk@...

I'm getting the "Warning Sound Memory Size Error" from my Emax II.

It's a 8 Meg with HD, it was working fine until recently. I went to the Master 9,9 menu and did the 1 RAM test and it always passes, and the 2 GRAM test passes. I did both test multiply time and they pass every time.

When I do the Master 2 Memory Remaining test, I get 0524244. So not it thinks it has 1 Meg!

Is this the dreaded "scrambled megs" issue? Is there anyway to recovery my 8 megs status? Do I need to buy a code from EPR for this?

Thanks, Kirk

Re: [emax] Warning Sound Memory Size Error

2015-01-25 by Francis Cote

Had the same happen to me when I got the ram upgrade.
After removing the Ram board, cleaning the connector witb Deoxit and reinstalling, it worked fine after.
Sometimes dust gets in somehow.

Show quoted textHide quoted text

On Jan 25, 2015 1:41 PM, "Kirk@... [emax]" <emax@yahoogroups.com> wrote:

I'm getting the "Warning Sound Memory Size Error" from my Emax II.

It's a 8 Meg with HD, it was working fine until recently. I went to the Master 9,9 menu and did the 1 RAM test and it always passes, and the 2 GRAM test passes. I did both test multiply time and they pass every time.

When I do the Master 2 Memory Remaining test, I get 0524244. So not it thinks it has 1 Meg!

Is this the dreaded "scrambled megs" issue? Is there anyway to recovery my 8 megs status? Do I need to buy a code from EPR for this?

Thanks, Kirk

Re: [emax] Warning Sound Memory Size Error

2015-01-25 by Ted Summers

A scrambled megs procedure is in the files section….(I don't know if it works)

You can try that too- worst that happens is it doesn't work. best is that it does and you are out no money…

-T

On Jan 25, 2015, at 10:54 AM, "Francis Cote francis.cote@spadz.com [emax]" <emax@yahoogroups.com> wrote:

Had the same happen to me when I got the ram upgrade.
After removing the Ram board, cleaning the connector witb Deoxit and reinstalling, it worked fine after.
Sometimes dust gets in somehow.

On Jan 25, 2015 1:41 PM, "Kirk@... [emax]" <emax@yahoogroups.com> wrote:

I'm getting the "Warning Sound Memory Size Error" from my Emax II.

It's a 8 Meg with HD, it was working fine until recently. I went to the Master 9,9 menu and did the 1 RAM test and it always passes, and the 2 GRAM test passes. I did both test multiply time and they pass every time.

When I do the Master 2 Memory Remaining test, I get 0524244. So not it thinks it has 1 Meg!

Is this the dreaded "scrambled megs" issue? Is there anyway to recovery my 8 megs status? Do I need to buy a code from EPR for this?

Thanks, Kirk