Mailist to discuss all issues regarding the Digitech GSP-2101 Guitar FX Processor

I went to my machine to see what your problem might be. If you're 
referring to the patch where the distortion is by-passed, the chorus 
effect is very subtle so try this.
1. First turn the Reverb off to make it easier to see the effects of 
the following ajustments.
2. Press the [Mix] button until you reach the "Wet to Dry Mixer" and 
adjust it to 100% Wet.
3. You can further reduce the direct signal to increase the chorus 
effect. Press the [Mix] button until you get to "Mixer A". Reduce 
Input 3 and Input 4 to around 50% but the final value is up to you.
4. Turn the Reverb back on and adjust the "Reverb Level" to your 
taste. You'll probably need only around 5% since your Wet to Dry 
Mixer is full Wet.
I hope this helps.


--- In gsp-2101@yahoogroups.com, "Bob Snelgrove" <bob@...> wrote:
>
> Grahm
> 
> They were all set to 100%, some panned 50%left some 50% right and 
some center. How do I tell what "Dry" is?
> 
> 
> thx
> 
> bob
> 
> 
>   ----- Original Message ----- 
>   From: Graham Pearson 
>   To: gsp-2101@yahoogroups.com 
>   Sent: Tuesday, September 11, 2007 9:07 AM
>   Subject: Re: [gsp-2101] Re: HELP: No Chorus (2nd Request)
> 
> 
> 
>   Bob:
> 
>   Downstream of the reverb, you'll find one or more mixers.  Make 
sure that none of these mixers is set to 100% dry.
>   Graham
> 
> 
>     ----- Original Message ----- 
>     From: Bob Snelgrove 
>     To: gsp-2101@yahoogroups.com 
>     Sent: Tuesday, September 11, 2007 11:02 AM
>     Subject: Re: [gsp-2101] Re: HELP: No Chorus (2nd Request)
> 
> 
> 
>     Hi Jim
> 
>     I've tried raising the depth, speed and level, changed the 
form, etc.
> 
>     What mixer would I check? This is the alg w/ 
reverb/delay/chorus, not custom.
> 
>     I haven't reset, afraid to lose everything!
> 
>     thx
> 
>     bob
>       ----- Original Message ----- 
>       From: dunkin_donut3 
>       To: gsp-2101@yahoogroups.com 
>       Sent: Tuesday, September 11, 2007 8:26 AM
>       Subject: [gsp-2101] Re: HELP: No Chorus (2nd Request)
> 
> 
>       Bob,
> 
>       I saw your first request but it's a real head scratcher. Have 
you 
>       tried resetting the unit? That should bring it back to stock 
settings 
>       which in fact have workable chorus.
> 
>       Just so I'm straight on this... you've checked all the 
parameters of 
>       the chorus settings?
>