Mailist to discuss all issues regarding the Digitech GSP-2101 Guitar FX Processor

Hello!

Some have asked me for a PPC210 module for the GSP2101 or the TSR24.
NOW I HAVE THEM AVAILABLE IN A VERY SMALL QUANTITY!
These might be the last PPC210 upgrades ever made, because the parts for 
them are nearly sold out completely!
So you can buy one of the probably last PPC210 modules ever!

Here is what you can purchase now:

PPC210 for Digitech GSP2101

This is a perfect professional replica of the Digitech PPC-210 Module which 
isn't available from Digitech anymore.
It comes with 100% functional guarantee.

The module comes with detailed installation-manual in English and also with 
a CD ROM which contains all necessary software to store your settings and 
patches on your PC over MIDI.
To install the PPC210 module you need software- version 2.00 or higher in 
your GSP2101.

If you don't know which software version you've got:
- switch off the GSP2101
- switch on the GSP2101 while watching the display
- The software-version is shown there while boot up
- E.g. there is shown '2.01.01.a.'
- If you have a lower software version, you have to update the software. A 
software-upgrade kit you will find in my other auctions.

I always recommend upgrading to Software- Version 3.00.00.a.
With this software you'll get the best out of your GSP 2101
All you need to upgrade your GSP2101 you can get from me!

BTW.: the '.a' at the end of the software-version describes, if you're 
GSP2101 runs with 20MHz cycle frequency or not.
If you have a '.a' at the end of the software-version the Z80 (the Z80 is 
the main-processor of your 2101) works with 20 MHz.
If you have no '.a' at the end of the software-version the Z80 works with 10 
MHz only.
If you want to upgrade to 20MHz - no problem!!

The PPC210 comes with SDISC II Processor.
The following information is only for the professionals:
I guarantee that the cannon echo will NOT appear with this PPC210. I have 
found a special way to avoid it.
With this PPC210 there will be NO cannon echo!!!! You will get 100% 
guarantee for that issue!!!

You will get the following benefits by installing the PPC210-module:
 - Create algorithms that use BOTH S-DISCS simultaneously. This means that 
you can now create some pretty big algorithms using more exotic modules than 
with a single S-Disc unit.
 - Switch seamlessly between single S-DISC programs. This allows your 
'Metallica Crunch' program to fade out according to your pre-programmed ramp 
times while the 2101 is loading up your 'Clean Delay' algorithm (because you 
punched it up on your FC-1). The small amount of time it takes the 2101 to 
load the second program is covered up with the sound of your previous 
program fading out, rather than a sharp drop in sound. Furthermore, by 
allowing slow fade and hold times, you can actually blend the two sounds 
together for a few seconds to make the transition smoother. However, note 
that as soon as the switch is made, your input is no longer sent to the 
first program; the sound from that program is merely whatever sound was 
still stored in its delay & reverb buffers.
 Note: you cannot switch seamlessly from or to a Dual-S-DISC program, 
because they require both S-DISCs to operate. However, you can have dual 
S-DISC programs, and still use seamless switching for other (single S-DISC) 
programs. In other words, you don't have to choose between seamless 
switching or Dual S-DISC Programs for your entire unit; just for your 
individual programs. Just realize that there will be a small gap when 
switching to or from Dual S-Disc programs.

The Upgrade contains:
- PPC 210- Module
- Detailed installation manual in German or English (however you want)
- Patch-CD-ROM (500 Patches, archiving-software aso. for the GSP2101)

Price:
The price is: 195EUR. You also can pay in US$.
195EUR = US$259
Shipping: depends to where you live and which shipping options you like to 
have.
Standard world wide shipping is 8EUR = US$10
I accept Paypal, cash, bank transfer (for other methods contact me)
What I need to know from you in case you want one: Your current software 
version

Greets
Dieter