EXS 24 Logic Sampler Users Group

Hi, i searched the archives and still have found little to help me:(
i am running p3 800mghz 512ram 2 30gig wd drives(one for programs and 
one for recording to) win98 using logic audio platinum 4.5, ive tried 
upgrading to 6 but it starts updating then says no update needed?!
installed es-1, prompted for cd, read it and bang, es1 works!!!
installed exs24 fine, then it goes into the "please insert exs24 cd"
ok, put the cd in and it reads for 3-5 mintues then reprompts for the 
cd ect ect, i tried uninstalling my 1(one/only) cd-drive and 
reinstalling that, ive also uninstalled my delta 1010, and then 
reinstalled it, and to no avail....the exs24 does not like me, any 
help appreciated!:)

--Damion Champ

Same for me. I have had no luck authorizing at all. Just asks again and
again for the cd ad infinitum.
I have a Mac G3 300 running os 9.1 and Logic 4.6.3. SCSI cd writer
disconnected and still no joy. I do have an Adaptec 2940 uw scsi card  to a
fast audio drive, which I have no idea why it should interfere. I'm sure it
can't. 
Please help. I almost wish I'd used the cracked version I was offered. At
least I would be working now.
Any ideas boffins???????
Peace
Lee

The message sender is using FREE InvisiMail Lite Un-Registered
and is able to send and receive email messages more safely. 
For Information on email Encryption, Anti-Virus and Spam filtering 
Visit http://www.invisimail.com for more details.
______________________________________________________________

    After much messing around I found one problem with EXS24 authorize re-authorize, and found a work-around.  I eMailed eMagic about it so they know... hope they fix it.  
IFF you have an ATAPI CD hooked to one of the DMA / UDMA connections 
AND the Atapi CD is NOT UDMA 
AND you have UDMA drives on the same, or other DMA connector.  
THEN if you disconnect all UDMA devices then the CD will re-authorize correctly.. 
    If you boot from your UDMA device, then you are screwed.  I boot from SCSI.   You might try booting from your Windows CD, or some other emergency procedure.  

  ----- Original Message ----- 
  From: numerology1@... 
  To: exs-users@yahoogroups.com 
  Sent: Monday, March 26, 2001 11:53 AM
  Subject: [exs] EXS24 authorize problems


  Hi, i searched the archives and still have found little to help me:(
  i am running p3 800mghz 512ram 2 30gig wd drives(one for programs and 
  one for recording to) win98 using logic audio platinum 4.5, ive tried 
  upgrading to 6 but it starts updating then says no update needed?!
  installed es-1, prompted for cd, read it and bang, es1 works!!!
  installed exs24 fine, then it goes into the "please insert exs24 cd"
  ok, put the cd in and it reads for 3-5 mintues then reprompts for the 
  cd ect ect, i tried uninstalling my 1(one/only) cd-drive and 
  reinstalling that, ive also uninstalled my delta 1010, and then 
  reinstalled it, and to no avail....the exs24 does not like me, any 
  help appreciated!:)

  --Damion Champ


        Yahoo! Groups Sponsor 
       
       

  To unsubscribe from this group, send an email to:
  exs-users-unsubscribe@egroups.com



  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 



[Non-text portions of this message have been removed]

thanks for the tip, but i found the problem to be that a hidden vxd file in 
my c:/windows/system/ASPIENUM.VXD was keeping exs24 to authorize correctly, 
i removed the file, authorized exs24 and replaced the file and everything is 
running perfectly!:)
Thanks to all the great people that helped me with this problem:)
--Damion Champ

>From: "John Mattson" After much messing around I found one problem with 
>EXS24 authorize re-authorize, and found a work-around. I eMailed eMagic 
>about it so they know... hope they fix it. IFF you have an ATAPI CD hooked 
>to one of the DMA / UDMA connections AND the Atapi CD is NOT UDMA AND you 
>have UDMA drives on the same, or other DMA connector. THEN if you 
>disconnect all UDMA devices then the CD will re-authorize correctly.. If 
>you boot from your UDMA device, then you are screwed. I boot from SCSI. You 
>might try booting from your Windows CD, or some other emergency procedure.


_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com