Mailist to discuss all issues regarding the Digitech GSP-2101 Guitar FX Processor

Thanks for the info Dieter!!

Guys i bought one and there's 2 more left in Dieter eBay store.Those 
whose GSP2101 are without it...what are waiting for GET IT NOW!!!

->http://cgi.ebay.com.sg/PPC210-for-Digitech-GSP-2101-GSP2101-PPC-210-
upgrade_W0QQitemZ330135339603QQihZ014QQcategoryZ41419QQssPageNameZWDVW
QQrdZ1QQcmdZViewItem

->http://cgi.ebay.com.sg/PPC210-fuer-Digitech-GSP2101-GSP-2101-
PPC-210-
upgrade_W0QQitemZ330135199660QQihZ014QQcategoryZ46669QQssPageNameZWDVW
QQrdZ1QQcmdZViewItem

--- In gsp-2101@yahoogroups.com, "Dieter Waechter" <dieter@...> wrote:
>
> Hello!
> 
> Some have asked me for a PPC210 module for the GSP2101 or the TSR24.
> NOW I HAVE THEM AVAILABLE IN A VERY SMALL QUANTITY!
> These might be the last PPC210 upgrades ever made, because the 
parts for 
> them are nearly sold out completely!
> So you can buy one of the probably last PPC210 modules ever!
> 
> Here is what you can purchase now:
> 
> PPC210 for Digitech GSP2101
> 
> This is a perfect professional replica of the Digitech PPC-210 
Module which 
> isn't available from Digitech anymore.
> It comes with 100% functional guarantee.
> 
> The module comes with detailed installation-manual in English and 
also with 
> a CD ROM which contains all necessary software to store your 
settings and 
> patches on your PC over MIDI.
> To install the PPC210 module you need software- version 2.00 or 
higher in 
> your GSP2101.
> 
> If you don't know which software version you've got:
> - switch off the GSP2101
> - switch on the GSP2101 while watching the display
> - The software-version is shown there while boot up
> - E.g. there is shown '2.01.01.a.'
> - If you have a lower software version, you have to update the 
software. A 
> software-upgrade kit you will find in my other auctions.
> 
> I always recommend upgrading to Software- Version 3.00.00.a.
> With this software you'll get the best out of your GSP 2101
> All you need to upgrade your GSP2101 you can get from me!
> 
> BTW.: the '.a' at the end of the software-version describes, if 
you're 
> GSP2101 runs with 20MHz cycle frequency or not.
> If you have a '.a' at the end of the software-version the Z80 (the 
Z80 is 
> the main-processor of your 2101) works with 20 MHz.
> If you have no '.a' at the end of the software-version the Z80 
works with 10 
> MHz only.
> If you want to upgrade to 20MHz - no problem!!
> 
> The PPC210 comes with SDISC II Processor.
> The following information is only for the professionals:
> I guarantee that the cannon echo will NOT appear with this PPC210. 
I have 
> found a special way to avoid it.
> With this PPC210 there will be NO cannon echo!!!! You will get 100% 
> guarantee for that issue!!!
> 
> You will get the following benefits by installing the PPC210-module:
>  - Create algorithms that use BOTH S-DISCS simultaneously. This 
means that 
> you can now create some pretty big algorithms using more exotic 
modules than 
> with a single S-Disc unit.
>  - Switch seamlessly between single S-DISC programs. This allows 
your 
> 'Metallica Crunch' program to fade out according to your pre-
programmed ramp 
> times while the 2101 is loading up your 'Clean Delay' algorithm 
(because you 
> punched it up on your FC-1). The small amount of time it takes the 
2101 to 
> load the second program is covered up with the sound of your 
previous 
> program fading out, rather than a sharp drop in sound. Furthermore, 
by 
> allowing slow fade and hold times, you can actually blend the two 
sounds 
> together for a few seconds to make the transition smoother. 
However, note 
> that as soon as the switch is made, your input is no longer sent to 
the 
> first program; the sound from that program is merely whatever sound 
was 
> still stored in its delay & reverb buffers.
>  Note: you cannot switch seamlessly from or to a Dual-S-DISC 
program, 
> because they require both S-DISCs to operate. However, you can have 
dual 
> S-DISC programs, and still use seamless switching for other (single 
S-DISC) 
> programs. In other words, you don't have to choose between seamless 
> switching or Dual S-DISC Programs for your entire unit; just for 
your 
> individual programs. Just realize that there will be a small gap 
when 
> switching to or from Dual S-Disc programs.
> 
> The Upgrade contains:
> - PPC 210- Module
> - Detailed installation manual in German or English (however you 
want)
> - Patch-CD-ROM (500 Patches, archiving-software aso. for the 
GSP2101)
> 
> Price:
> The price is: 195EUR. You also can pay in US$.
> 195EUR = US$259
> Shipping: depends to where you live and which shipping options you 
like to 
> have.
> Standard world wide shipping is 8EUR = US$10
> I accept Paypal, cash, bank transfer (for other methods contact me)
> What I need to know from you in case you want one: Your current 
software 
> version
> 
> Greets
> Dieter
>