Yahoo Groups archive

Emax

Index last updated: 2026-04-28 23:23 UTC

Thread

Re: [emax] Digest Number 242

Re: [emax] Digest Number 242

2002-08-26 by vornfklorb@...

I haven't yet been able to load any EmaxII samples onto the EIIIXS (due to my 
SCSI connector handicap I mentioned).  Actually... I plan to grab a SCSI 
adaptor from work this week and use it to load my samples via the Zip drive I 
mentioned.  I will post my impressions of the EmaxII samples played back on 
EIIIXS to the list.  I know the EIIIXS manual says that EmaxII samples will 
take about twice as long to load on the EIIIXS.
Pedro, I'm curious what you are hearing from the ESI when it plays your 
EmaxII sounds.  What is the difference?
Also, is anyone else using EmaxII samples on another EMU system with good/bad 
results?

thanks,
PF


In a message dated 8/25/2002 9:22:36 PM Pacific Daylight Time, 
emax@yahoogroups.com writes:

    Date: Sun, 25 Aug 2002 23:09:31 +0200
Show quoted textHide quoted text
    From: "Pedro H" <sotavento1999@hotmail.com>
 Subject: Re: My 2 EmaxII Friendly Zip100 Drives
 
 Hello, how does the  Emu III sound? It´s similar to the Emax II´s?
 I have an ESI 32, which can read Emax II SCSI drives, but the sound is a 
joke...
 Regards.
 Pedro.
   ----- Original Messa >>

Re: [emax] Digest Number 242

2002-08-26 by Pedro H

The sounds are quite similar , apart of the special "warm" feeling when you play a sound on an Emax II, and of course if you don´t use any filter. If you use the Emax II filters, forget the ESI 32 to import the presets.
I use to sample everything in the Emax II and if don´t use the filter then import the presets in the ESI 32, with a common MO Fujitsu 230 Mb drive. I do that for piano sounds, long pads, etc, because my ESI32 is upgraded with 32 Mb, and I think the velocity is better than the Emax´s.
Regards.
Pedro.
P.D. Could anyone send me an O.S. disk for the Emulator III XP, I would send you Emax II Cds, or Emulator II or III disks library.
Thanks.
Show quoted textHide quoted text
  ----- Original Message ----- 
  From: vornfklorb@... 
  To: emax@yahoogroups.com 
  Sent: Monday, August 26, 2002 7:47 AM
  Subject: Re: [emax] Digest Number 242


  I haven't yet been able to load any EmaxII samples onto the EIIIXS (due to my 
  SCSI connector handicap I mentioned).  Actually... I plan to grab a SCSI 
  adaptor from work this week and use it to load my samples via the Zip drive I 
  mentioned.  I will post my impressions of the EmaxII samples played back on 
  EIIIXS to the list.  I know the EIIIXS manual says that EmaxII samples will 
  take about twice as long to load on the EIIIXS.
  Pedro, I'm curious what you are hearing from the ESI when it plays your 
  EmaxII sounds.  What is the difference?
  Also, is anyone else using EmaxII samples on another EMU system with good/bad 
  results?

  thanks,
  PF


  In a message dated 8/25/2002 9:22:36 PM Pacific Daylight Time, 
  emax@yahoogroups.com writes:

      Date: Sun, 25 Aug 2002 23:09:31 +0200
      From: "Pedro H" <sotavento1999@...>
  Subject: Re: My 2 EmaxII Friendly Zip100 Drives

  Hello, how does the  Emu III sound? It´s similar to the Emax II´s?
  I have an ESI 32, which can read Emax II SCSI drives, but the sound is a 
  joke...
  Regards.
  Pedro.
     ----- Original Messa >>

  Emax and Emax II User's Group Website

  http://www.silveriafamily.com 

  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 



[Non-text portions of this message have been removed]

Re: [emax] Digest Number 242

2002-08-27 by Skip Spoula

Whats your mailing address. I'll send you an OS disk for the EIIIXP.
Skip
Show quoted textHide quoted text
  ----- Original Message ----- 
  From: Pedro H 
  To: emax@yahoogroups.com 
  Sent: Monday, August 26, 2002 3:56 PM
  Subject: Re: [emax] Digest Number 242


  The sounds are quite similar , apart of the special "warm" feeling when you play a sound on an Emax II, and of course if you don´t use any filter. If you use the Emax II filters, forget the ESI 32 to import the presets.
  I use to sample everything in the Emax II and if don´t use the filter then import the presets in the ESI 32, with a common MO Fujitsu 230 Mb drive. I do that for piano sounds, long pads, etc, because my ESI32 is upgraded with 32 Mb, and I think the velocity is better than the Emax´s.
  Regards.
  Pedro.
  P.D. Could anyone send me an O.S. disk for the Emulator III XP, I would send you Emax II Cds, or Emulator II or III disks library.
  Thanks.
    ----- Original Message ----- 
    From: vornfklorb@... 
    To: emax@yahoogroups.com 
    Sent: Monday, August 26, 2002 7:47 AM
    Subject: Re: [emax] Digest Number 242


