Yahoo Groups archive
Thread
2011-05-20 by Vavasseur Philippe
hello I seek Memory Install Disks 2.14 E-mu PN ZD413 I also seek the floppy disk stereo Installation/Operation Software Disk E-mu PN ZD868 someone has the copy of this disk? I want to move a rack version has a different keyboard version Best Regards, philippe
2011-05-20 by Ted Summers
Philippe- As I explained to you directly (and someone can correct me if I am wrong)...the update disks are not available and have not been available for quite some time. These are ONE USE disks. Once used they cannot be used again. Nor can you easily find the Stereo chip easily either. (I know this as I looked last year and was told that to get these I would have to buy qty 10 at cost of $300 US). Cheaper and easier to just get an Emax 2 with all the options. You wrote to me of moving the boards from rack to keyboard. As I said before- move all the boards except the display and it should work for you. You aren't going to be able to make the non-stereo unit stereo. That update is not available. My effort to recreate the update was not successful and costs to go further were prohibitive. Regards, Ted On Thu, May 19, 2011 at 11:34 PM, Vavasseur Philippe <philippe.69@...>wrote: > > > hello I seek > > Memory Install Disks 2.14 E-mu PN ZD413 > > I also seek the floppy disk stereo Installation/Operation Software Disk > E-mu PN ZD868 > > someone has the copy of this disk? > > I want to move a rack version has a different keyboard version > > Best Regards, > philippe > > > [Non-text portions of this message have been removed]
2011-05-20 by philippe.69
the update is based in the EPROM for the ram? -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de Ted Summers Envoyé : vendredi 20 mai 2011 19:43 À : emax@yahoogroups.com Objet : Re: [emax] hello I seek E-mu PN ZD413 , E-mu PN ZD868 Philippe- As I explained to you directly (and someone can correct me if I am wrong)...the update disks are not available and have not been available for quite some time. These are ONE USE disks. Once used they cannot be used again. Nor can you easily find the Stereo chip easily either. (I know this as I looked last year and was told that to get these I would have to buy qty 10 at cost of $300 US). Cheaper and easier to just get an Emax 2 with all the options. You wrote to me of moving the boards from rack to keyboard. As I said before- move all the boards except the display and it should work for you. You aren't going to be able to make the non-stereo unit stereo. That update is not available. My effort to recreate the update was not successful and costs to go further were prohibitive. Regards, Ted On Thu, May 19, 2011 at 11:34 PM, Vavasseur Philippe <philippe.69@...>wrote: > > > hello I seek > > Memory Install Disks 2.14 E-mu PN ZD413 > > I also seek the floppy disk stereo Installation/Operation Software Disk > E-mu PN ZD868 > > someone has the copy of this disk? > > I want to move a rack version has a different keyboard version > > Best Regards, > philippe > > > [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links ----- Aucun virus trouvé dans ce message. Analyse effectuée par AVG - www.avg.fr Version: 10.0.1375 / Base de données virale: 1509/3649 - Date: 20/05/2011
2011-05-24 by philippe.69
Your message has been sent to the group. It will be emailed to members who have chosen to receive group messages -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de Ted Summers Envoyé : vendredi 20 mai 2011 19:43 À : emax@yahoogroups.com Objet : Re: [emax] hello I seek E-mu PN ZD413 , E-mu PN ZD868 Philippe- As I explained to you directly (and someone can correct me if I am wrong)...the update disks are not available and have not been available for quite some time. These are ONE USE disks. Once used they cannot be used again. Nor can you easily find the Stereo chip easily either. (I know this as I looked last year and was told that to get these I would have to buy qty 10 at cost of $300 US). Cheaper and easier to just get an Emax 2 with all the options. You wrote to me of moving the boards from rack to keyboard. As I said before- move all the boards except the display and it should work for you. You aren't going to be able to make the non-stereo unit stereo. That update is not available. My effort to recreate the update was not successful and costs to go further were prohibitive. Regards, Ted On Thu, May 19, 2011 at 11:34 PM, Vavasseur Philippe <philippe.69@...>wrote: > > > hello I seek > > Memory Install Disks 2.14 E-mu PN ZD413 > > I also seek the floppy disk stereo Installation/Operation Software Disk > E-mu PN ZD868 > > someone has the copy of this disk? > > I want to move a rack version has a different keyboard version > > Best Regards, > philippe > > > [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links ----- Aucun virus trouvé dans ce message. Analyse effectuée par AVG - www.avg.fr Version: 10.0.1375 / Base de données virale: 1509/3649 - Date: 20/05/2011
