First of: Thanks to Thor Mamen for doing the initial conversion. Unfortunately I found the sets to have some weird settings, so I fixed them, here's what I did: - Replaced the groups with proper named and proper working ones (hat groups set to 1 voice max.). - Added the missing zones for the kicks in some sets (the samples have allready been in the zips). - Added some zone for a kick on B0 in case there was none (in the GM standard you will most likely find a deeper kick there). - Exchanged some snares (lower tone = D1, higher tone = E1, again following the GM conventions). - Set all zones to "one shot". - Adjusted the amp ADSR to be suitable for drums. http://www.saschafranck.de/exs/MPC2000XL.zip Regards, Sascha
Message
Updated MPC2000XL sets
2002-04-15 by Sascha Franck
Attachments
- No local attachments were found for this message.