    I haven't yet been able to load any EmaxII samples onto the EIIIXS (due to my 
    SCSI connector handicap I mentioned).  Actually... I plan to grab a SCSI 
    adaptor from work this week and use it to load my samples via the Zip drive I 
    mentioned.  I will post my impressions of the EmaxII samples played back on 
    EIIIXS to the list.  I know the EIIIXS manual says that EmaxII samples will 
    take about twice as long to load on the EIIIXS.
    Pedro, I'm curious what you are hearing from the ESI when it plays your 
    EmaxII sounds.  What is the difference?
    Also, is anyone else using EmaxII samples on another EMU system with good/bad 
    results?

    thanks,
    PF


    In a message dated 8/25/2002 9:22:36 PM Pacific Daylight Time, 
    emax@yahoogroups.com writes:

        Date: Sun, 25 Aug 2002 23:09:31 +0200
        From: "Pedro H" <sotavento1999@...>
    Subject: Re: My 2 EmaxII Friendly Zip100 Drives

    Hello, how does the  Emu III sound? It´s similar to the Emax II´s?
    I have an ESI 32, which can read Emax II SCSI drives, but the sound is a 
    joke...
    Regards.
    Pedro.
       ----- Original Messa >>

    Emax and Emax II User's Group Website

    http://www.silveriafamily.com 

    Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 



  [Non-text portions of this message have been removed]


  Emax and Emax II User's Group Website

  http://www.silveriafamily.com 

  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 



[Non-text portions of this message have been removed]

Re: [emax] Digest Number 242

2002-08-27 by Pedro H

Thanks Skip, tell me your email, and I´ll send you my address.
Pedro.
Show quoted textHide quoted text
  ----- Original Message ----- 
  From: Skip Spoula 
  To: emax@...m 
  Sent: Tuesday, August 27, 2002 2:58 AM
  Subject: Re: [emax] Digest Number 242


  Whats your mailing address. I'll send you an OS disk for the EIIIXP.
  Skip
    ----- Original Message ----- 
    From: Pedro H 
    To: emax@yahoogroups.com 
    Sent: Monday, August 26, 2002 3:56 PM
    Subject: Re: [emax] Digest Number 242


    The sounds are quite similar , apart of the special "warm" feeling when you play a sound on an Emax II, and of course if you don´t use any filter. If you use the Emax II filters, forget the ESI 32 to import the presets.
    I use to sample everything in the Emax II and if don´t use the filter then import the presets in the ESI 32, with a common MO Fujitsu 230 Mb drive. I do that for piano sounds, long pads, etc, because my ESI32 is upgraded with 32 Mb, and I think the velocity is better than the Emax´s.
    Regards.
    Pedro.
    P.D. Could anyone send me an O.S. disk for the Emulator III XP, I would send you Emax II Cds, or Emulator II or III disks library.
    Thanks.
      ----- Original Message ----- 
      From: vornfklorb@... 
      To: emax@yahoogroups.com 
      Sent: Monday, August 26, 2002 7:47 AM
      Subject: Re: [emax] Digest Number 242


      I haven't yet been able to load any EmaxII samples onto the EIIIXS (due to my 
      SCSI connector handicap I mentioned).  Actually... I plan to grab a SCSI 
      adaptor from work this week and use it to load my samples via the Zip drive I 
      mentioned.  I will post my impressions of the EmaxII samples played back on 
      EIIIXS to the list.  I know the EIIIXS manual says that EmaxII samples will 
      take about twice as long to load on the EIIIXS.
      Pedro, I'm curious what you are hearing from the ESI when it plays your 
      EmaxII sounds.  What is the difference?
      Also, is anyone else using EmaxII samples on another EMU system with good/bad 
      results?

      thanks,
      PF


      In a message dated 8/25/2002 9:22:36 PM Pacific Daylight Time, 
      emax@yahoogroups.com writes:

          Date: Sun, 25 Aug 2002 23:09:31 +0200
          From: "Pedro H" <sotavento1999@...>
      Subject: Re: My 2 EmaxII Friendly Zip100 Drives

      Hello, how does the  Emu III sound? It´s similar to the Emax II´s?
      I have an ESI 32, which can read Emax II SCSI drives, but the sound is a 
      joke...
      Regards.
      Pedro.
         ----- Original Messa >>

      Emax and Emax II User's Group Website

      http://www.silveriafamily.com 

      Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 



    [Non-text portions of this message have been removed]


    Emax and Emax II User's Group Website

    http://www.silveriafamily.com 

    Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 



  [Non-text portions of this message have been removed]


  Emax and Emax II User's Group Website

  http://www.silveriafamily.com 

  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 



[Non-text portions of this message have been removed]

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.