2011-05-24 by philippe.69
I have 2 Emax II 1 rack Emax II with 4 MB of Ram not stereo 1 version Emax II keyboard with him and 2mb Ram Stereo I want to swap the RAM between the two versions And resell the rack with 2mb of Ram not stereo And keep the keyboard and it will have stereo and 4 mb I found the memory chip in France and the price exorbitent I request a quote for 16 other chip 16x € 35.00 lolllllllllll you better buy another turbo version Emax II 8mb if I switch the keyboard into a 4 MB I'll be fine -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de Ted Summers Envoyé : mercredi 25 mai 2011 01:20 À : emax@yahoogroups.com Objet : Re: [emax] Re: hello I seek E-mu PN ZD413 , E-mu PN ZD868 Phillipe- OK- so EPR can help you enable the Memory that your unit already has and the stereo setting that you have previously installed. That is a useful service, especially for those not wanting to socket the EEPROM that holds the settings. However, if you don't have the necessary memory PALs for the unit that enable larger memory and the necessary Stereo PAL, you still will not be able to enable the function(s). If you are now able to re-create these PALs so we can all have these functions, please let us know. Regards, Ted On Tue, May 24, 2011 at 1:13 PM, Vavasseur Philippe <philippe.69@...>wrote: > > > about my application floppy disk ZD413, ZD868 stereo Installation,Memory > Install > > Who cares for this > > Memory Install Disks 2.14 E-mu PN ZD413 > > floppy disk stereo Installation/Operation Software > Disk E-mu PN ZD868 > > here's my request reply > > Phillipe, > I have recently resurrected the Scrambled Megs software program which > requires two older MACs to get it to actually run. I have created a "part" > on the website which is essentially my minimum bench fee, since it will > require me to contact whomever is re-configuring and walk them through the > update process. > Here's the link: > > > http://www.eprelectronics.com/store/E-mu-Keyboards-PARTS/E-mu-Emax/Emax-II-Adjust-Features-Code-p201.html > > Hope this helps, > Richard Bruyn > EPRElectronics.com > > Philippe, > It requires 2 MACs on my end. All you need is the Emax II to be up and > running and in Diagnostic mode with selection "Adjust Features". > Richard > > --- In emax@yahoogroups.com, Ted Summers <djtbs1@...> wrote: > > > > Philippe- > > > > As I explained to you directly (and someone can correct me if I am > > wrong)...the update disks are not available and have not been available > for > > quite some time. > > These are ONE USE disks. > > Once used they cannot be used again. > > > > Nor can you easily find the Stereo chip easily either. > > (I know this as I looked last year and was told that to get these I would > > have to buy qty 10 at cost of $300 US). > > Cheaper and easier to just get an Emax 2 with all the options. > > > > You wrote to me of moving the boards from rack to keyboard. > > > > As I said before- move all the boards except the display and it should > work > > for you. > > > > You aren't going to be able to make the non-stereo unit stereo. > > That update is not available. > > My effort to recreate the update was not successful and costs to go > further > > were prohibitive. > > > > Regards, > > Ted > > > > > > > > On Thu, May 19, 2011 at 11:34 PM, Vavasseur Philippe <philippe.69@ > ...>wrote: > > > > > > > > > > > > hello I seek > > > > > > Memory Install Disks 2.14 E-mu PN ZD413 > > > > > > I also seek the floppy disk stereo Installation/Operation Software Disk > > > E-mu PN ZD868 > > > > > > someone has the copy of this disk? > > > > > > I want to move a rack version has a different keyboard version > > > > > > Best Regards, > > > philippe > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links ----- Aucun virus trouvé dans ce message. Analyse effectuée par AVG - www.avg.fr Version: 10.0.1375 / Base de données virale: 1509/3657 - Date: 24/05/2011
2011-05-24 by Vavasseur Philippe
about my application floppy disk ZD413, ZD868 stereo Installation,Memory Install Who cares for this Memory Install Disks 2.14 E-mu PN ZD413 floppy disk stereo Installation/Operation Software Disk E-mu PN ZD868 here's my request reply Phillipe, I have recently resurrected the Scrambled Megs software program which requires two older MACs to get it to actually run. I have created a "part" on the website which is essentially my minimum bench fee, since it will require me to contact whomever is re-configuring and walk them through the update process. Here's the link: http://www.eprelectronics.com/store/E-mu-Keyboards-PARTS/E-mu-Emax/Emax-II-Adjust-Features-Code-p201.html Hope this helps, Richard Bruyn EPRElectronics.com Philippe, It requires 2 MACs on my end. All you need is the Emax II to be up and running and in Diagnostic mode with selection "Adjust Features". Richard --- In emax@yahoogroups.com, Ted Summers <djtbs1@...> wrote:
