EXS 24 Logic Sampler Users Group

OK -- re my last post quoted below -- the reason some controllers weren't
working was that I forgot that I had a compressor sitting in the first
insert slot and that was grabbing some of the controllers. 
So just put in a fader and map controller 1 (input from mod wheel) to:
controller 89 to get filter cutoff 
controller 90 to vary filter resonance 
etc as on Page 57 of your EXS manual.



>LA 4.7 allows you to use the environment's tools to work with audio
>instruments. Arpeggiators, for example,  work fine for me -- just cable the
>output of the arpeggiator to the audioinstrument you want and select the
>arpeggiator in the arrange page.
>
>You should be able to use a  fader to map any controller to any other
>controller. Look for basic environment tutorials -- try Len Sasso's site --
>he has the definitive guides to using the environment (right up to date
>with LA 4.7 available for download and some basic tutorials are available
>on the Web and on his site (I think). You can download some environments
>from his site for things like the Line 6 POD and see examples of how these
>things work.
>
>I just tried using a fader to map my mod wheel to various EXS controllers
>-- no luck so far. 
>
>I tried doing the same to the Model E and got it to work with some
>controllers but not all. For examples: I mapped a fader to take incoming
>controller 1 (modulation) to controller 65 and the glide setting on the
>Model E panel  turned with the mod wheel and the change was evident in the
>sound.  Other parameters  egs Mix Osc 1,2,3 and waveform Osc 2,3 all worked
>but the really useful ones like filter cutoff and emphasis did not work as
>expected.
>
>(go to Dave B's site and find in the softsynths user section a page which
>shows how the controllers for the Model E in Logic are mapped courtesy of
>Len Sasso: http://www.ozemail.com.au/~oscwilde/softsynth/modelecont.htm).
>
>Perhaps someone else has got a little further with this.
>
>Regards,
>Murray
>
>
>
>
>
>
>To unsubscribe from this group, send an email to:
>exs-users-unsubscribe@egroups.com
>
> 
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 
>
>