Emax

I wonder if you can use a "modern" floppy drive without any jumper settings. Anybody 
experiment with this or do I have to get the TEAC A529?

Thanks for your input, 

Cord

Hi
 
The floppy id has to be set to the right id to function. As I recall the id on the Emax must be 0 and most new floppy drives is set to 1 as default and cannot be changed because there are no jumpers.
 
This place might have the drive: http://www.route66studios.com/
 
A good source for information about your Emax is: www.emulatorarchive.com  .
 
I urge everyone who own an Emax or an old Emulator to use emulatorarchive and to buy from the site in order to keep it alive :-)
 
Best regards
 
Brian
Denmark 
 
Best regards
 
Brian

cord_mueller <cord.mueller@...> wrote:

I wonder if you can use a "modern" floppy drive without any jumper settings. Anybody 
experiment with this or do I have to get the TEAC A529?

Thanks for your input, 

Cord






Emax and Emax II User's Group Website

http://www.silveriafamily.com 


Yahoo! Groups SponsorADVERTISEMENT


---------------------------------
Yahoo! Groups Links

   To visit your group on the web, go to:
http://groups.yahoo.com/group/emax/
  
   To unsubscribe from this group, send an email to:
emax-unsubscribe@yahoogroups.com
  
   Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 



[Non-text portions of this message have been removed]