EXS 24 Logic Sampler Users Group

Hi,
You should change the master fader's device from DIO to ASIO. Just select it
and look in the parameter list on the left side of the screen. For some
reason Logic sometimes doesn't change that when you switch hardware.
Mardyk

>  
> 
> [LAP-Mac]Direct I/o not available....
> 
> Hi,
> I've got one that has stumped me for two weeks..... Please help....
> Im using LAP 4.7.3 on a G4 400 agp with 760ram writing to internal 7200 rpm
> ata drives. I use an M-Audio delta 44 the EXS/Absynth/ and some plugins...
> I was originally using an audiomedia 3 card and direct I/O....
> I removed the AM3 card and installed the Delta... I removed all digidesign
> extensions and control panels. And installed the Delta extensions/CP's......
> I than set up LAP for the new hardware..... I unchecked dir I/o and checked
> asio2.....
> All seemed fine so I began working on a sound for video piece.....
> 
> After calling up 20 exs's and 2 absynth modules I started to get "disk too
> slow errors", I decided to bounce some tracks to audio, but when I hit the
> bounce button I get an error that says... "direct I/o not available"
> 
> I have deleted the logic prefs, made a fresh autoload.... Reinstalled logic
> on another drive and opened the song..... I STILL get that error when I try
> to bounce!!
> The song was started after All the digi hard/software was off the
> machine....
> Please help save my hair!!!!
> Tony
> 
> I NEED TO BOUNCE TODAY!!!!!!!

on 8/19/01 6:24 AM, Martin Karlegard at mardy@... wrote:

> Hi,
> You should change the master fader's device from DIO to ASIO. Just select it
> and look in the parameter list on the left side of the screen. For some
> reason Logic sometimes doesn't change that when you switch hardware.
> Mardyk
> 
> 
>>  
>> 
>> [LAP-Mac]Direct I/o not available....
>> 
>> Hi,
>> I've got one that has stumped me for two weeks..... Please help....
>> Im using LAP 4.7.3 on a G4 400 agp with 760ram writing to internal 7200 rpm
>> ata drives. I use an M-Audio delta 44 the EXS/Absynth/ and some plugins...
>> I was originally using an audiomedia 3 card and direct I/O....
>> I removed the AM3 card and installed the Delta... I removed all digidesign
>> extensions and control panels. And installed the Delta extensions/CP's......
>> I than set up LAP for the new hardware..... I unchecked dir I/o and checked
>> asio2.....
>> All seemed fine so I began working on a sound for video piece.....
>> 
>> After calling up 20 exs's and 2 absynth modules I started to get "disk too
>> slow errors", I decided to bounce some tracks to audio, but when I hit the
>> bounce button I get an error that says... "direct I/o not available"
>> 
>> I have deleted the logic prefs, made a fresh autoload.... Reinstalled logic
>> on another drive and opened the song..... I STILL get that error when I try
>> to bounce!!
>> The song was started after All the digi hard/software was off the
>> machine....
>> Please help save my hair!!!!
>> Tony
>> 
>> I NEED TO BOUNCE TODAY!!!!!!!
> 
> 
> To unsubscribe from this group, send an email to:
> exs-users-unsubscribe@egroups.com
> 
> 
> 
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
> 
> 



YESSSS!!!!!!
That did it!!!!!
Thank You SOOOOOOOOOO MUCH!!!
Tony!