EXS 24 Logic Sampler Users Group

Message posted by matt mckenna <skylabfilmpop@...>:

Sure this has been covered before, anyone care to chime in?  I have just
translated some Vienna instruments patches to ESX from Giga format.  The mod
wheel velocity crossfading didn't make it through translation.  I can't
really see how to get it up and running, any help?  Thanks!!

At 02:07 AM 10/3/2008, you wrote:

>Sure this has been covered before, anyone care to chime in?  I have just
>translated some Vienna instruments patches to ESX from Giga format.  The mod
>wheel velocity crossfading didn't make it through translation.  I can't
>really see how to get it up and running, any help?  Thanks!!

(This is one advantage Translator www.chickensys.com may bring to the 
included conversions)

-Set up a modulator CC1 as the source, and Sample Select as the 
destination. Set amount of 100%.
-For example a 3 way xfade, set the XFade value to anywheres from 25 to 40.
-Set the Sample Select fields in the Groups (you can do this in the 
Zones too, but there's a lot more to do) to the ranges you desire, in 
our example you'd set them to 0-42, 43-85, 86-127.

The XFade value puts a fade in and fade out IN ADDITION to the Select 
values. So a XFade value of 40 will fade in/out each intersecting 
travel the full amount, whereas 20 just smooths it out.

IMPORTANT: There are two limitations that EXS24 has regarding doing 
what Giga does.

You can't have a MW Xfade on a velocity switched instrument on the 
EXS24. This is because the Sample Selects are not available to use 
for MWXfade because they are being used for the Velocity switching.

A Giga instrument can have custom XFade settings per Zone. The EXS 
has just one XFade offset value for the instrument, but if the Giga 
values are consistent (which they often are), the EXS24 can do it.

Garth Hjelte
Sampler User

If Garth from Chicken Systems is out there, this is for you.

Sorry to post on this forum, but I have sent several e-mails to the 
company e-mail address with no reply. I know Garth posts here quite 
often.

I have a Translator Mac query that has never been answered - please contact me.

Regards - Colin Shapiro

At 10:38 AM 10/24/2008, you wrote:

>If Garth from Chicken Systems is out there, this is for you. Sorry 
>to post on this forum, but I have sent several e-mails to the
>company e-mail address with no reply. I know Garth posts here quite  often.
>I have a Translator Mac query that has never been answered - please 
>contact me.

Thanks, I'm emailing you back - I haven't gotten anything from you 
that I've seen. We have a pretty tough email filtering system.

Garth Hjelte
Sampler User

Thanks Garth for your fast reply and sorry again for "abusing" the list.....
- - - - - - - - - - - - - - -

>At 10:38 AM 10/24/2008, you wrote:
>
>>If Garth from Chicken Systems is out there, this is for you. Sorry
>>to post on this forum, but I have sent several e-mails to the
>>company e-mail address with no reply. I know Garth posts here quite  often.
>>I have a Translator Mac query that has never been answered - please
>>contact me.
>
>Thanks, I'm emailing you back - I haven't gotten anything from you
>that I've seen. We have a pretty tough email filtering system.
>
>Garth Hjelte
>Sampler User