EXS 24 Logic Sampler Users Group

Igor -

Thanks for your reply. I tried your suggestion, however, as soon as I try to
draw I get a "No sequence specified. Please select any note to specify a
sequence." error. Any ideas?

Thanks!!

Eric

-----Original Message-----
From: igor [mailto:igorbolender@...]
Sent: Wednesday, April 18, 2001 11:51 AM
To: exs-users@yahoogroups.com
Subject: Re: [exs] Is a MIDI interface "REQUIRED" for EXS24??




Hey everyone -
Just got a titanium powerbook (sweet!). I have logic 4.7 running fine
on my G4 Power Mac, and just installed it on the powerbook, just for
doing EXS work. However, I don't have any midi interfaces connected
to it, and I am using the built in speaker (to hear the exs sounds).
Do I have to have a usb midi interface hooked up to it just to place
notes in the matrix editor? I've tried a couple of changes to the
environment, but always get a "No sequence - select a note" type
error.
If anyone has any advice, or can refer me to a page # in the logic
manual, I would appreciate it
Eric Doggett
doggett@...
****************
Take the "Pencil" tool and create a blank Track, open it and draw some
notes...
just assign this track as "Instrument"
Igor




To unsubscribe from this group, send an email to:
exs-users-unsubscribe@egroups.com



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Hey everyone -
Just got a titanium powerbook (sweet!). I have logic 4.7 running fine
on my G4 Power Mac, and just installed it on the powerbook, just for
doing EXS work. However, I don't have any midi interfaces connected
to it, and I am using the built in speaker (to hear the exs sounds).
Do I have to have a usb midi interface hooked up to it just to place
notes in the matrix editor? I've tried a couple of changes to the
environment, but always get a "No sequence - select a note" type
error.
If anyone has any advice, or can refer me to a page # in the logic
manual, I would appreciate it
Eric Doggett
doggett@...
****************
Take the "Pencil" tool and create a blank Track, open it and draw some
notes...
just assign this track as "Instrument"
Igor

At 11:50 AM 18/04/01 -0400, you wrote:
>Igor -
>
>Thanks for your reply. I tried your suggestion, however, as soon as I try to
>draw I get a "No sequence specified. Please select any note to specify a
>sequence." error. Any ideas?

You get this error message if you haven't selected the empty sequence you
have created in the arrange page. You have to click on the sequence so it
is highlighted before you open it in the matrix editor.

>Take the "Pencil" tool and create a blank Track, open it and draw some
>notes...
 
Do you understand what Igor meant about using  the pencil tool to click in
the arrange page to create an empty sequence? A small blank one bar
sequence will appear which you can then select and edit in any editor.

Regards,
Murray

>
>To unsubscribe from this group, send an email to:
>exs-users-unsubscribe@egroups.com
>
> 
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 
>
>

At 11:50 AM 18/04/01 -0400, you wrote:
>Igor -
>Thanks for your reply. I tried your suggestion, however, as soon as I try
to
>draw I get a "No sequence specified. Please select any note to specify a
>sequence." error. Any ideas?
You get this error message if you haven't selected the empty sequence you
have created in the arrange page. You have to click on the sequence so it
is highlighted before you open it in the matrix editor.
>Take the "Pencil" tool and create a blank Track, open it and draw some
>notes...
Do you understand what Igor meant about using  the pencil tool to click in
the arrange page to create an empty sequence? A small blank one bar
sequence will appear which you can then select and edit in any editor.
Regards,
Murray
********************
Yes, Murray is right ;o) Draw an empty Track with the Pencil in the arrange
window, select it with the Arrow tool or Doubleclik on it ( if it brings u
on a Matrix editor), open the Matrix and use again the right tool to draw
notes ;o)
now it can work i think ;o)
igor

I've been considering trying the Roland USB powered keyboard 
controllers to see if that would work for programming on the 
airplane. Has anyone tested compatibility?

I've been trying to figure out the best portable solution, and also 
one that didn't require an external power source. So using as 
many USB powered items as possible. Such as the Harmon 
Kardon Stick speakers, because the speakers built into the 
Ti-Book sucks..........also, is there still a mic line in on the Ti 
-Book? Too bad you couldn't run the Harmon Kardon sticks off of 
the new  Emagic 2/6 USB audio interface., as it only has rca jack 
outputs, and any external synth modules couldn;t be monitored 
by the sticks, but it could by some of the Roland Battery operated 
monitors.

Does anyone know if the MT4 midi interface, and the 2/6 audio 
interface and the USB dongle are all capable of being daisy 
chained.Because too many USB devices and guess you would 
have to get a hub.

--- In exs-users@y..., Murray McDowall <murraymc@m...> wrote:
> At 11:50 AM 18/04/01 -0400, you wrote:
> >Igor -
> >
> >Thanks for your reply. I tried your suggestion, however, as 
soon as I try to
> >draw I get a "No sequence specified. Please select any note 
to specify a
> >sequence." error. Any ideas?
> 
> You get this error message if you haven't selected the empty 
sequence you
> have created in the arrange page. You have to click on the 
sequence so it
> is highlighted before you open it in the matrix editor.
> 
> >Take the "Pencil" tool and create a blank Track, open it and 
draw some
> >notes...
>  
> Do you understand what Igor meant about using  the pencil 
tool to click in
> the arrange page to create an empty sequence? A small blank 
one bar
> sequence will appear which you can then select and edit in any 
editor.
> 
> Regards,
> Murray
> 
> 
> 
> >
> >To unsubscribe from this group, send an email to:
> >exs-users-unsubscribe@egroups.com
> >
> > 
> >
> >Your use of Yahoo! Groups is subject to 
http://docs.yahoo.com/info/terms/ 
> >
> >