EXS 24 Logic Sampler Users Group

> Patrick Hall <pbone3b@...>
> Subject: Recycle Problem
> 
> When I try to Convert a Recycle file (.rx2) with the EXS24 now, I get the
> error
> message "Couldn't load the REX shared Library. The file may be corrupt. Please
> re-install REX, then try again"
> 
> Anybody have a clue? Because I sure don't!

I had that recently. I needed a new REX shared library. mine had become
corrupt or was an older version that didn't work properly. I think the
version I have is 1.2.3.

teddybut

>> When I try to Convert a Recycle file (.rx2) with the EXS24 now, I get the
>> error
>> message "Couldn't load the REX shared Library. The file may be corrupt.
>> Please
>> re-install REX, then try again"
>> 
>> Anybody have a clue? Because I sure don't!

patrick

i have this now too in 6.1. maudio is going to get back to me with a fix.
have you figured it out?

teddy

Teddy, Patrick: just had the problem myself when I installed 6.1...

Here¹s the fix, see below, direct from propellerheads... Note it will
require the rex shared library which they emailed to me... I can send this
to you privately if you like.

craig

³This is what happens, the Logic 6.1 installer replaces the REX Shared
Library File with a corrupt version of the file.

To fix this, do the following.

1. Make sure that no applications are running.
2. Locate the REX Shared library file on your Hard disk, it's stored in:

Macintosh HD -> Library -> Application Support

3. Delete this file.
4. Unstuff the proper version of this file, which is attached in this mail.
5. Place this new REX Shared Library File, where the older file was stored,
i.e. in: Macintosh HD -> Library -> Application Support²



When the world turned to 6/17/03 3:52 PM, "teddybut"
<teddybut@...> wrote:

>>> >> When I try to Convert a Recycle file (.rx2) with the EXS24 now, I get the
>>> >> error
>>> >> message "Couldn't load the REX shared Library. The file may be corrupt.
>>> >> Please
>>> >> re-install REX, then try again"
>>> >> 
>>> >> Anybody have a clue? Because I sure don't!
> 
> patrick
> 
> i have this now too in 6.1. maudio is going to get back to me with a fix.
> have you figured it out?
> 
> teddy
> 
> 
> 
> ____________________________________________________________
>                       EXS* Users Group
> - EXS/Logic FAQ: http://logicfaq.omega-art.com/
> - UNSUBSCRIBE: email exs-users-unsubscribe@yahoogroups.com
> - Contact list admin: email exs-users-owner@yahoogroups.com
> - Free legal samples: http://groups.yahoo.com/group/exs-users/links/
> 
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
> 
> 
> 




[Non-text portions of this message have been removed]

On Tuesday, June 17, 2003, at 12:52  PM, teddybut wrote:

> patrick
>
> i have this now too in 6.1. maudio is going to get back to me with a 
> fix.
> have you figured it out?
>
> teddy
>

Go to propellerheads web site and download the rex extension for OSX. 
They have instructions on this "bug" caused by the Logic installer.

George
________________________________________________________
My Home : www.utopiaparkwaymusic.com

EXS/Logic FAQ: http://logicfaq.omega-art.com/

"Reet to tee to tee to tee to teeeeeeee"
Frank Zappa

" All our dreams can come true, if we have the courage to pursue them"
Walt Disney

> Here\ufffds the fix, see below, direct from propellerheads... Note it will
> require the rex shared library which they emailed to me... I can send this
> to you privately if you like.

Is this it?

http://www.propellerheads.se/support/recycle/rex_dl.html

=====
"You blow in this end of the trombone, 
and sound comes out the other end and 
disrupts the cosmos."
Roswell Rudd

Check out Pat's music 
http://www.pbone.org/

__________________________________
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
http://sbc.yahoo.com

Should be 1.2.5 (build 51).
Download it and do a get info... If it matches up, you¹re good to go.

When the world turned to 6/17/03 4:13 PM, "Patrick Hall" <pbone3b@...>
wrote:

> 
>> > Here¹s the fix, see below, direct from propellerheads... Note it will
>> > require the rex shared library which they emailed to me... I can send this
>> > to you privately if you like.
> 
> Is this it?
> 
> http://www.propellerheads.se/support/recycle/rex_dl.html
> 
> 




[Non-text portions of this message have been removed]

yes, I am aware of that problem from props site. I used a new REX shared
library from M-audio. I have replaced it with the file from Props too but no
luck yet. Do I have to trash my recycle prefs or something weird? all the
files are 1.2.5 (build 51)

if you have the file for use in OS9 (their's says it's for OSX) I'd be much
obliged you forwarding it to me.

thanks,
teddy

> ³This is what happens, the Logic 6.1 installer replaces the REX Shared
> Library File with a corrupt version of the file.
> 
> To fix this, do the following.
> 
> 1. Make sure that no applications are running.
> 2. Locate the REX Shared library file on your Hard disk, it's stored in:
> 
> Macintosh HD -> Library -> Application Support
> 
> 3. Delete this file.
> 4. Unstuff the proper version of this file, which is attached in this mail.
> 5. Place this new REX Shared Library File, where the older file was stored,
> i.e. in: Macintosh HD -> Library -> Application Support²

Ah, sorry Teddy, I should have taken a closer look at what system you were
using. I run OS X only.

craig

When the world turned to 6/18/03 5:43 AM, "teddybut"
<teddybut@...> wrote:

> yes, I am aware of that problem from props site. I used a new REX shared
> library from M-audio. I have replaced it with the file from Props too but no
> luck yet. Do I have to trash my recycle prefs or something weird? all the
> files are 1.2.5 (build 51)
> 
> if you have the file for use in OS9 (their's says it's for OSX) I'd be much
> obliged you forwarding it to me.
> 
> thanks,
> teddy
> 
>> > ³This is what happens, the Logic 6.1 installer replaces the REX Shared
>> > Library File with a corrupt version of the file.
>> > 
>> > To fix this, do the following.
>> > 
>> > 1. Make sure that no applications are running.
>> > 2. Locate the REX Shared library file on your Hard disk, it's stored in:
>> > 
>> > Macintosh HD -> Library -> Application Support
>> > 
>> > 3. Delete this file.
>> > 4. Unstuff the proper version of this file, which is attached in this mail.
>> > 5. Place this new REX Shared Library File, where the older file was stored,
>> > i.e. in: Macintosh HD -> Library -> Application Support²
> 
> 
> 
> 
> 




[Non-text portions of this message have been removed]