EXS 24 Logic Sampler Users Group

Hello.  
I am a new member, so forgive me if this topic has already been 
covered.  (I searched the archives, so I don't think it has been.)

Whenever a sample is sounded and the filter is on (cutoff is low as 
well as the drive and decay on the filter) there are audible clicks 
at the beginning and end of the sound.  
This is what i know the problem isn't:  my samples.  There are about 
five of them, and they all begin and end at the zero crossing.
The problem could be my audio card, but most other soft-synths 
perform click-free.

On say, my Juno, the clicks could be eliminated by raising the attack 
on the filter (or amp) a bit.  This is not so with the EXS.  I can 
raise the attack settings as high as Cypress Hill, but they are still 
there.

Note:  the clicks go silent when the filter is off.


Here's my system for reference:

athlon 700 (oc'd to 770)
256M pc133 
75 Gig Ibm 75gxp
video card
Digidesign Audiomedia III (it's an older card that doesn't even have 
ASIO support, nevermind that new EASI stuff.)

Any ideas?  
Thanks.

-[d]