Mailist to discuss all issues regarding the Digitech GSP-2101 Guitar FX Processor

--- In gsp-2101@yahoogroups.com, "Mike" <mswift1974@...> wrote:
>
> My 2101 stopped working.  Removing the cover revealed a white wire
> leading from the front input jack,  but not connected to anything I am
> sure this is the culprit.  Could someone take a decent digital
> photogrph of the inside of there 2101 for me?
> 
> Thanks!
>


here is a diagnosis I received from Dieter after viewing the images:

There are more than 2 problems in your unit!
1. The white wire must be mounted on the left small PCB where the
power switch is soldered.
There was a lug, at position QT1. It is broken away. So solder the
wire to the solder via "QT1".
2. The transformer is loose. fasten it with a screw and a nut!
3. Resistor R522 is blown! its a 10 ohms 1/4 watt carbon film. If you
would replace it, it will probably blow again. Before you replace it
you'll need to remove the defective part in the +-12V circurity. It
can be many parts so you have to measure.