Re: [exs] Updated MPC2000XL sets
2002-04-15 by StudioTM
Thanks Sacha for your expert support!!!!! My work was just a raw CDExtract conversion Thor Mamen
Show quoted textHide quoted text
----- Original Message -----
From: Sascha Franck
To: exs-users@yahoogroups.com
Sent: Monday, April 15, 2002 2:11 PM
Subject: [exs] Updated MPC2000XL sets
First of: Thanks to Thor Mamen for doing the initial conversion.
Unfortunately I found the sets to have some weird settings, so I fixed them,
here's what I did:
- Replaced the groups with proper named and proper working ones (hat groups
set to 1 voice max.).
- Added the missing zones for the kicks in some sets (the samples have
allready been in the zips).
- Added some zone for a kick on B0 in case there was none (in the GM
standard you will most likely find a deeper kick there).
- Exchanged some snares (lower tone = D1, higher tone = E1, again following
the GM conventions).
- Set all zones to "one shot".
- Adjusted the amp ADSR to be suitable for drums.
http://www.saschafranck.de/exs/MPC2000XL.zip
Regards,
Sascha
Yahoo! Groups Sponsor
ADVERTISEMENT
To unsubscribe from this group, send an email to:
exs-users-unsubscribe@egroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]