> > Philippe- > > As I explained to you directly (and someone can correct me if I am > wrong)...the update disks are not available and have not been available for > quite some time. > These are ONE USE disks. > Once used they cannot be used again. > > Nor can you easily find the Stereo chip easily either. > (I know this as I looked last year and was told that to get these I would > have to buy qty 10 at cost of $300 US). > Cheaper and easier to just get an Emax 2 with all the options. > > You wrote to me of moving the boards from rack to keyboard. > > As I said before- move all the boards except the display and it should work > for you. > > You aren't going to be able to make the non-stereo unit stereo. > That update is not available. > My effort to recreate the update was not successful and costs to go further > were prohibitive. > > Regards, > Ted > > > > On Thu, May 19, 2011 at 11:34 PM, Vavasseur Philippe <philippe.69@...>wrote: > > > > > > > hello I seek > > > > Memory Install Disks 2.14 E-mu PN ZD413 > > > > I also seek the floppy disk stereo Installation/Operation Software Disk > > E-mu PN ZD868 > > > > someone has the copy of this disk? > > > > I want to move a rack version has a different keyboard version > > > > Best Regards, > > philippe > > > > > > > > > [Non-text portions of this message have been removed] >
2011-05-24 by Ted Summers
Phillipe- OK- so EPR can help you enable the Memory that your unit already has and the stereo setting that you have previously installed. That is a useful service, especially for those not wanting to socket the EEPROM that holds the settings. However, if you don't have the necessary memory PALs for the unit that enable larger memory and the necessary Stereo PAL, you still will not be able to enable the function(s). If you are now able to re-create these PALs so we can all have these functions, please let us know. Regards, Ted On Tue, May 24, 2011 at 1:13 PM, Vavasseur Philippe <philippe.69@...>wrote: > > > about my application floppy disk ZD413, ZD868 stereo Installation,Memory > Install > > Who cares for this > > Memory Install Disks 2.14 E-mu PN ZD413 > > floppy disk stereo Installation/Operation Software > Disk E-mu PN ZD868 > > here's my request reply > > Phillipe, > I have recently resurrected the Scrambled Megs software program which > requires two older MACs to get it to actually run. I have created a "part" > on the website which is essentially my minimum bench fee, since it will > require me to contact whomever is re-configuring and walk them through the > update process. > Here's the link: > > > http://www.eprelectronics.com/store/E-mu-Keyboards-PARTS/E-mu-Emax/Emax-II-Adjust-Features-Code-p201.html > > Hope this helps, > Richard Bruyn > EPRElectronics.com > > Philippe, > It requires 2 MACs on my end. All you need is the Emax II to be up and > running and in Diagnostic mode with selection "Adjust Features". > Richard > > --- In emax@yahoogroups.com, Ted Summers <djtbs1@...> wrote: > > > > Philippe- > > > > As I explained to you directly (and someone can correct me if I am > > wrong)...the update disks are not available and have not been available > for > > quite some time. > > These are ONE USE disks. > > Once used they cannot be used again. > > > > Nor can you easily find the Stereo chip easily either. > > (I know this as I looked last year and was told that to get these I would > > have to buy qty 10 at cost of $300 US). > > Cheaper and easier to just get an Emax 2 with all the options. > > > > You wrote to me of moving the boards from rack to keyboard. > > > > As I said before- move all the boards except the display and it should > work > > for you. > > > > You aren't going to be able to make the non-stereo unit stereo. > > That update is not available. > > My effort to recreate the update was not successful and costs to go > further > > were prohibitive. > > > > Regards, > > Ted > > > > > > > > On Thu, May 19, 2011 at 11:34 PM, Vavasseur Philippe <philippe.69@ > ...>wrote: > > > > > > > > > > > > hello I seek > > > > > > Memory Install Disks 2.14 E-mu PN ZD413 > > > > > > I also seek the floppy disk stereo Installation/Operation Software Disk > > > E-mu PN ZD868 > > > > > > someone has the copy of this disk? > > > > > > I want to move a rack version has a different keyboard version > > > > > > Best Regards, > > > philippe > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > [Non-text portions of this message have been removed]